Updating regression CFL adapt params.

economon · economon · commit 1575fbde9b66 · 2020-06-06T22:30:24.000-07:00
diff --git a/TestCases/optimization_euler/multiobjective_wedge/inv_wedge_ROE_multiobj.cfg b/TestCases/optimization_euler/multiobjective_wedge/inv_wedge_ROE_multiobj.cfg
@@ -92,7 +92,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 1.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 2.0, 1.0, 100.0 )
 %
 % Runge-Kutta alpha coefficients
 RK_ALPHA_COEFF= ( 0.66667, 0.66667, 1.000000 )
diff --git a/TestCases/optimization_euler/multiobjective_wedge/inv_wedge_ROE_multiobj_combo.cfg b/TestCases/optimization_euler/multiobjective_wedge/inv_wedge_ROE_multiobj_combo.cfg
@@ -94,7 +94,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 1.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 2.0, 1.0, 100.0 )
 %
 % Runge-Kutta alpha coefficients
 RK_ALPHA_COEFF= ( 0.66667, 0.66667, 1.000000 )
diff --git a/TestCases/optimization_euler/steady_oneram6/inv_ONERAM6_adv.cfg b/TestCases/optimization_euler/steady_oneram6/inv_ONERAM6_adv.cfg
@@ -92,7 +92,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 1.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 1.0, 100.0 )
 %
 % Runge-Kutta alpha coefficients
 RK_ALPHA_COEFF= ( 0.66667, 0.66667, 1.000000 )
diff --git a/TestCases/parallel_regression.py b/TestCases/parallel_regression.py
@@ -718,7 +718,7 @@ def main():
     rot_naca0012.cfg_dir   = "rotating/naca0012"
     rot_naca0012.cfg_file  = "rot_NACA0012.cfg"
     rot_naca0012.test_iter = 25
-    rot_naca0012.test_vals = [-2.613840, 2.932659, -0.078921, 0.002265] #last 4 columns
+    rot_naca0012.test_vals = [-2.676869, 2.865489, -0.079572, 0.002267] #last 4 columns
     rot_naca0012.su2_exec  = "parallel_computation.py -f"
     rot_naca0012.timeout   = 1600
     rot_naca0012.tol       = 0.00001
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq.cfg
@@ -91,7 +91,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 EXT_ITER= 10
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq_1c.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq_1c.cfg
@@ -106,7 +106,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 ITER= 99999
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq_2c.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq_2c.cfg
@@ -106,7 +106,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 ITER= 99999
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq_3c.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq_3c.cfg
@@ -106,7 +106,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 ITER= 99999
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq_p1c1.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq_p1c1.cfg
@@ -106,7 +106,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 ITER= 99999
diff --git a/TestCases/rans_uq/naca0012/turb_NACA0012_uq_p1c2.cfg b/TestCases/rans_uq/naca0012/turb_NACA0012_uq_p1c2.cfg
@@ -106,7 +106,7 @@ CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value,
 %                                        CFL max value )
-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )
 %
 % Number of total iterations
 ITER= 99999
diff --git a/TestCases/serial_regression.py b/TestCases/serial_regression.py
@@ -846,7 +846,7 @@ def main():
     rot_naca0012.cfg_dir   = "rotating/naca0012"
     rot_naca0012.cfg_file  = "rot_NACA0012.cfg"
     rot_naca0012.test_iter = 25
-    rot_naca0012.test_vals = [-2.613840, 2.932659, -0.078921, 0.002265] #last 4 columns
