remoteproc: k3: Refactor reserved_mem_init() functions into common driver

The reserved_mem_init() implementations in the R5, DSP and M4 remoteproc
drivers initialize the reserved memory regions associated with the
remote processor.

Refactor these functions into the ti_k3_common.c driver as
k3_reserved_mem_init() and use this common function throughout in R5,
DSP and M4 drivers.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-36-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Author: 3V3RYONE

drivers/remoteproc/ti_k3_common.c

@@ -469,5 +469,75 @@ void k3_mem_release(void *data)
 }
 EXPORT_SYMBOL_GPL(k3_mem_release);
 
+int k3_reserved_mem_init(struct k3_rproc *kproc)
+{
+	struct device *dev = kproc->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *rmem_np;
+	struct reserved_mem *rmem;
+	int num_rmems;
+	int ret, i;
+
+	num_rmems = of_property_count_elems_of_size(np, "memory-region",
+						    sizeof(phandle));
+	if (num_rmems < 0) {
+		dev_err(dev, "device does not reserved memory regions (%d)\n",
+			num_rmems);
+		return -EINVAL;
+	}
+	if (num_rmems < 2) {
+		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
+			num_rmems);
+		return -EINVAL;
+	}
+
+	/* use reserved memory region 0 for vring DMA allocations */
+	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
+	if (ret) {
+		dev_err(dev, "device cannot initialize DMA pool (%d)\n", ret);
+		return ret;
+	}
+	ret = devm_add_action_or_reset(dev, k3_mem_release, dev);
+	if (ret)
+		return ret;
+
+	num_rmems--;
+	kproc->rmem = devm_kcalloc(dev, num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
+	if (!kproc->rmem)
+		return -ENOMEM;
+
+	/* use remaining reserved memory regions for static carveouts */
+	for (i = 0; i < num_rmems; i++) {
+		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
+		if (!rmem_np)
+			return -EINVAL;
+
+		rmem = of_reserved_mem_lookup(rmem_np);
+		of_node_put(rmem_np);
+		if (!rmem)
+			return -EINVAL;
+
+		kproc->rmem[i].bus_addr = rmem->base;
+		/* 64-bit address regions currently not supported */
+		kproc->rmem[i].dev_addr = (u32)rmem->base;
+		kproc->rmem[i].size = rmem->size;
+		kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
+		if (!kproc->rmem[i].cpu_addr) {
+			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
+				i + 1, &rmem->base, &rmem->size);
+			return -ENOMEM;
+		}
+
+		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
+			i + 1, &kproc->rmem[i].bus_addr,
+			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
+			kproc->rmem[i].dev_addr);
+	}
+	kproc->num_rmems = num_rmems;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(k3_reserved_mem_init);
+
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("TI K3 common Remoteproc code");

drivers/remoteproc/ti_k3_common.h

@@ -113,4 +113,5 @@ void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len,
 int k3_rproc_of_get_memories(struct platform_device *pdev,
 			     struct k3_rproc *kproc);
 void k3_mem_release(void *data);
+int k3_reserved_mem_init(struct k3_rproc *kproc);
 #endif /* REMOTEPROC_TI_K3_COMMON_H */

drivers/remoteproc/ti_k3_dsp_remoteproc.c

@@ -66,76 +66,6 @@ static const struct rproc_ops k3_dsp_rproc_ops = {
 	.get_loaded_rsc_table	= k3_get_loaded_rsc_table,
 };
 
