CHANGELOG.md

# AdGuard Home Changelog

All notable changes to this project will be documented in this file.

The format is based on [*Keep a Changelog*](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

## [Unreleased]

<!--
## [v0.108.0] – TBA

## [v0.107.75] - 2026-05-01 (APPROX.)

See also the [v0.107.75 GitHub milestone][ms-v0.107.75].

[ms-v0.107.75]: https://github.com/AdguardTeam/AdGuardHome/milestone/110?closed=1

NOTE: Add new changes BELOW THIS COMMENT.
-->

### Changed

- `enable_dnssec` in `dns` configuration now defines whether the proxy should set the DO flag in the upstream requests, the default is `true` ([#7046]).

### Fixed

- Redundant validation warnings about DHCP when it's disabled ([#8348]).

- Safe Browsing and Parental Control labels on the General Settings page not updating after changing the UI language.

[#8348]: https://github.com/AdguardTeam/AdGuardHome/issues/8348
[#7046]: https://github.com/AdguardTeam/AdGuardHome/issues/7046

<!--
NOTE: Add new changes ABOVE THIS COMMENT.
-->

## [v0.107.74] - 2026-04-16

See also the [v0.107.74 GitHub milestone][ms-v0.107.74].

### Security

- Frontend libraries has been updated to prevent the possibility of exploiting the vulnerability described in [CVE-2026-40175][cve-2026-40175].

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.26.2][go-1.26.2].

### Changed

#### Configuration changes

In this release, the schema version has changed from 33 to 34.

- Added a new field `doh` in `http` configuration.

    ```yaml
    # BEFORE:
    'http':
      # …
    'tls':
      # …
      'allow_unencrypted_doh': false

    # AFTER:
    'http':
      # …
      'doh':
        'insecure_enabled': false
        'routes':
          - 'GET /dns-query'
          - 'POST /dns-query'
          - 'GET /dns-query/{ClientID}'
          - 'POST /dns-query/{ClientID}'
    'tls':
      # …
    ```

    To roll back this change, set the `schema_version` back to `33`.

### Fixed

- Incorrect forwarding of root domain requests when domain-specific upstreams are configured ([#7058]).

- The strict SNI check setting is not persisted when the TLS configuration is changed ([#8327]).

- Status reported by the launchd service implementation in cases of scheduled service restart.

- Fixed clients block/unblock when moving clients between allowed and disallowed lists.

[#7058]: https://github.com/AdguardTeam/AdGuardHome/issues/7058
[#8327]: https://github.com/AdguardTeam/AdGuardHome/issues/8327

[cve-2026-40175]: https://nvd.nist.gov/vuln/detail/CVE-2026-40175
[go-1.26.2]:      https://groups.google.com/g/golang-announce/c/0uYbvbPZRWU
[ms-v0.107.74]:   https://github.com/AdguardTeam/AdGuardHome/milestone/109?closed=1

## [v0.107.73] - 2026-03-10

See also the [v0.107.73 GitHub milestone][ms-v0.107.73].

### Security

- Authentication is now applied to requests that have been upgraded from HTTP/2 Cleartext (H2C) requests to public resources.

    **NOTE:** We thank @mandreko for reporting this security issue.

[ms-v0.107.73]: https://github.com/AdguardTeam/AdGuardHome/milestone/108?closed=1

## [v0.107.72] - 2026-02-19

See also the [v0.107.72 GitHub milestone][ms-v0.107.72].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.25.7][go-1.25.7].

### Added

- AdGuard Home now tracks the TLS certificate and key files for updates and reloads them after any updates are detected ([#3962]).

- New query parameter `recent` in `GET /control/stats/` defines statistics lookback period in millieseconds.  See `openapi/openapi.yaml` for details.

- New field `"ignored_enabled"` in `GetStatsConfigResponse` or `GetQueryLogConfigResponse`.  See `openapi/openapi.yaml` for details.

### Changed

- In addition to modifying the contents of a hosts file, deleting or renaming the file now also updates runtime clients and DNS filtering results.

#### Configuration changes

In this release, the schema version has changed from 32 to 33.

- Added a new boolean field `ignored_enabled` in querylog and statistics config.

    ```yaml
    # BEFORE:
    'querylog':
      # …
      'ignored':
      - '|.^'
    'statistics':
      # …
      'ignored':
      - '|.^'

    # AFTER:
    'querylog':
      # …
      'ignored':
      - '|.^'
      'ignored_enabled': true
    'statistics':
      # …
      'ignored':
      - '|.^'
      'ignored_enabled': true
      ```

    To roll back this change, set the `schema_version` back to `32`.

### Fixed

- Executable permissions in some Docker installations ([#8237]).

- Unknown blocked services from both global and client configuration now logged instead of causing server crash.

[#3962]: https://github.com/AdguardTeam/AdGuardHome/issues/3962
[#8237]: https://github.com/AdguardTeam/AdGuardHome/issues/8237

[go-1.25.7]: https://groups.google.com/g/golang-announce/c/K09ubi9FQFk
[ms-v0.107.72]: https://github.com/AdguardTeam/AdGuardHome/milestone/107?closed=1

## [v0.107.71] - 2025-12-08

See also the [v0.107.71 GitHub milestone][ms-v0.107.71].

### Changed

- Stale records in optimistic DNS cache now have an upper age limit controlled by `dns.cache_optimistic_max_age`.  The default value is 12 hours.

