Clk gp mnd

Documentation/devicetree/bindings/clock/qcom,clk-gp-mnd.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,clk-gp-mnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Peripheral Web's PDM GP_MN Clock Divider
+
+maintainers:
+  - Taniya Das <taniya.das@oss.qualcomm.com>
+
+description: |
+  The Peripheral Web's PDM GP_MN clock divider receives an input clock
+  (TCXO4) with frequency Fin and generates an output clock with
+  frequency Fout = Fin * (M / N) and a duty cycle controlled by D
+  and routed over a gpio pin.
+
+  The divider is configured using three registers:
+
+  - GP_MN_CLK_MDIV: holds the M value.
+  - GP_MN_CLK_NDIV: holds the ones complement of (N - M).
+  - GP_MN_CLK_DUTY: holds the D value.
+
+  For every N input clock cycles the GP_MN produces M output clock
+  cycles. D is the number of native clock cycles in which the GP_MN
+  output is low, counted over 2^13 native clock cycles.
+
+  Hardware constraints:
+
+    M <= 511
+    N <= 8191
+    N > 2 * M
+    M < D < (N - M)
+    M and N must be coprime (no common divisor)
+
+properties:
+  compatible:
+    const: qcom,clk-gp-mnd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PDM XO4 source clock
+      - description: PDM AHB bus clock for register access
+
+  clock-names:
+    items:
+      - const: pdm_clk
+      - const: ahb_clk
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  pinctrl-0:
+    description: Pin configuration for the GP_MN output in the active state.
+
+  pinctrl-names:
+    items:
+      - const: active
+
+  assigned-clocks:
+    maxItems: 1
+    description: Parent clock phandle used to set the input frequency.
+
+  assigned-clock-rates:
+    maxItems: 1
+    description: |
+      Rate for the parent clock in Hz.
+      Supported rates: 19200000, 9600000, 6400000, 4800000.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - pinctrl-0
+  - pinctrl-names
+  - assigned-clocks
+  - assigned-clock-rates
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    gp_mn: clock-controller@88d3000 {
+        compatible = "qcom,clk-gp-mnd";
+        reg = <0x88d3000 0xc>;
+        clocks = <&gcc GCC_PDM_XO4_CLK>,
+                 <&gcc GCC_PDM_AHB_CLK>;
+        clock-names = "pdm_clk", "ahb_clk";
+        clock-output-names = "gp_mn_clk";
+        pinctrl-0 = <&gp_mn_pin_active>;
+        pinctrl-names = "active";
+        assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+        assigned-clock-rates = <4800000>;
+        #clock-cells = <0>;
+    };

arch/arm64/boot/dts/qcom/lemans.dtsi

@@ -4045,6 +4045,20 @@
 			};
 		};
 
+		gp_mn: clock-controller@88d3000 {
+			compatible = "qcom,clk-gp-mnd";
+			reg = <0x0 0x088d3000 0x0 0xc>;
+			clocks = <&gcc GCC_PDM_XO4_CLK>,
+				 <&gcc GCC_PDM_AHB_CLK>;
+			clock-names = "pdm_clk", "ahb_clk";
+			clock-output-names = "gp_mn_clk";
+			#clock-cells = <0>;
+			pinctrl-names = "active";
+			pinctrl-0 = <&gp_mn_active>;
+			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+			assigned-clock-rates = <4800000>;
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -5646,6 +5660,13 @@
 				bias-disable;
 			};
 
+			gp_mn_active: gp_mn_active-state {
+				pins = "gpio35";
+				function = "gp_mn";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			hs0_mi2s_active: hs0-mi2s-active-state {
 				pins = "gpio114", "gpio115", "gpio116", "gpio117";
 				function = "hs0_mi2s";

arch/arm64/boot/dts/qcom/monaco.dtsi

@@ -4803,6 +4803,20 @@
 			};
 		};
 
+		gp_mn: clock-controller@88d3000 {
+			compatible = "qcom,clk-gp-mnd";
+			reg = <0x0 0x088d3000 0x0 0xc>;
+			clocks = <&gcc GCC_PDM_XO4_CLK>,
+				 <&gcc GCC_PDM_AHB_CLK>;
+			clock-names = "pdm_clk", "ahb_clk";
+			clock-output-names = "gp_mn_clk";
+			#clock-cells = <0>;
+			pinctrl-names = "active";
+			pinctrl-0 = <&gp_mn_active>;
+			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+			assigned-clock-rates = <4800000>;
+		};
+
 		usb_1_hsphy: phy@8904000 {
 			compatible = "qcom,qcs8300-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -6269,6 +6283,13 @@
 				bias-disable;
 			};
 
+			gp_mn_active: gp_mn_active-state {
+				pins = "gpio32";
+				function = "gp_mn";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			hs0_mi2s_active: hs0-mi2s-active-state {
 				pins = "gpio106", "gpio107", "gpio108", "gpio109";
 				function = "hs0_mi2s";

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -4347,6 +4347,20 @@
 			usb-role-switch;
 		};
 
+		gp_mn: clock-controller@88d3000 {
+			compatible = "qcom,clk-gp-mnd";
+			reg = <0x0 0x088d3000 0x0 0xc>;
+			clocks = <&gcc GCC_PDM_XO4_CLK>,
+				 <&gcc GCC_PDM_AHB_CLK>;
+			clock-names = "pdm_clk", "ahb_clk";
+			clock-output-names = "gp_mn_clk";
+			#clock-cells = <0>;
+			pinctrl-names = "active";
+			pinctrl-0 = <&gp_mn_active>;
+			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+			assigned-clock-rates = <4800000>;
+		};
+
 		qspi: spi@88dc000 {
 			compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x1000>;
@@ -5852,6 +5866,13 @@
 				function = "edp_hot";
 			};
 
+			gp_mn_active: gp_mn_active-state {
+				pins = "gpio35";
+				function = "gp_mn";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			mi2s0_data0: mi2s0-data0-state {
 				pins = "gpio98";
 				function = "mi2s0_data0";

drivers/clk/qcom/Kconfig

@@ -1635,4 +1635,19 @@ config SM_VIDEOCC_8450
 	  SM8450 or SM8475 devices.
 	  Say Y if you want to support video devices and functionality such as
 	  video encode/decode.
+
+config QCOM_CLK_GP_MND
+	tristate "Qualcomm PDM GP_MN clock divider"
+	depends on ARM64 || COMPILE_TEST
+	help
+	  Support for the Qualcomm PDM GP_MN clock divider found in PDM
+	  (Pulse Density Modulation) hardware blocks.
+	  Given an input clock of frequency Fin (TCXO4), the output
+	  frequency is Fout = Fin * (M / N).  For every N input cycles
+	  the divider produces M output cycles.  D controls the duty
+	  cycle: it is the number of native clock cycles in which the
+	  GP_MN output is low, counted over 8192 native clock cycles.
+
+	  Say Y or M if you want to support GP_MN-based frequency and
+	  duty-cycle configuration on Qualcomm SoCs.
 endif

drivers/clk/qcom/Makefile

@@ -193,6 +193,7 @@ obj-$(CONFIG_SM_VIDEOCC_8450) += videocc-sm8450.o
 obj-$(CONFIG_SM_VIDEOCC_8550) += videocc-sm8550.o
 obj-$(CONFIG_SM_VIDEOCC_MILOS) += videocc-milos.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
+obj-$(CONFIG_QCOM_CLK_GP_MND) += clk-gp-mnd.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
 obj-$(CONFIG_KRAITCC) += krait-cc.o