config: update fsp default configs

Author: rizlik

config/examples/kontron_vx3060_s2.config

@@ -1,8 +1,8 @@
 ARCH=x86_64
 TARGET=kontron_vx3060_s2
 WOLFBOOT_SMALL_STACK=0
-SIGN=ECC384
-HASH=SHA384
+SIGN=ECC256
+HASH=SHA256
 DEBUG=1
 SPMATH=1
 ENCRYPTION=0
@@ -13,7 +13,9 @@ FORCE_32BIT=1
 WOLFBOOT_PARTITION_BOOT_ADDRESS=0xff400000
 WOLFBOOT_PARTITION_SWAP_ADDRESS=0x0
 WOLFBOOT_PARTITION_UPDATE_ADDRESS=0x0
-WOLFBOOT_LOAD_BASE=0x4000000
+
+# 128mb
+WOLFBOOT_LOAD_BASE=0x8000000
 WOLFBOOT_LOAD_ADDRESS=0x1000000
 
 # required for keytools
@@ -26,7 +28,7 @@ FSP_S_UPD_DATA_BASE=0xffd00000
 FSP_T_BASE=0xfff59000
 FSP_M_BASE=0xfff60000
 
-WOLFBOOT_ORIGIN=0xfff20000
+WOLFBOOT_ORIGIN=0xfff00000
 # 4 MB
 BOOTLOADER_PARTITION_SIZE=0x600000
 # 12 MB
@@ -50,12 +52,15 @@ PCI_ECAM_BASE=0xC0000000
 PCI_USE_ECAM=1
 PCH_HAS_PCR=1
 
-WOLFTPM=0
 64BIT=1
 ELF=1
 DEBUG_ELF=0
 MULTIBOOT2=1
 
-STAGE1_AUTH=1
 FSP_S_LOAD_BASE=0x0FED5F00
-
+STAGE1_AUTH=1
+# MEASURED_BOOT=1
+# MEASURED_PCR_A=0
+# DISK_LOCK=1
+# WOLFTPM=1
+# WOLFBOOT_TPM_SEAL=1

config/examples/x86_fsp_qemu_tpm.config

@@ -1,8 +1,8 @@
 ARCH=x86_64
 TARGET=x86_fsp_qemu
 WOLFBOOT_SMALL_STACK=0
-SIGN?=ECC384
-HASH?=SHA384
+SIGN?=ECC256
+HASH?=SHA256
 DEBUG=1
 SPMATH=1
 FORCE_32BIT=1
@@ -11,7 +11,10 @@ WOLFBOOT_NO_PARTITIONS=1
 WOLFTPM=1
 
 # Measured boot
-WOLFBOOT_MEASURED_BOOT=1
+MEASURED_BOOT=1
+MEASURED_PCR_A=0
+WOLFBOOT_TPM_SEAL=1
+DISK_LOCK=1
 
 # TPM Keystore options
 #WOLFBOOT_TPM_KEYSTORE?=1
@@ -33,10 +36,10 @@ FSP_M_BASE=0xffe30000
 FSP_S_BASE=0xffed6000
 FSP_T_BASE=0xfffe0000
 FSP_S_LOAD_BASE=0x0FED5F00
-WOLFBOOT_ORIGIN=0xfffa0000
+WOLFBOOT_ORIGIN=0xfff90000
 LINUX_PAYLOAD=1
 
-BOOTLOADER_PARTITION_SIZE=0xa0000
+BOOTLOADER_PARTITION_SIZE=0xb0000
 BIOS_REGION_SIZE=0x800000
 MACHINE_OBJ=src/x86/qemu_fsp.o
 FSP_T_BIN=./src/x86/fsp_t.bin