- TTL for stale answers from optimistic DNS cache is now controlled by `dns.cache_optimistic_answer_ttl`.  The default value is 30 seconds.

#### Configuration changes

In this release, the schema version has changed from 31 to 32.

- Added a new string fields `dns.cache_optimistic_answer_ttl` and `dns.cache_optimistic_max_age`.

    ```yaml
    # BEFORE:
    'dns':
      'cache_enabled': true
      'cache_optimistic': true
      # …

    # AFTER:
    'dns':
      'cache_enabled': true
      'cache_optimistic': true
      'cache_optimistic_answer_ttl': '30s'
      'cache_optimistic_max_age': '12h'
      # …
      ```

    To roll back this change, set the `schema_version` back to `31`.

### Fixed

- Optimistic DNS cache not working ([#8148]).

[#8148]: https://github.com/AdguardTeam/AdGuardHome/issues/8148

[ms-v0.107.71]: https://github.com/AdguardTeam/AdGuardHome/milestone/106?closed=1

## [v0.107.70] - 2025-12-03

See also the [v0.107.70 GitHub milestone][ms-v0.107.70].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.25.5][go-1.25.5].

### Added

- New field `"start_time"` in the `GET /control/status` response.

### Changed

- Stale records in optimistic DNS cache now have an upper age limit of 12 hours.

- New blocked services UI.

### Fixed

- Generated mobileconfig could not be installed on macOS 26.1.

[go-1.25.5]: https://groups.google.com/g/golang-announce/c/8FJoBkPddm4
[ms-v0.107.70]: https://github.com/AdguardTeam/AdGuardHome/milestone/105?closed=1

## [v0.107.69] - 2025-10-30

See also the [v0.107.69 GitHub milestone][ms-v0.107.69].

### Changed

- Node.js 24 is now used to build the frontend.

### Deprecated

- Node.js 20 and 22 support.

### Fixed

- DHCP settings could not be saved ([#8075]).

- DNS Rewrite edit modal did not populate with the correct values ([#8072]).

### Removed

- The outdated querylog anonymization script.

[#8075]: https://github.com/AdguardTeam/AdGuardHome/issues/8075
[#8072]: https://github.com/AdguardTeam/AdGuardHome/issues/8072

[ms-v0.107.69]: https://github.com/AdguardTeam/AdGuardHome/milestone/104?closed=1

## [v0.107.68] - 2025-10-23

See also the [v0.107.68 GitHub milestone][ms-v0.107.68].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.25.3][go-1.25.3].

### Added

- New DNS rewrite settings endpoints `GET /control/rewrite/settings` and `PUT /control/rewrite/settings/update` ([#1765]).  See `openapi/openapi.yaml` for details.

- New fields `"groups"` and `"group_id"` added to the HTTP API (`GET /control/blocked_services/all`).  See `openapi/openapi.yaml` for the full description.

### Changed

- `POST /control/rewrite/add` and `PUT /control/rewrite/update` now accept the optional field "enabled" ([#1765]).  See `openapi/openapi.yaml` for details.

#### Configuration changes

In this release, the schema version has changed from 30 to 31.

- Added a new boolean field `filtering.rewrites_enabled` to globally enable/disable DNS rewrites.

- Added a new boolean field `enabled` for each entry in `filtering.rewrites` to toggle individual rewrites.

    ```yaml
    # BEFORE:
    'filtering':
      'rewrites':
        - 'domain': test.example
          'answer': 192.0.2.0
      # …

    # AFTER:
    'filtering':
      'rewrites_enabled': true
      'rewrites':
        - 'domain': test.example
          'answer': 192.0.2.0
          'enabled': true
      # …
    ```

    To roll back this change, set `schema_version` back to `30`.

[#1765]: https://github.com/AdguardTeam/AdGuardHome/issues/1765

[go-1.25.3]: https://groups.google.com/g/golang-announce/c/YEyj6FUNbik
[ms-v0.107.68]: https://github.com/AdguardTeam/AdGuardHome/milestone/103?closed=1

## [v0.107.67] - 2025-09-29

See also the [v0.107.67 GitHub milestone][ms-v0.107.67].

### Added

- The *HaGeZi's DNS Rebind Protection* filter for protecting against DNS rebinding attacks ([#102]).

- Support for configuring the suggested default HTTP port for the installation wizard via the `ADGUARD_HOME_DEFAULT_WEB_PORT` environment variable (useful for vendors).

### Changed

- Optimized matching of filtering rules.

### Fixed

- Excessive configuration file overwrites when visiting the Web UI and a non-empty `language` is set.

- Lowered the severity of log messages for failed deletion of old filter files ([#7964]).

[#102]:  https://github.com/AdguardTeam/AdGuardHome/issues/102
[#7964]: https://github.com/AdguardTeam/AdGuardHome/issues/7964

[ms-v0.107.67]: https://github.com/AdguardTeam/AdGuardHome/milestone/102?closed=1

## [v0.107.66] - 2025-09-15

See also the [v0.107.66 GitHub milestone][ms-v0.107.66].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.25.1][go-1.25.1].

### Changed

- Our snap package now uses the `core24` image as its base.

- Outgoing HTTP requests now use the `User-Agent` header `AdGuardHome/v0.107.66` (where `v0.107.66` is the current version) instead of `Go-http-client/1.1` ([#7979]).

### Fixed

- Authentication errors in the Web UI when AdGuard Home is behind a proxy that sets Basic Auth headers ([#7987]).

- The HTTP API `GET /control/profile` endpoint failing when no users were configured ([#7985]).