-static int k3_dsp_reserved_mem_init(struct k3_rproc *kproc)
-{
-	struct device *dev = kproc->dev;
-	struct device_node *np = dev->of_node;
-	struct device_node *rmem_np;
-	struct reserved_mem *rmem;
-	int num_rmems;
-	int ret, i;
-
-	num_rmems = of_property_count_elems_of_size(np, "memory-region",
-						    sizeof(phandle));
-	if (num_rmems < 0) {
-		dev_err(dev, "device does not reserved memory regions (%pe)\n",
-			ERR_PTR(num_rmems));
-		return -EINVAL;
-	}
-	if (num_rmems < 2) {
-		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
-			num_rmems);
-		return -EINVAL;
-	}
-
-	/* use reserved memory region 0 for vring DMA allocations */
-	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
-	if (ret) {
-		dev_err(dev, "device cannot initialize DMA pool (%pe)\n",
-			ERR_PTR(ret));
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, k3_mem_release, dev);
-	if (ret)
-		return ret;
-
-	num_rmems--;
-	kproc->rmem = devm_kcalloc(dev, num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
-	if (!kproc->rmem)
-		return -ENOMEM;
-
-	/* use remaining reserved memory regions for static carveouts */
-	for (i = 0; i < num_rmems; i++) {
-		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
-		if (!rmem_np)
-			return -EINVAL;
-
-		rmem = of_reserved_mem_lookup(rmem_np);
-		of_node_put(rmem_np);
-		if (!rmem)
-			return -EINVAL;
-
-		kproc->rmem[i].bus_addr = rmem->base;
-		/* 64-bit address regions currently not supported */
-		kproc->rmem[i].dev_addr = (u32)rmem->base;
-		kproc->rmem[i].size = rmem->size;
-		kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
-		if (!kproc->rmem[i].cpu_addr) {
-			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
-				i + 1, &rmem->base, &rmem->size);
-			return -ENOMEM;
-		}
-
-		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
-			i + 1, &kproc->rmem[i].bus_addr,
-			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
-			kproc->rmem[i].dev_addr);
-	}
-	kproc->num_rmems = num_rmems;
-
-	return 0;
-}
-
 static void k3_dsp_release_tsp(void *data)
 {
 	struct ti_sci_proc *tsp = data;
@@ -214,7 +144,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = k3_dsp_reserved_mem_init(kproc);
+	ret = k3_reserved_mem_init(kproc);
 	if (ret)
 		return dev_err_probe(dev, ret, "reserved memory init failed\n");
 

drivers/remoteproc/ti_k3_m4_remoteproc.c

@@ -21,75 +21,6 @@
 #include "ti_sci_proc.h"
 #include "ti_k3_common.h"
 
-static int k3_m4_reserved_mem_init(struct k3_rproc *kproc)
-{
-	struct device *dev = kproc->dev;
-	struct device_node *np = dev->of_node;
-	struct device_node *rmem_np;
-	struct reserved_mem *rmem;
-	int num_rmems;
-	int ret, i;
-
-	num_rmems = of_property_count_elems_of_size(np, "memory-region",
-						    sizeof(phandle));
-	if (num_rmems < 0) {
-		dev_err(dev, "device does not reserved memory regions (%d)\n",
-			num_rmems);
-		return -EINVAL;
-	}
-	if (num_rmems < 2) {
-		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
-			num_rmems);
-		return -EINVAL;
-	}
-
-	/* use reserved memory region 0 for vring DMA allocations */
-	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
-	if (ret) {
-		dev_err(dev, "device cannot initialize DMA pool (%d)\n", ret);
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, k3_mem_release, dev);
-	if (ret)
-		return ret;
-
-	num_rmems--;
-	kproc->rmem = devm_kcalloc(dev, num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
-	if (!kproc->rmem)
-		return -ENOMEM;
-
-	/* use remaining reserved memory regions for static carveouts */
-	for (i = 0; i < num_rmems; i++) {
-		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
-		if (!rmem_np)
-			return -EINVAL;
-
-		rmem = of_reserved_mem_lookup(rmem_np);
-		of_node_put(rmem_np);
-		if (!rmem)
-			return -EINVAL;
-
-		kproc->rmem[i].bus_addr = rmem->base;
-		/* 64-bit address regions currently not supported */
-		kproc->rmem[i].dev_addr = (u32)rmem->base;
-		kproc->rmem[i].size = rmem->size;
-		kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
-		if (!kproc->rmem[i].cpu_addr) {
-			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
-				i + 1, &rmem->base, &rmem->size);
-			return -ENOMEM;
-		}
-
-		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
-			i + 1, &kproc->rmem[i].bus_addr,
-			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
-			kproc->rmem[i].dev_addr);
-	}
-	kproc->num_rmems = num_rmems;
-
-	return 0;
-}
-
 static void k3_m4_release_tsp(void *data)
 {
 	struct ti_sci_proc *tsp = data;
@@ -170,7 +101,7 @@ static int k3_m4_rproc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = k3_m4_reserved_mem_init(kproc);
+	ret = k3_reserved_mem_init(kproc);
 	if (ret)
 		return dev_err_probe(dev, ret, "reserved memory init failed\n");
 

