iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS

Use IIO_DECLARE_BUFFER_WITH_TS() to declare the buffer that gets used
with iio_push_to_buffers_with_ts(). This makes the code a bit easier to
read and understand.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-6-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Author: dlech

drivers/iio/accel/sca3300.c

@@ -58,15 +58,6 @@ enum sca3300_scan_indexes {
 	SCA3300_SCAN_MAX
 };
 
-/*
- * Buffer size max case:
- * Three accel channels, two bytes per channel.
- * Temperature channel, two bytes.
- * Three incli channels, two bytes per channel.
- * Timestamp channel, eight bytes.
- */
-#define SCA3300_MAX_BUFFER_SIZE (ALIGN(sizeof(s16) * SCA3300_SCAN_MAX, sizeof(s64)) + sizeof(s64))
-
 #define SCA3300_ACCEL_CHANNEL(index, reg, axis) {			\
 	.type = IIO_ACCEL,						\
 	.address = reg,							\
@@ -193,17 +184,13 @@ struct sca3300_chip_info {
  * @spi: SPI device structure
  * @lock: Data buffer lock
  * @chip: Sensor chip specific information
- * @buffer: Triggered buffer:
- *          -SCA3300: 4 channel 16-bit data + 64-bit timestamp
- *          -SCL3300: 7 channel 16-bit data + 64-bit timestamp
  * @txbuf: Transmit buffer
  * @rxbuf: Receive buffer
  */
 struct sca3300_data {
 	struct spi_device *spi;
 	struct mutex lock;
 	const struct sca3300_chip_info *chip;
-	u8 buffer[SCA3300_MAX_BUFFER_SIZE] __aligned(sizeof(s64));
 	u8 txbuf[4] __aligned(IIO_DMA_MINALIGN);
 	u8 rxbuf[4];
 };
@@ -492,7 +479,7 @@ static irqreturn_t sca3300_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct sca3300_data *data = iio_priv(indio_dev);
 	int bit, ret, val, i = 0;
-	s16 *channels = (s16 *)data->buffer;
+	IIO_DECLARE_BUFFER_WITH_TS(s16, channels, SCA3300_SCAN_MAX);
 
 	iio_for_each_active_channel(indio_dev, bit) {
 		ret = sca3300_read_reg(data, indio_dev->channels[bit].address, &val);
@@ -505,8 +492,7 @@ static irqreturn_t sca3300_trigger_handler(int irq, void *p)
 		channels[i++] = val;
 	}
 
-	iio_push_to_buffers_with_ts(indio_dev, data->buffer,
-				    sizeof(data->buffer),
+	iio_push_to_buffers_with_ts(indio_dev, channels, sizeof(channels),
 				    iio_get_time_ns(indio_dev));
 out:
 	iio_trigger_notify_done(indio_dev->trig);