- Missing warning on the *Encryption Settings* page when using a certificate without an IP address.

[#7979]: https://github.com/AdguardTeam/AdGuardHome/issues/7979
[#7985]: https://github.com/AdguardTeam/AdGuardHome/issues/7985
[#7987]: https://github.com/AdguardTeam/AdGuardHome/issues/7987

[go-1.25.1]:    https://groups.google.com/g/golang-announce/c/PtW9VW21NPs
[ms-v0.107.66]: https://github.com/AdguardTeam/AdGuardHome/milestone/101?closed=1

## [v0.107.65] - 2025-08-20

See also the [v0.107.65 GitHub milestone][ms-v0.107.65].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.6][go-1.24.6].

### Added

- A separate checkbox in the Web UI to enable or disable the global DNS response cache without losing the configured cache size.

- A new `"cache_enabled"` field to the HTTP API (`GET /control/dns_info` and `POST /control/dns_config`).  See `openapi/openapi.yaml` for the full description.

### Changed

#### Configuration changes

In this release, the schema version has changed from 29 to 30.

- Added a new boolean field `dns.cache_enabled` to the configuration.  This field explicitly controls whether DNS caching is enabled, replacing the previous implicit logic based on `dns.cache_size`.

    ```yaml
    # BEFORE:
    'dns':
        # …
        'cache_size': 123456

    # AFTER:
    'dns':
        # …
        'cache_enabled': true
        'cache_size': 123456
    ```

    To roll back this change, set the schema_version back to `29`.

### Fixed

- Disabled state of *Top clients* action button in web UI ([#7923]).

[#7923]: https://github.com/AdguardTeam/AdGuardHome/issues/7923

[go-1.24.6]:    https://groups.google.com/g/golang-announce/c/x5MKroML2yM
[ms-v0.107.65]: https://github.com/AdguardTeam/AdGuardHome/milestone/100?closed=1

## [v0.107.64] - 2025-07-28

See also the [v0.107.64 GitHub milestone][ms-v0.107.64].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.5][go-1.24.5].

### Fixed

- TTL override calculation ([#7903]).
- Validation process for DNSCrypt settings ([#7856]).

[#7856]: https://github.com/AdguardTeam/AdGuardHome/issues/7856
[#7903]: https://github.com/AdguardTeam/AdGuardHome/issues/7903

[go-1.24.5]:    https://groups.google.com/g/golang-announce/c/gTNJnDXmn34
[ms-v0.107.64]: https://github.com/AdguardTeam/AdGuardHome/milestone/99?closed=1

## [v0.107.63] - 2025-06-26

See also the [v0.107.63 GitHub milestone][ms-v0.107.63].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.4][go-1.24.4].

### Fixed

- The hostnames of DHCP clients with multiple labels not being recognized.

- Status reported by the systemd service implementation in cases of auto-restart after a failed start.

[go-1.24.4]:    https://groups.google.com/g/golang-announce/c/ufZ8WpEsA3A
[ms-v0.107.63]: https://github.com/AdguardTeam/AdGuardHome/milestone/98?closed=1

## [v0.107.62] - 2025-05-27

See also the [v0.107.62 GitHub milestone][ms-v0.107.62].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.3][go-1.24.3].

### Fixed

- Clients with CIDR identifiers showing zero requests on the *Settings → Client settings* page ([#2945]).

- Command line option `--update` when the `dns.serve_plain_dns` configuration property was disabled ([#7801]).

- DNS cache not working for custom upstream configurations.

- Validation process for the DNS-over-TLS, DNS-over-QUIC, and HTTPS ports on the *Encryption Settings* page.

- Searching for persistent clients using an exact match for CIDR in the `POST /clients/search` HTTP API.

[#2945]: https://github.com/AdguardTeam/AdGuardHome/issues/2945
[#7801]: https://github.com/AdguardTeam/AdGuardHome/issues/7801

[go-1.24.3]:    https://groups.google.com/g/golang-announce/c/UZoIkUT367A
[ms-v0.107.62]: https://github.com/AdguardTeam/AdGuardHome/milestone/97?closed=1

## [v0.107.61] - 2025-04-22

See also the [v0.107.61 GitHub milestone][ms-v0.107.61].

### Security

- Any simultaneous requests that are considered duplicates will now only result in a single request to upstreams, reducing the chance of a cache poisoning attack succeeding.  This is controlled by the new configuration object `pending_requests`, which has a single `enabled` property, set to `true` by default.

    **NOTE:** We thank [Xiang Li][mr-xiang-li] for reporting this security issue.  It's strongly recommended to leave it enabled, otherwise AdGuard Home will be vulnerable to untrusted clients.

[mr-xiang-li]:  https://lixiang521.com/
[ms-v0.107.61]: https://github.com/AdguardTeam/AdGuardHome/milestone/96?closed=1

## [v0.107.60] - 2025-04-14

See also the [v0.107.60 GitHub milestone][ms-v0.107.60].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.2][go-1.24.2].

### Changed

- Alpine Linux version in `Dockerfile` has been updated to 3.21 ([#7588]).

### Deprecated

- Node 20 support, Node 22 will be required in future releases.

    **NOTE:** `npm` may be replaced with a different tool, such as `pnpm` or `yarn`, in a future release.

### Fixed

- Filtering for DHCP clients ([#7734]).

- Incorrect label on login page ([#7729]).

- Validation process for the HTTPS port on the *Encryption Settings* page.

### Removed

- Node 18 support.

