dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing

Add properties which can be used to specify LVDS differential output
voltage. Since this also depends on near-end signal termination also
include property which sets this. LVDS differential output voltage is
specified with an array (min, max), which should match the one from
connected device.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241216085410.1968634-2-andrej.picej@norik.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-2-andrej.picej@norik.com

Author: andrejpicej

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml

@@ -80,12 +80,12 @@ properties:
                   - const: 4
 
       port@2:
-        $ref: /schemas/graph.yaml#/properties/port
         description: Video port for LVDS Channel-A output (panel or bridge).
+        $ref: '#/$defs/lvds-port'
 
       port@3:
-        $ref: /schemas/graph.yaml#/properties/port
         description: Video port for LVDS Channel-B output (panel or bridge).
+        $ref: '#/$defs/lvds-port'
 
     required:
       - port@0
@@ -96,6 +96,36 @@ required:
   - reg
   - ports
 
+$defs:
+  lvds-port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          ti,lvds-termination-ohms:
+            description: The value of near end differential termination in ohms.
+            enum: [100, 200]
+            default: 200
+
+          ti,lvds-vod-swing-clock-microvolt:
+            description: LVDS diferential output voltage <min max> for clock
+              lanes in microvolts.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 2
+            maxItems: 2
+
+          ti,lvds-vod-swing-data-microvolt:
+            description: LVDS diferential output voltage <min max> for data
+              lanes in microvolts.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 2
+            maxItems: 2
+
 allOf:
   - if:
       properties: