diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 9da1ab1502089..f74f47c948af6 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -192,6 +192,10 @@ patternProperties: type: object $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# + "^temperature-sensor@[0-9a-f]+$": + type: object + $ref: /schemas/thermal/qcom-spmi-mbg-tm.yaml# + "^typec@[0-9a-f]+$": type: object $ref: /schemas/usb/qcom,pmic-typec.yaml# diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml new file mode 100644 index 0000000000000..a0ecc9f35cf6e --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC MBG Thermal Monitoring + +maintainers: + - Jishnu Prakash + - Kamal Wadhwa + +description: + Qualcomm's MBG(Master Bandgap) temperature alarm monitors the die + temperature and generates an interrupt if the PMIC die temperature is + over a set of programmable temperature thresholds. It allows monitoring + for both hot and cold, LVL1 and LVL2 thresholds, which makes it different + from the existing temp alarm peripheral. The interrupt comes over SPMI + and the MBG's fault status register gives details to understand whether + it is a hot/cold and LVL1/LVL2 violation. + +properties: + compatible: + const: qcom,pm8775-mbg-tm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + io-channels: + items: + - description: ADC channel, which reports chip die temperature. + + io-channel-names: + items: + - const: thermal + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + - io-channels + - io-channel-names + +allOf: + - $ref: thermal-sensor.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@d700 { + compatible = "qcom,pm8775-mbg-tm"; + reg = <0xd700>; + interrupts = <0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8775_adc 0x3>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + }; +... diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index a6bb01082ec69..f2fc24a3096f8 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -21,6 +21,17 @@ config QCOM_SPMI_ADC_TM5 Thermal client sets threshold temperature for both warm and cool and gets updated when a threshold is reached. +config QCOM_SPMI_MBG_TM + tristate "Qualcomm SPMI PMIC MBG Temperature monitor" + depends on QCOM_SPMI_ADC5_GEN3 + select REGMAP_SPMI + help + This enables a thermal driver for the MBG thermal monitoring device. + It shows up in sysfs as a thermal sensor with single trip point. + It notifies the thermal framework when this trip is violated. The + temperature reported by the thermal sensor reflects the real + time die temperature through ADC channel. + config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index 0fa2512042e78..1bec2746b98d8 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \ tsens-8960.o obj-$(CONFIG_QCOM_SPMI_ADC_TM5) += qcom-spmi-adc-tm5.o +obj-$(CONFIG_QCOM_SPMI_MBG_TM) += qcom-spmi-mbg-tm.o obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_QCOM_LMH) += lmh.o diff --git a/drivers/thermal/qcom/qcom-spmi-mbg-tm.c b/drivers/thermal/qcom/qcom-spmi-mbg-tm.c new file mode 100644 index 0000000000000..60190b341fc7c --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-mbg-tm.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MBG_TEMP_MON2_FAULT_STATUS 0x50 + +#define MON_FAULT_STATUS_MASK GENMASK(7, 4) +#define MON_FAULT_LVL1_UPR 0x5 + +#define MON2_LVL1_UP_THRESH 0x59 + +#define MBG_TEMP_MON2_MISC_CFG 0x5f +#define MON2_UP_THRESH_EN BIT(1) + +#define MBG_TEMP_STEP_MV 8 +#define MBG_TEMP_DEFAULT_TEMP_MV 600 +#define MBG_TEMP_CONSTANT 1000 +#define MBG_MIN_TRIP_TEMP 25000 +#define MBG_MAX_SUPPORTED_TEMP 160000 + +/** + * struct mbg_tm_chip - MBG thermal monitor device data. + * @map: regmap for accessing MBG thermal registers. + * @dev: mbg_tm_chip device. + * @tz_dev: thermal zone device registered with the thermal framework. + * @lock: mbg_tm_chip lock for set trip temperature. + * @base: base register offset for this MBG instance + * @irq: interrupt line used to signal threshold events + * @last_temp: last measured temperature. + * @last_thres_crossed: indicates whether the last interrupt crossed a threshold + * @adc: IIO ADC channel used for temperature sensing + */ +struct mbg_tm_chip { + struct regmap *map; + struct device *dev; + struct thermal_zone_device *tz_dev; + struct mutex lock; + unsigned int base; + int irq; + int last_temp; + bool last_thres_crossed; + struct iio_channel *adc; +}; + +/** + * struct mbg_map_table - temperature to voltage mapping entry + * @min_temp: minimum temperature supported by this mapping entry + * @vtemp0: reference voltage or ADC code corresponding to the temperature + * @tc: temperature coefficient used for conversion calculations + */ +struct mbg_map_table { + int min_temp; + int vtemp0; + int tc; +}; + +static const struct mbg_map_table map_table[] = { + /* minT vtemp0 tc */ + { -60000, 4337, 1967 }, + { -40000, 4731, 1964 }, + { -20000, 5124, 1957 }, + { 0, 5515, 1949 }, + { 20000, 5905, 1940 }, + { 40000, 6293, 1930 }, + { 60000, 6679, 1921 }, + { 80000, 7064, 1910 }, + { 100000, 7446, 1896 }, + { 120000, 7825, 1878 }, + { 140000, 8201, 1859 }, +}; + +static int mbg_tm_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct mbg_tm_chip *chip = thermal_zone_device_priv(tz); + int ret, milli_celsius; + + if (chip->last_thres_crossed) { + dev_dbg(chip->dev, "last_temp: %d\n", chip->last_temp); + chip->last_thres_crossed = false; + *temp = chip->last_temp; + return 0; + } + + ret = iio_read_channel_processed(chip->adc, &milli_celsius); + if (ret < 0) { + dev_err(chip->dev, "Failed to read iio channel with %d\n", ret); + return ret; + } + + *temp = milli_celsius; + + return 0; +} + +static int temp_to_vtemp_mv(int temp) +{ + int idx, vtemp, tc = 0, t0 = 0, vtemp0 = 0; + + for (idx = 0; idx < ARRAY_SIZE(map_table); idx++) + if (temp >= map_table[idx].min_temp && + temp < (map_table[idx].min_temp + 20000)) { + tc = map_table[idx].tc; + t0 = map_table[idx].min_temp; + vtemp0 = map_table[idx].vtemp0; + break; + } + + /* + * Formula to calculate vtemp(mV) from a given temp + * vtemp = (temp - minT) * tc + vtemp0 + * tc, t0 and vtemp0 values are mentioned in the map_table array. + */ + vtemp = ((temp - t0) * tc + vtemp0 * 100000) / 1000000; + + /* step size is 8mV */ + return abs(vtemp - MBG_TEMP_DEFAULT_TEMP_MV) / MBG_TEMP_STEP_MV; +} + +static int mbg_tm_set_trip_temp(struct thermal_zone_device *tz, int low_temp, + int temp) +{ + struct mbg_tm_chip *chip = thermal_zone_device_priv(tz); + int ret = 0; + + guard(mutex)(&chip->lock); + + /* The HW has a limitation that the trip set must be above 25C */ + if (temp > MBG_MIN_TRIP_TEMP && temp < MBG_MAX_SUPPORTED_TEMP) { + ret = regmap_set_bits(chip->map, chip->base + MBG_TEMP_MON2_MISC_CFG, + MON2_UP_THRESH_EN); + if (ret < 0) + return ret; + + ret = regmap_write(chip->map, chip->base + MON2_LVL1_UP_THRESH, + temp_to_vtemp_mv(temp)); + if (ret < 0) + return ret; + } else { + dev_dbg(chip->dev, "Set trip b/w 25C and 160C\n"); + ret = regmap_clear_bits(chip->map, chip->base + MBG_TEMP_MON2_MISC_CFG, + MON2_UP_THRESH_EN); + return ret; + } + + /* + * Configure the last_temp one degree higher, to ensure the + * violated temp is returned to thermal framework when it reads + * temperature for the first time after the violation happens. + * This is needed to account for the inaccuracy in the conversion + * formula used which leads to the thermal framework setting back + * the same thresholds in case the temperature it reads does not + * show violation. + */ + chip->last_temp = temp + MBG_TEMP_CONSTANT; + + return ret; +} + +static const struct thermal_zone_device_ops mbg_tm_ops = { + .get_temp = mbg_tm_get_temp, + .set_trips = mbg_tm_set_trip_temp, +}; + +static irqreturn_t mbg_tm_isr(int irq, void *data) +{ + struct mbg_tm_chip *chip = data; + int ret, val; + + scoped_guard(mutex, &chip->lock) { + ret = regmap_read(chip->map, chip->base + MBG_TEMP_MON2_FAULT_STATUS, &val); + if (ret < 0) + return IRQ_HANDLED; + } + + if (FIELD_GET(MON_FAULT_STATUS_MASK, val) & MON_FAULT_LVL1_UPR) { + chip->last_thres_crossed = true; + dev_dbg(chip->dev, "Notifying Thermal, fault status=%d\n", val); + thermal_zone_device_update(chip->tz_dev, THERMAL_TRIP_VIOLATED); + } else { + dev_dbg(chip->dev, "Lvl1 upper threshold not violated, ignoring interrupt\n"); + } + + return IRQ_HANDLED; +} + +static int mbg_tm_probe(struct platform_device *pdev) +{ + struct mbg_tm_chip *chip; + struct device_node *node = pdev->dev.of_node; + u32 res; + int ret; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &pdev->dev; + + mutex_init(&chip->lock); + + chip->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->map) + return -ENXIO; + + ret = device_property_read_u32(chip->dev, "reg", &res); + if (ret < 0) + return dev_err_probe(chip->dev, ret, "Couldn't read reg property\n"); + + chip->base = res; + + chip->irq = platform_get_irq(pdev, 0); + if (chip->irq < 0) + return dev_err_probe(chip->dev, chip->irq, "Failed to get irq\n"); + + chip->adc = devm_iio_channel_get(&pdev->dev, "thermal"); + if (IS_ERR(chip->adc)) + return dev_err_probe(chip->dev, PTR_ERR(chip->adc), "Failed to get adc channel\n"); + + chip->tz_dev = devm_thermal_of_zone_register(chip->dev, 0, chip, &mbg_tm_ops); + if (IS_ERR(chip->tz_dev)) + return dev_err_probe(chip->dev, PTR_ERR(chip->tz_dev), + "Failed to register sensor\n"); + + return devm_request_threaded_irq(&pdev->dev, chip->irq, NULL, mbg_tm_isr, IRQF_ONESHOT, + node->name, chip); +} + +static const struct of_device_id mbg_tm_match_table[] = { + { .compatible = "qcom,pm8775-mbg-tm" }, + { } +}; +MODULE_DEVICE_TABLE(of, mbg_tm_match_table); + +static struct platform_driver mbg_tm_driver = { + .driver = { + .name = "qcom-spmi-mbg-tm", + .of_match_table = mbg_tm_match_table, + }, + .probe = mbg_tm_probe, +}; +module_platform_driver(mbg_tm_driver); + +MODULE_DESCRIPTION("PMIC MBG Temperature monitor driver"); +MODULE_LICENSE("GPL");