+    rot_naca0012.test_vals = [-2.657250, 2.889308, -0.079043, 0.002261] #last 4 columns
     rot_naca0012.su2_exec  = "SU2_CFD"
     rot_naca0012.timeout   = 1600
     rot_naca0012.tol       = 0.00001
diff --git a/TestCases/turbomachinery/APU_turbocharger/Jones.cfg b/TestCases/turbomachinery/APU_turbocharger/Jones.cfg
@@ -194,7 +194,7 @@ CFL_NUMBER= 5.0
 CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value, CFL max value )
-CFL_ADAPT_PARAM= ( 1.3, 1.2, 5.0, 30.0)
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 5.0, 30.0)
 %
 %
 % ------------------------ LINEAR SOLVER DEFINITION ---------------------------%
diff --git a/TestCases/turbomachinery/APU_turbocharger/Jones_rst.cfg b/TestCases/turbomachinery/APU_turbocharger/Jones_rst.cfg
@@ -199,7 +199,7 @@ CFL_NUMBER= 5.0
 CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value, CFL max value )
-CFL_ADAPT_PARAM= ( 1.3, 1.2, 5.0, 30.0)
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 5.0, 30.0)
 %
 %
 % ------------------------ LINEAR SOLVER DEFINITION ---------------------------%
diff --git a/TestCases/turbomachinery/centrifugal_blade/centrifugal_blade.cfg b/TestCases/turbomachinery/centrifugal_blade/centrifugal_blade.cfg
@@ -198,7 +198,7 @@ CFL_NUMBER= 10.0
 CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value, CFL max value )
-CFL_ADAPT_PARAM= ( 0.3, 0.4, 10.0, 1000.0)
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 1000.0)
 %
 %
 %
diff --git a/TestCases/turbomachinery/centrifugal_stage/centrifugal_stage.cfg b/TestCases/turbomachinery/centrifugal_stage/centrifugal_stage.cfg
@@ -205,7 +205,7 @@ CFL_NUMBER= 1.0
 CFL_ADAPT= YES
 %
 % Parameters of the adaptive CFL number (factor down, factor up, CFL min value, CFL max value )
-CFL_ADAPT_PARAM= ( 0.3, 0.5, 1.0, 1000.0)
+CFL_ADAPT_PARAM= ( 0.1, 1.2, 1.0, 1000.0)
 %
 %
 %

Original file line number	Diff line number	Diff line change
`@@ -92,7 +92,7 @@ CFL_ADAPT= YES`
`92`	`92`	`%`
`93`	`93`	`% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,`
`94`	`94`	`% CFL max value )`
`95`		`-CFL_ADAPT_PARAM= ( 1.5, 0.5, 1.0, 100.0 )`
	`95`	`+CFL_ADAPT_PARAM= ( 0.1, 2.0, 1.0, 100.0 )`
`96`	`96`	`%`
`97`	`97`	`% Runge-Kutta alpha coefficients`
`98`	`98`	`RK_ALPHA_COEFF= ( 0.66667, 0.66667, 1.000000 )`
Original file line number	Diff line number	Diff line change
`@@ -94,7 +94,7 @@ CFL_ADAPT= YES`
`94`	`94`	`%`
`95`	`95`	`% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,`
`96`	`96`	`% CFL max value )`
`97`		`-CFL_ADAPT_PARAM= ( 1.5, 0.5, 1.0, 100.0 )`
	`97`	`+CFL_ADAPT_PARAM= ( 0.1, 2.0, 1.0, 100.0 )`
`98`	`98`	`%`
`99`	`99`	`% Runge-Kutta alpha coefficients`
`100`	`100`	`RK_ALPHA_COEFF= ( 0.66667, 0.66667, 1.000000 )`
Original file line number	Diff line number	Diff line change
`@@ -91,7 +91,7 @@ CFL_ADAPT= YES`
`91`	`91`	`%`
`92`	`92`	`% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,`
`93`	`93`	`% CFL max value )`
`94`		`-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )`
	`94`	`+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )`
`95`	`95`	`%`
`96`	`96`	`% Number of total iterations`
`97`	`97`	`EXT_ITER= 10`
Original file line number	Diff line number	Diff line change
`@@ -106,7 +106,7 @@ CFL_ADAPT= YES`
`106`	`106`	`%`
`107`	`107`	`% Parameters of the adaptive CFL number (factor down, factor up, CFL min value,`
`108`	`108`	`% CFL max value )`
`109`		`-CFL_ADAPT_PARAM= ( 1.5, 0.5, 10.0, 100.0 )`
	`109`	`+CFL_ADAPT_PARAM= ( 0.1, 1.2, 10.0, 100.0 )`
`110`	`110`	`%`
`111`	`111`	`% Number of total iterations`
`112`	`112`	`ITER= 99999`