FMEA template bug fix and feature/component alignment

docs/features/feature_example/safety_analysis/fmea.rst

@@ -40,10 +40,9 @@ following tables. For all applicable failure initiators, the FMEA has to be perf
 Failure Mode List
 -----------------
 
-Fault Models for sequence diagrams
-  .. list-table:: Fault Models for sequence diagrams
-     :header-rows: 1
-     :widths: 10,20,10,20
+.. list-table:: Fault Models for sequence diagrams
+    :header-rows: 1
+    :widths: 10,20,10,20
 
     * - ID
       - Failure Mode
@@ -127,7 +126,7 @@ For all identified applicable failure initiators, the FMEA is performed in the f
        :sufficient: <yes|no>
        :status: <valid|invalid>
 
- .. note::   Argument is inside the 'content'. Therefore content is mandatory.
+      .. note::   Argument is inside the 'content'. Therefore content is mandatory.
 
 .. attention::
     The above directive must be updated according to your feature FMEA.

score/component_example/docs/safety_analysis/fmea.rst

@@ -37,6 +37,79 @@ FMEA (Failure Modes and Effects Analysis)
 Failure Mode List
 -----------------
 
+.. list-table:: Fault Models for sequence diagrams
+    :header-rows: 1
+    :widths: 10,20,10,20
+
+    * - ID
+      - Failure Mode
+      - Applicability
+      - Rationale
+    * - MF_01_01
+      - message is not received (is a subset/more precise description of MF_01_05)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_02
+      - message received too late (only relevant if delay is a realistic fault)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_03
+      - message received too early (usually not a problem)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_04
+      - message not received correctly by all recipients (different messages or messages partly lost). Only relevant if the same message goes to multiple recipients.
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_05
+      - message is corrupted
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_06
+      - message is not sent
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - MF_01_07
+      - message is unintended sent
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - CO_01_01
+      - minimum constraint boundary is violated
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - CO_01_02
+      - maximum constraint boundary is violated
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_01
+      - Process calculates wrong result(s) (is a subset/more precise description of MF_01_05 or MF_01_04). This failure mode is related to the analysis if e.g. internal safety mechanisms are required (level 2 function, plausibility check of the output, …) because of the size / complexity of the feature.
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_02
+      - processing too slow (only relevant if timing is considered)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_03
+      - processing too fast (only relevant if timing is considered)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_04
+      - loss of execution
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_05
+      - processing changes to arbitrary process
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+    * - EX_01_06
+      - processing is not complete (infinite loop)
+      - <yes | no>
+      - <Rationale if not applicable, otherwise link to filled out FMEA>
+
+FMEA
+----
+For all identified applicable failure initiators, the FMEA is performed in the following section.
+
 .. code-block:: rst
 
     .. comp_saf_fmea:: <Title>
@@ -49,7 +122,7 @@ Failure Mode List
        :sufficient: <yes|no>
        :status: <valid|invalid>
 
-.. note::   argument is inside the 'content'. Therefore content is mandatory
+      .. note::   argument is inside the 'content'. Therefore content is mandatory
 
 .. attention::
     The above directive must be updated according to your component FMEA.