drivers/remoteproc/ti_k3_r5_remoteproc.c

@@ -761,86 +761,6 @@ static int k3_r5_rproc_configure(struct k3_rproc *kproc)
 	return ret;
 }
 
-static int k3_r5_reserved_mem_init(struct k3_rproc *kproc)
-{
-	struct device *dev = kproc->dev;
-	struct device_node *np = dev_of_node(dev);
-	struct device_node *rmem_np;
-	struct reserved_mem *rmem;
-	int num_rmems;
-	int ret, i;
-
-	num_rmems = of_property_count_elems_of_size(np, "memory-region",
-						    sizeof(phandle));
-	if (num_rmems <= 0) {
-		dev_err(dev, "device does not have reserved memory regions, ret = %d\n",
-			num_rmems);
-		return -EINVAL;
-	}
-	if (num_rmems < 2) {
-		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
-			num_rmems);
-		return -EINVAL;
-	}
-
-	/* use reserved memory region 0 for vring DMA allocations */
-	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
-	if (ret) {
-		dev_err(dev, "device cannot initialize DMA pool, ret = %d\n",
-			ret);
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, k3_mem_release, dev);
-	if (ret)
-		return ret;
-
-	num_rmems--;
-	kproc->rmem = devm_kcalloc(dev, num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
-	if (!kproc->rmem)
-		return -ENOMEM;
-
-	/* use remaining reserved memory regions for static carveouts */
-	for (i = 0; i < num_rmems; i++) {
-		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
-		if (!rmem_np)
-			return -EINVAL;
-
-		rmem = of_reserved_mem_lookup(rmem_np);
-		of_node_put(rmem_np);
-		if (!rmem)
-			return -EINVAL;
-
-		kproc->rmem[i].bus_addr = rmem->base;
-		/*
-		 * R5Fs do not have an MMU, but have a Region Address Translator
-		 * (RAT) module that provides a fixed entry translation between
-		 * the 32-bit processor addresses to 64-bit bus addresses. The
-		 * RAT is programmable only by the R5F cores. Support for RAT
-		 * is currently not supported, so 64-bit address regions are not
-		 * supported. The absence of MMUs implies that the R5F device
-		 * addresses/supported memory regions are restricted to 32-bit
-		 * bus addresses, and are identical
-		 */
-		kproc->rmem[i].dev_addr = (u32)rmem->base;
-		kproc->rmem[i].size = rmem->size;
-		kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
-		if (!kproc->rmem[i].cpu_addr) {
-			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
-				i + 1, &rmem->base, &rmem->size);
-			return -ENOMEM;
-		}
-
-		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
-			i + 1, &kproc->rmem[i].bus_addr,
-			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
-			kproc->rmem[i].dev_addr);
-	}
-	kproc->num_rmems = num_rmems;
-
-	return 0;
-}
-
 /*
  * Each R5F core within a typical R5FSS instance has a total of 64 KB of TCMs,
  * split equally into two 32 KB banks between ATCM and BTCM. The TCMs from both
@@ -1219,7 +1139,7 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
 init_rmem:
 		k3_r5_adjust_tcm_sizes(kproc);
 
-		ret = k3_r5_reserved_mem_init(kproc);
+		ret = k3_reserved_mem_init(kproc);
 		if (ret) {
 			dev_err(cdev, "reserved memory init failed, ret = %d\n",
 				ret);