[#7588]: https://github.com/AdguardTeam/AdGuardHome/issues/7588
[#7729]: https://github.com/AdguardTeam/AdGuardHome/issues/7729
[#7734]: https://github.com/AdguardTeam/AdGuardHome/issues/7734

[go-1.24.2]:    https://groups.google.com/g/golang-announce/c/Y2uBTVKjBQk
[ms-v0.107.60]: https://github.com/AdguardTeam/AdGuardHome/milestone/95?closed=1

## [v0.107.59] - 2025-03-21

See also the [v0.107.59 GitHub milestone][ms-v0.107.59].

- Rules with the `client` modifier not working ([#7708]).

- The search form not working in the query log ([#7704]).

[#7704]: https://github.com/AdguardTeam/AdGuardHome/issues/7704
[#7708]: https://github.com/AdguardTeam/AdGuardHome/issues/7708

[ms-v0.107.59]: https://github.com/AdguardTeam/AdGuardHome/milestone/94?closed=1

## [v0.107.58] - 2025-03-19

See also the [v0.107.58 GitHub milestone][ms-v0.107.58].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.24.1][go-1.24.1].

### Added

- The ability to check filtering rules for host names using an optional query type and optional ClientID or client IP address ([#4036]).

- Optional `client` and `qtype` URL query parameters to the `GET /control/check_host` HTTP API.

### Fixed

- Clearing the DNS cache on the *DNS settings* page now includes both global cache and custom client cache.

- Invalid ICMPv6 Router Advertisement messages ([#7547]).

- Disabled button for autofilled login form.

- Formatting of elapsed times less than one millisecond.

- Changes to global upstream DNS settings not applying to custom client upstream configurations.

- The formatting of large numbers in the clients tables on the *Client settings* page ([#7583]).

[#4036]: https://github.com/AdguardTeam/AdGuardHome/issues/4036
[#7547]: https://github.com/AdguardTeam/AdGuardHome/issues/7547
[#7583]: https://github.com/AdguardTeam/AdGuardHome/issues/7583

[go-1.24.1]: https://groups.google.com/g/golang-announce/c/4t3lzH3I0eI
[ms-v0.107.58]: https://github.com/AdguardTeam/AdGuardHome/milestone/93?closed=1

## [v0.107.57] - 2025-02-20

See also the [v0.107.57 GitHub milestone][ms-v0.107.57].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.23.6][go-1.23.6].

### Added

- The ability to specify the upstream timeout in the Web UI.

### Changed

- The *Fastest IP address* upstream mode now correctly collects statistics for all upstream DNS servers.

### Fixed

- The hostnames of DHCP clients not being shown in the *Top clients* table on the dashboard ([#7627]).

- The formatting of large numbers in the upstream table and query log ([#7590]).

[#7590]: https://github.com/AdguardTeam/AdGuardHome/issues/7590
[#7627]: https://github.com/AdguardTeam/AdGuardHome/issues/7627

[go-1.23.6]:    https://groups.google.com/g/golang-announce/c/xU1ZCHUZw3k
[ms-v0.107.57]: https://github.com/AdguardTeam/AdGuardHome/milestone/92?closed=1

## [v0.107.56] - 2025-01-23

See also the [v0.107.56 GitHub milestone][ms-v0.107.56].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.23.5][go-1.23.5].

### Added

- The new HTTP API `POST /clients/search` that finds clients by their IP addresses, CIDRs, MAC addresses, or ClientIDs.  See `openapi/openapi.yaml` for the full description.

### Deprecated

- The `GET /clients/find` HTTP API is deprecated.  Use the new `POST /clients/search` API.

### Fixed

- Request count link in the clients table ([#7513]).

- The formatting of large numbers on the dashboard ([#7329]).

[#7329]: https://github.com/AdguardTeam/AdGuardHome/issues/7329
[#7513]: https://github.com/AdguardTeam/AdGuardHome/issues/7513

[go-1.23.5]: https://groups.google.com/g/golang-announce/c/sSaUhLA-2SI
[ms-v0.107.56]: https://github.com/AdguardTeam/AdGuardHome/milestone/91?closed=1

## [v0.107.55] - 2024-12-11

See also the [v0.107.55 GitHub milestone][ms-v0.107.55].

### Security

- The permission check and migration on Windows has been fixed to use the Windows security model more accurately ([#7400]).

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.23.4][go-1.23.4].

- The Windows executables are now signed.

### Added

- The `--no-permcheck` command-line option to disable checking and migration of permissions for the security-sensitive files and directories, which caused issues on Windows ([#7400]).

### Fixed

- Setup guide styles in Firefox.

- Goroutine leak during the upstream DNS server test ([#7357]).

- Goroutine leak during configuration update resulting in increased response time ([#6818]).

[#7357]: https://github.com/AdguardTeam/AdGuardHome/issues/7357
[#7400]: https://github.com/AdguardTeam/AdGuardHome/issues/7400

[go-1.23.4]: https://groups.google.com/g/golang-announce/c/3DyiMkYx4Fo
[ms-v0.107.55]: https://github.com/AdguardTeam/AdGuardHome/milestone/90?closed=1

## [v0.107.54] - 2024-11-06

See also the [v0.107.54 GitHub milestone][ms-v0.107.54].

### Security

- Incorrect handling of sensitive files permissions on Windows ([#7314]).

### Changed

- Improved filtering performance ([#6818]).

### Fixed

- Repetitive statistics log messages ([#7338]).

- Custom client cache ([#7250]).

- Missing runtime clients with information from the system hosts file on first AdGuard Home start ([#7315]).

[#6818]: https://github.com/AdguardTeam/AdGuardHome/issues/6818
[#7250]: https://github.com/AdguardTeam/AdGuardHome/issues/7250
[#7314]: https://github.com/AdguardTeam/AdGuardHome/issues/7314
[#7315]: https://github.com/AdguardTeam/AdGuardHome/issues/7315
[#7338]: https://github.com/AdguardTeam/AdGuardHome/issues/7338

[ms-v0.107.54]: https://github.com/AdguardTeam/AdGuardHome/milestone/89?closed=1

## [v0.107.53] - 2024-10-03

See also the [v0.107.53 GitHub milestone][ms-v0.107.53].

### Security

- Previous versions of AdGuard Home allowed users to add any system file it had access to as filters, exposing them to be world-readable.  To prevent this, AdGuard Home now allows adding filtering-rule list files only from files matching the patterns enumerated in the `filtering.safe_fs_patterns` property in the configuration file.

    We thank @itz-d0dgy for reporting this vulnerability, designated CVE-2024-36814, to us.

- Additionally, AdGuard Home will now try to change the permissions of its files and directories to more restrictive ones to prevent similar vulnerabilities as well as limit the access to the configuration.

    We thank @go-compile for reporting this vulnerability, designated CVE-2024-36586, to us.

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [1.23.2][go-1.23.2].

### Added

- Support for 64-bit RISC-V architecture ([#5704]).

- Ecosia search engine is now supported in safe search ([#5009]).

### Changed

- Upstream server URL domain names requirements has been relaxed and now follow the same rules as their domain specifications.

#### Configuration changes

In this release, the schema version has changed from 28 to 29.

- The new array `filtering.safe_fs_patterns` contains glob patterns for paths of files that can be added as local filtering-rule lists.  The migration should add list files that have already been added, as well as the default value, `$DATA_DIR/userfilters/*`.

### Fixed

- Property `clients.runtime_sources.dhcp` in the configuration file not taking effect.

- Stale Google safe search domains list ([#7155]).

- Bing safe search from Edge sidebar ([#7154]).

- Text overflow on the query log page ([#7119]).

### Known issues

- Due to the complexity of the Windows permissions architecture and poor support from the standard Go library, we have to postpone the proper automated Windows fix until the next release.

    **Temporary workaround:**  Set the permissions of the `AdGuardHome` directory to more restrictive ones manually.  To do that:

    1. Locate the `AdGuardHome` directory.

    2. Right-click on it and navigate to *Properties → Security → Advanced.*

    3. (You might need to disable permission inheritance to make them more restricted.)

    4. Adjust to give the `Full control` access to only the user which runs AdGuard Home.  Typically, `Administrator`.

[#5009]: https://github.com/AdguardTeam/AdGuardHome/issues/5009
[#5704]: https://github.com/AdguardTeam/AdGuardHome/issues/5704
[#7119]: https://github.com/AdguardTeam/AdGuardHome/issues/7119
[#7154]: https://github.com/AdguardTeam/AdGuardHome/pull/7154
[#7155]: https://github.com/AdguardTeam/AdGuardHome/pull/7155

[go-1.23.2]:    https://groups.google.com/g/golang-announce/c/NKEc8VT7Fz0
[ms-v0.107.53]: https://github.com/AdguardTeam/AdGuardHome/milestone/88?closed=1

## [v0.107.52] - 2024-07-04

See also the [v0.107.52 GitHub milestone][ms-v0.107.52].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.22.5][go-1.22.5].

### Added

- The ability to disable logging using the new `log.enabled` configuration property ([#7079]).

### Changed

- Frontend rewritten in TypeScript.

- The `systemd`-based service now uses `journal` for logging by default.  It also doesn’t create the `/var/log/` directory anymore ([#7053]).

    **NOTE:** With an installed service for changes to take effect, you need to reinstall the service using `-r` flag of the [install script][install-script] or via the CLI (with root privileges):

    ```sh
    ./AdGuardHome -s uninstall
    ./AdGuardHome -s install
    ```

    Don’t forget to backup your configuration file and other important data before reinstalling the service.

### Deprecated

- Node 18 support, Node 20 will be required in future releases.

### Fixed

- Panic caused by missing user-specific blocked services object in configuration file ([#7069]).

- Tracking `/etc/hosts` file changes causing panics within particular filesystems on start ([#7076]).

[#7053]: https://github.com/AdguardTeam/AdGuardHome/issues/7053
[#7069]: https://github.com/AdguardTeam/AdGuardHome/issues/7069
[#7076]: https://github.com/AdguardTeam/AdGuardHome/issues/7076
[#7079]: https://github.com/AdguardTeam/AdGuardHome/issues/7079

[go-1.22.5]:      https://groups.google.com/g/golang-announce/c/gyb7aM1C9H4
[install-script]: https://github.com/AdguardTeam/AdGuardHome/?tab=readme-ov-file#automated-install-linux-and-mac

[ms-v0.107.52]: https://github.com/AdguardTeam/AdGuardHome/milestone/87?closed=1

## [v0.107.51] - 2024-06-06

See also the [v0.107.51 GitHub milestone][ms-v0.107.51].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.22.4][go-1.22.4].

### Changed

- The HTTP server’s write timeout has been increased from 1 minute to 5 minutes to match the one used by AdGuard Home’s HTTP client to fetch filtering-list data ([#7041]).

