output heatfluxes per surface

Author: pcarruscag

SU2_CFD/include/output/CFlowOutput.hpp

@@ -140,21 +140,38 @@ class CFlowOutput : public CFVMOutput{
    * \brief Add aerodynamic coefficients as output fields
    * \param[in] config - Definition of the particular problem.
    */
-  void AddAerodynamicCoefficients(CConfig *config);
+  void AddAerodynamicCoefficients(const CConfig* config);
 
   /*!
    * \brief  Set the value of the aerodynamic coefficients
    * \param[in] config - Definition of the particular problem.
    * \param[in] flow_solver - The container holding all solution data.
    */
-  void SetAerodynamicCoefficients(CConfig *config, CSolver *flow_solver);
+  void SetAerodynamicCoefficients(const CConfig* config, const CSolver* flow_solver);
 
   /*!
-   * \brief  Set the value of the rotating frame coefficients (CT, CQ and CMerit).
+   * \brief Add heat flux coefficients as output fields
    * \param[in] config - Definition of the particular problem.
+   */
+  void AddHeatCoefficients(const CConfig* config);
+
+  /*!
+   * \brief  Set the value of the heat flux coefficients
+   * \param[in] config - Definition of the particular problem.
+   * \param[in] flow_solver - The container holding all solution data.
+   */
+  void SetHeatCoefficients(const CConfig* config, const CSolver* flow_solver);
+
+  /*!
+   * \brief Add rotating frame coefficients as output fields.
+   */
+  void AddRotatingFrameCoefficients();
+
+  /*!
+   * \brief Set the value of the rotating frame coefficients (CT, CQ and CMerit).
    * \param[in] flow_solver - The container holding all solution data.
    */
-  void SetRotatingFrameCoefficients(CConfig *config, CSolver *flow_solver);
+  void SetRotatingFrameCoefficients(const CSolver* flow_solver);
 
   /*!
    * \brief Add CP inverse design output as history fields

SU2_CFD/include/solvers/CFVMFlowSolverBase.hpp

@@ -2014,7 +2014,7 @@ class CFVMFlowSolverBase : public CSolver {
    * \brief Provide the total heat load.
    * \return Value of the heat load (viscous contribution).
    */
-  inline su2double GetTotal_HeatFlux(void) const final { return Total_Heat; }
+  inline su2double GetTotal_HeatFlux() const final { return Total_Heat; }
 
   /*!
    * \brief Provide the total heat load.

SU2_CFD/src/output/CFlowCompOutput.cpp

@@ -167,36 +167,14 @@ void CFlowCompOutput::SetHistoryOutputFields(CConfig *config){
   AddHistoryOutput("LINSOL_RESIDUAL", "LinSolRes", ScreenOutputFormat::FIXED, "LINSOL", "Residual of the linear solver.");
   AddHistoryOutputFields_ScalarLinsol(config);
 
-  /// BEGIN_GROUP: ROTATING_FRAME, DESCRIPTION: Coefficients related to a rotating frame of reference.
-  /// DESCRIPTION: Merit
-  AddHistoryOutput("FIGURE_OF_MERIT", "CMerit", ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "Merit", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: CT
-  AddHistoryOutput("THRUST",    "CT",     ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "CT", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: CQ
-  AddHistoryOutput("TORQUE",    "CQ",     ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "CQ", HistoryFieldType::COEFFICIENT);
-  /// END_GROUP
-
-  /// BEGIN_GROUP: EQUIVALENT_AREA, DESCRIPTION: Equivalent area.
-  /// DESCRIPTION: Nearfield obj. function
-  AddHistoryOutput("NEARFIELD_OF", "CNearFieldOF", ScreenOutputFormat::SCIENTIFIC, "EQUIVALENT_AREA", "Nearfield obj. function", HistoryFieldType::COEFFICIENT);
-  /// END_GROUP
-
-  ///   /// BEGIN_GROUP: HEAT_COEFF, DESCRIPTION: Heat coefficients on all surfaces set with MARKER_MONITORING.
-  /// DESCRIPTION: Total heatflux
-  AddHistoryOutput("TOTAL_HEATFLUX", "HF",      ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total heatflux on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: Maximal heatflux
-  AddHistoryOutput("MAXIMUM_HEATFLUX", "maxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total maximum heatflux on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
-  /// END_GROUP
-
   AddHistoryOutput("MIN_DELTA_TIME", "Min DT", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current minimum local time step");
   AddHistoryOutput("MAX_DELTA_TIME", "Max DT", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current maximum local time step");
 
