Improve the configuration file for the SA Neg test case

suargi · suargi · commit 7cd542645a30 · 2022-03-10T15:49:10.000+01:00
diff --git a/TestCases/turbulence_models/sa/rae2822/turb_SA_NEG_RAE2822.cfg b/TestCases/turbulence_models/sa/rae2822/turb_SA_NEG_RAE2822.cfg
@@ -14,7 +14,7 @@ RESTART_SOL= NO
 MACH_NUMBER= 0.729
 %
 % Angle of attack (degrees, only for compressible flows)
-AOA= 2.31
+AOA= 20.31
 %
 % Free-stream temperature (288.15 K by default)
 FREESTREAM_TEMPERATURE= 288.15
@@ -61,7 +61,11 @@ NUM_METHOD_GRAD= WEIGHTED_LEAST_SQUARES
 CFL_NUMBER= 2.5
 %
 % Adaptive CFL number (NO, YES)
-CFL_ADAPT= NO
+CFL_ADAPT= YES
+%
+% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
+%                                        CFL max value )
+CFL_ADAPT_PARAM= ( 0.5, 1.5, 400.0, 1000.0 )
 %
 % Number of total iterations
 ITER= 99999
@@ -78,7 +82,7 @@ LINEAR_SOLVER_ITER= 20
 % -------------------------- MULTIGRID PARAMETERS -----------------------------%
 %
 % Multi-Grid Levels (0 = no multi-grid)
-MGLEVEL= 3
+MGLEVEL= 0
 %
 % Multi-grid cycle (V_CYCLE, W_CYCLE, FULLMG_CYCLE)
 MGCYCLE= W_CYCLE
@@ -164,4 +168,4 @@ SURFACE_FILENAME= surface_flow
 OUTPUT_WRT_FREQ= 250
 %
 % Screen output fields 
-SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_NU_TILDE, LIFT, DRAG)
+SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_NU_TILDE, LIFT, DRAG)

Original file line number	Diff line number	Diff line change
`@@ -14,7 +14,7 @@ RESTART_SOL= NO`
`14`	`14`	`MACH_NUMBER= 0.729`
`15`	`15`	`%`
`16`	`16`	`% Angle of attack (degrees, only for compressible flows)`
`17`		`-AOA= 2.31`
	`17`	`+AOA= 20.31`
`18`	`18`	`%`
`19`	`19`	`% Free-stream temperature (288.15 K by default)`
`20`	`20`	`FREESTREAM_TEMPERATURE= 288.15`
`@@ -61,7 +61,11 @@ NUM_METHOD_GRAD= WEIGHTED_LEAST_SQUARES`
`61`	`61`	`CFL_NUMBER= 2.5`
`62`	`62`	`%`
`63`	`63`	`% Adaptive CFL number (NO, YES)`
`64`		`-CFL_ADAPT= NO`
	`64`	`+CFL_ADAPT= YES`
	`65`	`+%`
	`66`	`+% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,`
	`67`	`+% CFL max value )`
	`68`	`+CFL_ADAPT_PARAM= ( 0.5, 1.5, 400.0, 1000.0 )`
`65`	`69`	`%`
`66`	`70`	`% Number of total iterations`
`67`	`71`	`ITER= 99999`
`@@ -78,7 +82,7 @@ LINEAR_SOLVER_ITER= 20`
`78`	`82`	`% -------------------------- MULTIGRID PARAMETERS -----------------------------%`
`79`	`83`	`%`
`80`	`84`	`% Multi-Grid Levels (0 = no multi-grid)`
`81`		`-MGLEVEL= 3`
	`85`	`+MGLEVEL= 0`
`82`	`86`	`%`
`83`	`87`	`% Multi-grid cycle (V_CYCLE, W_CYCLE, FULLMG_CYCLE)`
`84`	`88`	`MGCYCLE= W_CYCLE`
`@@ -164,4 +168,4 @@ SURFACE_FILENAME= surface_flow`
`164`	`168`	`OUTPUT_WRT_FREQ= 250`
`165`	`169`	`%`
`166`	`170`	`% Screen output fields`
`167`		`-SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_NU_TILDE, LIFT, DRAG)`
	`171`	`+SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_NU_TILDE, LIFT, DRAG)`