[#7041]: https://github.com/AdguardTeam/AdGuardHome/issues/7041

[go-1.22.4]:    https://groups.google.com/g/golang-announce/c/XbxouI9gY7k/
[ms-v0.107.51]: https://github.com/AdguardTeam/AdGuardHome/milestone/86?closed=1

## [v0.107.50] - 2024-05-23

See also the [v0.107.50 GitHub milestone][ms-v0.107.50].

### Fixed

- Broken private reverse DNS upstream servers validation causing update failures ([#7013]).

[#7013]: https://github.com/AdguardTeam/AdGuardHome/issues/7013

[ms-v0.107.50]: https://github.com/AdguardTeam/AdGuardHome/milestone/85?closed=1

## [v0.107.49] - 2024-05-21

See also the [v0.107.49 GitHub milestone][ms-v0.107.49].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.22.3][go-1.22.3].

### Added

- Support for comments in the ipset file ([#5345]).

### Changed

- Private rDNS resolution now also affects `SOA` and `NS` requests ([#6882]).

- Rewrite rules mechanics were changed due to improved resolving in safe search.

### Deprecated

- Currently, AdGuard Home skips persistent clients that have duplicate fields when reading them from the configuration file.  This behaviour is deprecated and will cause errors on startup in a future release.

### Fixed

- Acceptance of duplicate UIDs for persistent clients at startup.  See also the section on client settings on the [Wiki page][wiki-config].

- Domain specifications for top-level domains not considered for requests to unqualified domains ([#6744]).

- Support for link-local subnets, i.e. `fe80::/16`, as client identifiers ([#6312]).

- Issues with QUIC and HTTP/3 upstreams on older Linux kernel versions ([#6422]).

- YouTube restricted mode is not enforced by HTTPS queries on Firefox.

- Support for link-local subnets, i.e. `fe80::/16`, in the access settings ([#6192]).

- The ability to apply an invalid configuration for private rDNS, which led to server not starting.

- Ignoring query log for clients with ClientID set ([#5812]).

- Subdomains of `in-addr.arpa` and `ip6.arpa` containing zero-length prefix incorrectly considered invalid when specified for private rDNS upstream servers ([#6854]).

- Unspecified IP addresses aren’t checked when using "Fastest IP address" mode ([#6875]).

[#5345]: https://github.com/AdguardTeam/AdGuardHome/issues/5345
[#5812]: https://github.com/AdguardTeam/AdGuardHome/issues/5812
[#6192]: https://github.com/AdguardTeam/AdGuardHome/issues/6192
[#6312]: https://github.com/AdguardTeam/AdGuardHome/issues/6312
[#6422]: https://github.com/AdguardTeam/AdGuardHome/issues/6422
[#6744]: https://github.com/AdguardTeam/AdGuardHome/issues/6744
[#6854]: https://github.com/AdguardTeam/AdGuardHome/issues/6854
[#6875]: https://github.com/AdguardTeam/AdGuardHome/issues/6875
[#6882]: https://github.com/AdguardTeam/AdGuardHome/issues/6882

[go-1.22.3]:    https://groups.google.com/g/golang-announce/c/wkkO4P9stm0
[ms-v0.107.49]: https://github.com/AdguardTeam/AdGuardHome/milestone/84?closed=1

## [v0.107.48] - 2024-04-05

See also the [v0.107.48 GitHub milestone][ms-v0.107.48].

### Fixed

- Access settings not being applied to encrypted protocols ([#6890]).

[#6890]: https://github.com/AdguardTeam/AdGuardHome/issues/6890

[ms-v0.107.48]: https://github.com/AdguardTeam/AdGuardHome/milestone/83?closed=1

## [v0.107.47] - 2024-04-04

See also the [v0.107.47 GitHub milestone][ms-v0.107.47].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.22.2][go-1.22.2].

### Changed

- Time Zone Database is now embedded in the binary ([#6758]).

- Failed authentication attempts show the originating IP address in the logs, if the request came from a trusted proxy ([#5829]).

### Deprecated

- Go 1.22 support.  Future versions will require at least Go 1.23 to build.

- Currently, AdGuard Home uses a best-effort algorithm to fix invalid IDs of filtering-rule lists on startup.  This feature is deprecated, and invalid IDs will cause errors on startup in a future version.

- Node.JS 16.  Future versions will require at least Node.JS 18 to build.

### Fixed

- Resetting DNS upstream mode when applying unrelated settings ([#6851]).

- Symbolic links to the configuration file begin replaced by a copy of the real file upon startup on FreeBSD ([#6717]).

### Removed

- Go 1.21 support.

[#5829]: https://github.com/AdguardTeam/AdGuardHome/issues/5829
[#6717]: https://github.com/AdguardTeam/AdGuardHome/issues/6717
[#6758]: https://github.com/AdguardTeam/AdGuardHome/issues/6758
[#6851]: https://github.com/AdguardTeam/AdGuardHome/issues/6851

[go-1.22.2]:    https://groups.google.com/g/golang-announce/c/YgW0sx8mN3M/
[ms-v0.107.47]: https://github.com/AdguardTeam/AdGuardHome/milestone/82?closed=1

## [v0.107.46] - 2024-03-20

See also the [v0.107.46 GitHub milestone][ms-v0.107.46].

### Added

- Ability to disable the use of system hosts file information for query resolution ([#6610]).

- Ability to define custom directories for storage of query log files and statistics ([#5992]).