   AddHistoryOutput("MIN_CFL", "Min CFL", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current minimum of the local CFL numbers");
   AddHistoryOutput("MAX_CFL", "Max CFL", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current maximum of the local CFL numbers");
   AddHistoryOutput("AVG_CFL", "Avg CFL", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current average of the local CFL numbers");
 
-  ///   /// BEGIN_GROUP: FIXED_CL, DESCRIPTION: Relevant outputs for the Fixed CL mode
-
+  /// BEGIN_GROUP: FIXED_CL, DESCRIPTION: Relevant outputs for the Fixed CL mode
   if (config->GetFixed_CL_Mode()){
     /// DESCRIPTION: Difference between current and target CL
     AddHistoryOutput("DELTA_CL", "Delta_CL", ScreenOutputFormat::SCIENTIFIC, "FIXED_CL", "Difference between Target CL and current CL", HistoryFieldType::COEFFICIENT);
@@ -207,6 +185,7 @@ void CFlowCompOutput::SetHistoryOutputFields(CConfig *config){
     /// DESCRIPTION: AOA control command by the CL Driver
     AddHistoryOutput("CL_DRIVER_COMMAND", "CL_Driver_Command", ScreenOutputFormat::SCIENTIFIC, "FIXED_CL", "CL Driver's control command", HistoryFieldType::RESIDUAL);
   }
+  /// END_GROUP
 
   if (config->GetDeform_Mesh()){
     AddHistoryOutput("DEFORM_MIN_VOLUME", "MinVolume", ScreenOutputFormat::SCIENTIFIC, "DEFORM", "Minimum volume in the mesh");
@@ -215,23 +194,19 @@ void CFlowCompOutput::SetHistoryOutputFields(CConfig *config){
     AddHistoryOutput("DEFORM_RESIDUAL", "DeformRes", ScreenOutputFormat::FIXED, "DEFORM", "Residual of the linear solver for the mesh deformation");
   }
 
-  /*--- Add analyze surface history fields --- */
-
   AddAnalyzeSurfaceOutput(config);
 
-  /*--- Add aerodynamic coefficients fields --- */
-
   AddAerodynamicCoefficients(config);
 
   if (config->GetViscous()) {
     AddHistoryOutput("BUFFET", "Buffet", ScreenOutputFormat::SCIENTIFIC, "AERO_COEFF", "Buffet sensor", HistoryFieldType::COEFFICIENT);
   }
 
-  /*--- Add Cp diff fields ---*/
+  AddHeatCoefficients(config);
 
-  Add_CpInverseDesignOutput();
+  AddRotatingFrameCoefficients();
 
-  /*--- Add nearfield diff fields ---*/
+  Add_CpInverseDesignOutput();
 
   Add_NearfieldInverseDesignOutput();
 
@@ -421,9 +396,6 @@ void CFlowCompOutput::LoadHistoryData(CConfig *config, CGeometry *geometry, CSol
     }
   }
 
-  SetHistoryOutputValue("TOTAL_HEATFLUX",   flow_solver->GetTotal_HeatFlux());
-  SetHistoryOutputValue("MAXIMUM_HEATFLUX", flow_solver->GetTotal_MaxHeatFlux());
-
   SetHistoryOutputValue("MIN_DELTA_TIME", flow_solver->GetMin_Delta_Time());
   SetHistoryOutputValue("MAX_DELTA_TIME", flow_solver->GetMax_Delta_Time());
 
@@ -462,9 +434,11 @@ void CFlowCompOutput::LoadHistoryData(CConfig *config, CGeometry *geometry, CSol
     SetHistoryOutputValue("BUFFET", flow_solver->GetTotal_Buffet_Metric());
   }
 
+  SetHeatCoefficients(config, flow_solver);
+
   /*--- Set rotating frame coefficients --- */
 
-  SetRotatingFrameCoefficients(config, flow_solver);
+  SetRotatingFrameCoefficients(flow_solver);
 
   /*--- Set Cp diff fields ---*/
 

SU2_CFD/src/output/CFlowIncOutput.cpp

@@ -153,25 +153,6 @@ void CFlowIncOutput::SetHistoryOutputFields(CConfig *config){
   if (config->AddRadiation()) AddHistoryOutput("BGS_RAD_ENERGY", "bgs[E_Rad]",  ScreenOutputFormat::FIXED, "BGS_RES", "BGS residual of the radiative energy.", HistoryFieldType::RESIDUAL);
   /// END_GROUP
 
