drm/msm/dsi: correct programming sequence for SM8350 / SM8450

According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
different boundaries for pll_clock_inverters programming. Follow the
vendor code and use correct values.

Fixes: 2f9ae4e ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606947/
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org

Author: lumag

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

@@ -135,7 +135,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
-	} else {
+	} else if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		if (pll_freq <= 1000000000ULL)
 			config->pll_clock_inverters = 0xa0;
 		else if (pll_freq <= 2500000000ULL)
@@ -144,6 +144,16 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
+	} else {
+		/* 4.2, 4.3 */
+		if (pll_freq <= 1000000000ULL)
+			config->pll_clock_inverters = 0xa0;
+		else if (pll_freq <= 2500000000ULL)
+			config->pll_clock_inverters = 0x20;
+		else if (pll_freq <= 3500000000ULL)
+			config->pll_clock_inverters = 0x00;
+		else
+			config->pll_clock_inverters = 0x40;
 	}
 
 	config->decimal_div_start = dec;