### Changed

- Private rDNS resolution (`dns.use_private_ptr_resolvers` in YAML configuration) now requires a valid "Private reverse DNS servers", when enabled ([#6820]).

    **NOTE:** Disabling private rDNS resolution behaves effectively the same as if no private reverse DNS servers provided by user and by the OS.

### Fixed

- Statistics for 7 days displayed by day on the dashboard graph ([#6712]).

- Missing "served from cache" label on long DNS server strings ([#6740]).

- Incorrect tracking of the system hosts file’s changes ([#6711]).

[#5992]: https://github.com/AdguardTeam/AdGuardHome/issues/5992
[#6610]: https://github.com/AdguardTeam/AdGuardHome/issues/6610
[#6711]: https://github.com/AdguardTeam/AdGuardHome/issues/6711
[#6712]: https://github.com/AdguardTeam/AdGuardHome/issues/6712
[#6740]: https://github.com/AdguardTeam/AdGuardHome/issues/6740
[#6820]: https://github.com/AdguardTeam/AdGuardHome/issues/6820

[ms-v0.107.46]: https://github.com/AdguardTeam/AdGuardHome/milestone/81?closed=1

## [v0.107.45] - 2024-03-06

See also the [v0.107.45 GitHub milestone][ms-v0.107.45].

### Security

- Go version has been updated to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.21.8][go-1.21.8].

### Added

- Context menu item in the Query Log to add a Client to the Persistent client list ([#6679]).

### Changed

- Starting with this release our scripts are using Go’s [forward compatibility mechanism][go-toolchain] for updating the Go version.

    **Important note for porters:**  This change means that if your `go` version is 1.21+ but is different from the one required by AdGuard Home, the `go` tool will automatically download the required version.

    If you want to use the version installed on your builder, run:

    ```sh
    go get go@$YOUR_VERSION
    go mod tidy
    ```

    and call `make` with `GOTOOLCHAIN=local`.

### Deprecated

- Go 1.21 support.  Future versions will require at least Go 1.22 to build.

### Fixed

- Missing IP addresses in logs when querying for domain names from the ignore lists.

- Blank page after resetting access clients ([#6634]).

- Wrong algorithm for caching bootstrapped upstream addresses ([#6723]).

### Removed

- Go 1.20 support, as it has reached end of life.

[#6634]: https://github.com/AdguardTeam/AdGuardHome/issues/6634
[#6679]: https://github.com/AdguardTeam/AdGuardHome/issues/6679
[#6723]: https://github.com/AdguardTeam/AdGuardHome/issues/6723

[go-1.21.8]:    https://groups.google.com/g/golang-announce/c/5pwGVUPoMbg
[go-toolchain]: https://go.dev/blog/toolchain
[ms-v0.107.45]: https://github.com/AdguardTeam/AdGuardHome/milestone/80?closed=1

## [v0.107.44] - 2024-02-06

See also the [v0.107.44 GitHub milestone][ms-v0.107.44].

### Added

- Timezones in the Etc/ area to the timezone list ([#6568]).

- The schema version of the configuration file to the output of running `AdGuardHome` (or `AdGuardHome.exe`) with `-v --version` command-line options ([#6545]).

- Ability to disable plain-DNS serving via UI if an encrypted protocol is already used ([#1660]).

### Changed

- The bootstrapped upstream addresses are now updated according to the TTL of the bootstrap DNS response ([#6321]).

- Logging level of timeout errors is now `error` instead of `debug` ([#6574]).

- The field `"upstream_mode"` in `POST /control/dns_config` and `GET /control/dns_info` HTTP APIs now accepts `load_balance` value.  Check `openapi/CHANGELOG.md` for more details.

#### Configuration changes

In this release, the schema version has changed from 27 to 28.

- The new property `clients.persistent.*.uid`, which is a unique identifier of the persistent client.

- The properties `dns.all_servers` and `dns.fastest_addr` were removed, their values migrated to newly added field `dns.upstream_mode` that describes the logic through which upstreams will be used.  See also a [Wiki page][wiki-config].

    ```yaml
    # BEFORE:
    'dns':
        # …
        'all_servers': true
        'fastest_addr': true

    # AFTER:
    'dns':
        # …
        'upstream_mode': 'parallel'
    ```

    To rollback this change, remove the new field `upstream_mode`, set back `dns.all_servers` and `dns.fastest_addr` properties in `dns` section, and change the `schema_version` back to `27`.

### Fixed

- “Invalid AddrPort” in the *Private reverse DNS servers* section on the *Settings → DNS settings* page.

- Panic on using `--no-etc-hosts` flag ([#6644]).

- Schedule display in the client settings after creating or updating.

- Zero value in `querylog.size_memory` disables logging ([#6570]).

- Non-anonymized IP addresses on the dashboard ([#6584]).

- Maximum cache TTL requirement when editing minimum cache TTL in the Web UI ([#6409]).

- Load balancing algorithm stuck on a single server ([#6480]).

- Statistics for 7 days displayed as 168 hours on the dashboard.

- Pre-filling the Edit static lease window with data ([#6534]).

- Names defined in the `/etc/hosts` for a single address family wrongly considered undefined for another family ([#6541]).

- Omitted CNAME records in safe search results, which can cause YouTube to not work on iOS ([#6352]).