-  /// BEGIN_GROUP: ROTATING_FRAME, DESCRIPTION: Coefficients related to a rotating frame of reference.
-  /// DESCRIPTION: Merit
-  AddHistoryOutput("FIGURE_OF_MERIT", "CMerit", ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "Merit", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: CT
-  AddHistoryOutput("THRUST",    "CT",     ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "CT", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: CQ
-  AddHistoryOutput("TORQUE",    "CQ",     ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "CQ", HistoryFieldType::COEFFICIENT);
-  /// END_GROUP
-
-  /// BEGIN_GROUP: HEAT_COEFF, DESCRIPTION: Heat coefficients on all surfaces set with MARKER_MONITORING.
-  /// DESCRIPTION: Total heatflux
-  AddHistoryOutput("TOTAL_HEATFLUX", "HF",      ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total heatflux on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: Maximal heatflux
-  AddHistoryOutput("MAXIMUM_HEATFLUX", "maxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total maximum heatflux on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
-  /// DESCRIPTION: Temperature
-  if (heat || weakly_coupled_heat)
-    AddHistoryOutput("AVG_TEMPERATURE", "Temp", ScreenOutputFormat::SCIENTIFIC, "HEAT",  "Total avg. temperature on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
-  /// END_GROUP
-
   /// DESCRIPTION: Angle of attack
   AddHistoryOutput("AOA", "AoA", ScreenOutputFormat::SCIENTIFIC,"AOA", "Angle of attack");
   /// DESCRIPTION: Linear solver iterations
@@ -199,14 +180,17 @@ void CFlowIncOutput::SetHistoryOutputFields(CConfig *config){
     AddHistoryOutput("STREAMWISE_HEAT",     "SWHeat",     ScreenOutputFormat::FIXED, "STREAMWISE_PERIODIC", "Integrated heat for streamwise periodic flow");
   }
 
-  /*--- Add analyze surface history fields --- */
-
   AddAnalyzeSurfaceOutput(config);
 
-  /*--- Add aerodynamic coefficients fields --- */
-
   AddAerodynamicCoefficients(config);
 
+  if (heat || weakly_coupled_heat) {
+    AddHeatCoefficients(config);
+    AddHistoryOutput("AVG_TEMPERATURE", "Temp", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Average temperature on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
+  }
+
+  AddRotatingFrameCoefficients();
+
 }
 
 void CFlowIncOutput::LoadHistoryData(CConfig *config, CGeometry *geometry, CSolver **solver) {
@@ -239,25 +223,19 @@ void CFlowIncOutput::LoadHistoryData(CConfig *config, CGeometry *geometry, CSolv
   }
 
   if (weakly_coupled_heat){
-    SetHistoryOutputValue("TOTAL_HEATFLUX",   heat_solver->GetTotal_HeatFlux());
-    SetHistoryOutputValue("MAXIMUM_HEATFLUX", heat_solver->GetTotal_MaxHeatFlux());
-    SetHistoryOutputValue("AVG_TEMPERATURE",  heat_solver->GetTotal_AvgTemperature());
-    SetHistoryOutputValue("RMS_TEMPERATURE",  log10(heat_solver->GetRes_RMS(0)));
-    SetHistoryOutputValue("MAX_TEMPERATURE",  log10(heat_solver->GetRes_Max(0)));
+    SetHeatCoefficients(config, heat_solver);
+    SetHistoryOutputValue("AVG_TEMPERATURE", heat_solver->GetTotal_AvgTemperature());
+    SetHistoryOutputValue("RMS_TEMPERATURE", log10(heat_solver->GetRes_RMS(0)));
+    SetHistoryOutputValue("MAX_TEMPERATURE", log10(heat_solver->GetRes_Max(0)));
     if (multiZone) SetHistoryOutputValue("BGS_TEMPERATURE", log10(heat_solver->GetRes_BGS(0)));
   }
-  if (heat){
-    SetHistoryOutputValue("TOTAL_HEATFLUX",   flow_solver->GetTotal_HeatFlux());
-    SetHistoryOutputValue("MAXIMUM_HEATFLUX", flow_solver->GetTotal_MaxHeatFlux());
-    SetHistoryOutputValue("AVG_TEMPERATURE",  flow_solver->GetTotal_AvgTemperature());
-    if (nDim == 3) SetHistoryOutputValue("RMS_TEMPERATURE", log10(flow_solver->GetRes_RMS(4)));
-    else           SetHistoryOutputValue("RMS_TEMPERATURE", log10(flow_solver->GetRes_RMS(3)));
-
-    if (nDim == 3) SetHistoryOutputValue("MAX_TEMPERATURE", log10(flow_solver->GetRes_Max(4)));
-    else           SetHistoryOutputValue("MAX_TEMPERATURE", log10(flow_solver->GetRes_Max(3)));
-    if (multiZone){
-      if (nDim == 3) SetHistoryOutputValue("BGS_TEMPERATURE", log10(flow_solver->GetRes_BGS(4)));
-      else           SetHistoryOutputValue("BGS_TEMPERATURE", log10(flow_solver->GetRes_BGS(3)));
+  if (heat) {
+    SetHeatCoefficients(config, flow_solver);
+    SetHistoryOutputValue("AVG_TEMPERATURE", flow_solver->GetTotal_AvgTemperature());
+    SetHistoryOutputValue("RMS_TEMPERATURE", log10(flow_solver->GetRes_RMS(nDim + 1)));
+    SetHistoryOutputValue("MAX_TEMPERATURE", log10(flow_solver->GetRes_Max(nDim + 1)));
+    if (multiZone) {
+      SetHistoryOutputValue("BGS_TEMPERATURE", log10(flow_solver->GetRes_BGS(nDim + 1)));
     }
   }
 
