rtc: s32g: add NXP S32G2/S32G3 SoC support

Add a RTC driver for NXP S32G2/S32G3 SoCs.

RTC tracks clock time during system suspend. It can be a wakeup source
for the S32G2/S32G3 SoC based boards.

The RTC module from S32G2/S32G3 is not battery-powered and it is not kept
alive during system reset.

Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Author: Ciprian Marian Costea

drivers/rtc/Kconfig

@@ -2108,4 +2108,15 @@ config RTC_DRV_AMLOGIC_A4
 	  This driver can also be built as a module. If so, the module
 	  will be called "rtc-amlogic-a4".
 
+config RTC_DRV_S32G
+	tristate "RTC driver for S32G2/S32G3 SoCs"
+	depends on ARCH_S32 || COMPILE_TEST
+	depends on COMMON_CLK
+	help
+	  Say yes to enable RTC driver for platforms based on the
+	  S32G2/S32G3 SoC family.
+
+	  This RTC module can be used as a wakeup source.
+	  Please note that it is not battery-powered.
+
 endif # RTC_CLASS

drivers/rtc/Makefile

@@ -161,6 +161,7 @@ obj-$(CONFIG_RTC_DRV_RX8111)	+= rtc-rx8111.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
 obj-$(CONFIG_RTC_DRV_RZN1)	+= rtc-rzn1.o
 obj-$(CONFIG_RTC_DRV_RENESAS_RTCA3)	+= rtc-renesas-rtca3.o
+obj-$(CONFIG_RTC_DRV_S32G)	+= rtc-s32g.o
 obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o