i2c: davinci: use generic device property accessors

Don't use generic OF APIs if the generic device-level ones will do.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241211102337.37956-3-brgl@bgdev.pl
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Author: Bartosz Golaszewski

drivers/i2c/busses/i2c-davinci.c

@@ -23,9 +23,9 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 
@@ -173,7 +173,6 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	u32 clkh;
 	u32 clkl;
 	u32 input_clock = clk_get_rate(dev->clk);
-	struct device_node *of_node = dev->dev->of_node;
 
 	/* NOTE: I2C Clock divider programming info
 	 * As per I2C specs the following formulas provide prescaler
@@ -207,7 +206,7 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 		psc++;	/* better to run under spec than over */
 	d = (psc >= 2) ? 5 : 7 - psc;
 
-	if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
+	if (device_is_compatible(dev->dev, "ti,keystone-i2c"))
 		d = 6;
 
 	clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000));
@@ -811,7 +810,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	adap->algo = &i2c_davinci_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->timeout = DAVINCI_I2C_TIMEOUT;
-	adap->dev.of_node = pdev->dev.of_node;
+	adap->dev.of_node = dev_of_node(&pdev->dev);
 
 	if (dev->has_pfunc)
 		adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;