@@ -296,7 +274,7 @@ void CFlowIncOutput::LoadHistoryData(CConfig *config, CGeometry *geometry, CSolv
 
   /*--- Set rotating frame coefficients --- */
 
-  SetRotatingFrameCoefficients(config, flow_solver);
+  SetRotatingFrameCoefficients(flow_solver);
 
   /*--- Keep this as last, since it uses the history values that were set. ---*/
 

SU2_CFD/src/output/CFlowOutput.cpp

@@ -1,6 +1,6 @@
 /*!
  * \file CFlowOutput.cpp
- * \brief Main subroutines for compressible flow output
+ * \brief Common functions for flow output.
  * \author R. Sanchez
  * \version 7.3.0 "Blackbird"
  *
@@ -1083,7 +1083,7 @@ void CFlowOutput::LoadSurfaceData(CConfig *config, CGeometry *geometry, CSolver
   SetVolumeOutputValue("Y_PLUS", iPoint, solver[FLOW_SOL]->GetYPlus(iMarker, iVertex));
 }
 
-void CFlowOutput::AddAerodynamicCoefficients(CConfig *config){
+void CFlowOutput::AddAerodynamicCoefficients(const CConfig* config) {
 
   /// BEGIN_GROUP: AERO_COEFF, DESCRIPTION: Sum of the aerodynamic coefficients and forces on all surfaces (markers) set with MARKER_MONITORING.
   /// DESCRIPTION: Drag coefficient
@@ -1141,7 +1141,7 @@ void CFlowOutput::AddAerodynamicCoefficients(CConfig *config){
   AddHistoryOutput("COMBO", "ComboObj", ScreenOutputFormat::SCIENTIFIC, "COMBO", "Combined obj. function value.", HistoryFieldType::COEFFICIENT);
 }
 
-void CFlowOutput::SetAerodynamicCoefficients(CConfig *config, CSolver *flow_solver){
+void CFlowOutput::SetAerodynamicCoefficients(const CConfig* config, const CSolver* flow_solver){
 
   SetHistoryOutputValue("DRAG", flow_solver->GetTotal_CD());
   SetHistoryOutputValue("LIFT", flow_solver->GetTotal_CL());
@@ -1183,14 +1183,58 @@ void CFlowOutput::SetAerodynamicCoefficients(CConfig *config, CSolver *flow_solv
   SetHistoryOutputValue("AOA", config->GetAoA());
 }
 
-void CFlowOutput::SetRotatingFrameCoefficients(CConfig *config, CSolver *flow_solver) {
+void CFlowOutput::AddHeatCoefficients(const CConfig* config) {
+
+  if (!config->GetViscous()) return;
+
+  /// BEGIN_GROUP: HEAT, DESCRIPTION: Heat coefficients on all surfaces set with MARKER_MONITORING.
+  /// DESCRIPTION: Total heatflux
+  AddHistoryOutput("TOTAL_HEATFLUX", "HF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total heatflux on all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
+  /// DESCRIPTION: Maximal heatflux
+  AddHistoryOutput("MAXIMUM_HEATFLUX", "maxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Maximum heatflux across all surfaces set with MARKER_MONITORING.", HistoryFieldType::COEFFICIENT);
+
+  vector<string> Marker_Monitoring;
+  for (auto iMarker = 0u; iMarker < config->GetnMarker_Monitoring(); iMarker++) {
+    Marker_Monitoring.push_back(config->GetMarker_Monitoring_TagBound(iMarker));
+  }
+  /// DESCRIPTION:  Total heatflux
+  AddHistoryOutputPerSurface("TOTAL_HEATFLUX_ON_SURFACE", "HF", ScreenOutputFormat::SCIENTIFIC, "HEAT_SURF", Marker_Monitoring, HistoryFieldType::COEFFICIENT);
+  /// DESCRIPTION:  Total heatflux
+  AddHistoryOutputPerSurface("MAXIMUM_HEATFLUX_ON_SURFACE", "maxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT_SURF", Marker_Monitoring, HistoryFieldType::COEFFICIENT);
+  /// END_GROUP
+}
+
+void CFlowOutput::SetHeatCoefficients(const CConfig* config, const CSolver* flow_solver) {
+
+  if (!config->GetViscous()) return;
+
+  SetHistoryOutputValue("TOTAL_HEATFLUX", flow_solver->GetTotal_HeatFlux());
+  SetHistoryOutputValue("MAXIMUM_HEATFLUX", flow_solver->GetTotal_MaxHeatFlux());
+
+  for (auto iMarker = 0u; iMarker < config->GetnMarker_Monitoring(); iMarker++) {
+    SetHistoryOutputPerSurfaceValue("TOTAL_HEATFLUX_ON_SURFACE", flow_solver->GetSurface_HF_Visc(iMarker), iMarker);
+    SetHistoryOutputPerSurfaceValue("MAXIMUM_HEATFLUX_ON_SURFACE", flow_solver->GetSurface_MaxHF_Visc(iMarker), iMarker);
+  }
+}
+
+void CFlowOutput::AddRotatingFrameCoefficients() {
+  /// BEGIN_GROUP: ROTATING_FRAME, DESCRIPTION: Coefficients related to a rotating frame of reference.
+  /// DESCRIPTION: Merit
+  AddHistoryOutput("FIGURE_OF_MERIT", "CMerit", ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "Thrust over torque", HistoryFieldType::COEFFICIENT);
+  /// DESCRIPTION: CT
+  AddHistoryOutput("THRUST", "CT", ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "Thrust coefficient", HistoryFieldType::COEFFICIENT);
+  /// DESCRIPTION: CQ
+  AddHistoryOutput("TORQUE", "CQ", ScreenOutputFormat::SCIENTIFIC, "ROTATING_FRAME", "Torque coefficient", HistoryFieldType::COEFFICIENT);
+  /// END_GROUP
+}
+
+void CFlowOutput::SetRotatingFrameCoefficients(const CSolver* flow_solver) {
 
   SetHistoryOutputValue("THRUST", flow_solver->GetTotal_CT());
   SetHistoryOutputValue("TORQUE", flow_solver->GetTotal_CQ());
   SetHistoryOutputValue("FIGURE_OF_MERIT", flow_solver->GetTotal_CMerit());
 }
 
-
 void CFlowOutput::Add_CpInverseDesignOutput(){
 
   AddHistoryOutput("INVERSE_DESIGN_PRESSURE", "Cp_Diff", ScreenOutputFormat::FIXED, "CP_DIFF", "Cp difference for inverse design");

SU2_CFD/src/output/CHeatOutput.cpp

@@ -104,8 +104,8 @@ void CHeatOutput::SetHistoryOutputFields(CConfig *config){
   AddHistoryOutput("BGS_TEMPERATURE", "bgs[T]", ScreenOutputFormat::FIXED, "BGS_RES", "Block-Gauss-Seidel residual of the temperature", HistoryFieldType::RESIDUAL);
 
   AddHistoryOutput("TOTAL_HEATFLUX", "HF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total heatflux on all surfaces defined in MARKER_MONITORING", HistoryFieldType::COEFFICIENT);
-  AddHistoryOutput("MAXIMUM_HEATFLUX", "MaxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total maximal heatflux on all surfaces defined in MARKER_MONITORING", HistoryFieldType::COEFFICIENT);
-  AddHistoryOutput("AVG_TEMPERATURE", "AvgTemp", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Total average temperature on all surfaces defined in MARKER_MONITORING", HistoryFieldType::COEFFICIENT);
+  AddHistoryOutput("MAXIMUM_HEATFLUX", "MaxHF", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Maximum heatflux on all surfaces defined in MARKER_MONITORING", HistoryFieldType::COEFFICIENT);
+  AddHistoryOutput("AVG_TEMPERATURE", "AvgTemp", ScreenOutputFormat::SCIENTIFIC, "HEAT", "Average temperature on all surfaces defined in MARKER_MONITORING", HistoryFieldType::COEFFICIENT);
   AddHistoryOutput("CFL_NUMBER", "CFL number", ScreenOutputFormat::SCIENTIFIC, "CFL_NUMBER", "Current value of the CFL number");
 
   AddHistoryOutput("COMBO", "ComboObj", ScreenOutputFormat::SCIENTIFIC, "COMBO", "Combined obj. function value.", HistoryFieldType::COEFFICIENT);