[#6321]: https://github.com/AdguardTeam/AdGuardHome/issues/6321
[#6352]: https://github.com/AdguardTeam/AdGuardHome/issues/6352
[#6409]: https://github.com/AdguardTeam/AdGuardHome/issues/6409
[#6480]: https://github.com/AdguardTeam/AdGuardHome/issues/6480
[#6534]: https://github.com/AdguardTeam/AdGuardHome/issues/6534
[#6541]: https://github.com/AdguardTeam/AdGuardHome/issues/6541
[#6545]: https://github.com/AdguardTeam/AdGuardHome/issues/6545
[#6568]: https://github.com/AdguardTeam/AdGuardHome/issues/6568
[#6570]: https://github.com/AdguardTeam/AdGuardHome/issues/6570
[#6574]: https://github.com/AdguardTeam/AdGuardHome/issues/6574
[#6584]: https://github.com/AdguardTeam/AdGuardHome/issues/6584
[#6644]: https://github.com/AdguardTeam/AdGuardHome/issues/6644

[ms-v0.107.44]: https://github.com/AdguardTeam/AdGuardHome/milestone/79?closed=1
[wiki-config]:  https://github.com/AdguardTeam/AdGuardHome/wiki/Configuration

## [v0.107.43] - 2023-12-11

See also the [v0.107.43 GitHub milestone][ms-v0.107.43].

### Fixed

- Incorrect handling of IPv4-in-IPv6 addresses when binding to an unspecified address on some machines ([#6510]).

[#6510]: https://github.com/AdguardTeam/AdGuardHome/issues/6510

[ms-v0.107.43]: https://github.com/AdguardTeam/AdGuardHome/milestone/78?closed=1

## [v0.107.42] - 2023-12-07

See also the [v0.107.42 GitHub milestone][ms-v0.107.42].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-39326, CVE-2023-45283, and CVE-2023-45285 Go vulnerabilities fixed in [Go 1.20.12][go-1.20.12].

### Added

- Ability to set client’s custom DNS cache ([#6263]).

- Ability to disable plain-DNS serving through configuration file if an encrypted protocol is already enabled ([#1660]).

- Ability to specify rate limiting settings in the Web UI ([#6369]).

### Changed

#### Configuration changes

- The new property `dns.serve_plain_dns` has been added to the configuration file ([#1660]).

- The property `dns.bogus_nxdomain` is now validated more strictly.

- Added new properties `clients.persistent.*.upstreams_cache_enabled` and `clients.persistent.*.upstreams_cache_size` that describe cache configuration for each client’s custom upstream configuration.

### Fixed

- `ipset` entries family validation ([#6420]).

- Pre-filling the *New static lease* window with data ([#6402]).

- Protection pause timer synchronization ([#5759]).

[#1660]: https://github.com/AdguardTeam/AdGuardHome/issues/1660
[#5759]: https://github.com/AdguardTeam/AdGuardHome/issues/5759
[#6263]: https://github.com/AdguardTeam/AdGuardHome/issues/6263
[#6369]: https://github.com/AdguardTeam/AdGuardHome/issues/6369
[#6402]: https://github.com/AdguardTeam/AdGuardHome/issues/6402
[#6420]: https://github.com/AdguardTeam/AdGuardHome/issues/6420

[go-1.20.12]:   https://groups.google.com/g/golang-announce/c/iLGK3x6yuNo/m/z6MJ-eB0AQAJ
[ms-v0.107.42]: https://github.com/AdguardTeam/AdGuardHome/milestone/77?closed=1

## [v0.107.41] - 2023-11-13

See also the [v0.107.41 GitHub milestone][ms-v0.107.41].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-45283 and CVE-2023-45284 Go vulnerabilities fixed in [Go 1.20.11][go-1.20.11].

### Added

- Ability to specify subnet lengths for IPv4 and IPv6 addresses, used for rate limiting requests, in the configuration file ([#6368]).

- Ability to specify multiple domain specific upstreams per line, e.g.  `[/domain1/../domain2/]upstream1 upstream2 .. upstreamN` ([#4977]).

### Changed

- Increased the height of the ready-to-use filter lists dialog ([#6358]).

- Improved logging of authentication failures ([#6357]).

#### Configuration changes

- New properties `dns.ratelimit_subnet_len_ipv4` and `dns.ratelimit_subnet_len_ipv6` have been added to the configuration file ([#6368]).

### Fixed

- Schedule timezone not being sent ([#6401]).

- Average request processing time calculation ([#6220]).

- Redundant truncation of long client names in the Top Clients table ([#6338]).

- Scrolling column headers in the tables ([#6337]).

- `$important,dnsrewrite` rules not overriding allowlist rules ([#6204]).

- Dark mode DNS rewrite background ([#6329]).

- Issues with QUIC and HTTP/3 upstreams on Linux ([#6335]).

[#4977]: https://github.com/AdguardTeam/AdGuardHome/issues/4977
[#6204]: https://github.com/AdguardTeam/AdGuardHome/issues/6204
[#6220]: https://github.com/AdguardTeam/AdGuardHome/issues/6220
[#6329]: https://github.com/AdguardTeam/AdGuardHome/issues/6329
[#6335]: https://github.com/AdguardTeam/AdGuardHome/issues/6335
[#6337]: https://github.com/AdguardTeam/AdGuardHome/issues/6337
[#6338]: https://github.com/AdguardTeam/AdGuardHome/issues/6338
[#6357]: https://github.com/AdguardTeam/AdGuardHome/issues/6357
[#6358]: https://github.com/AdguardTeam/AdGuardHome/issues/6358
[#6368]: https://github.com/AdguardTeam/AdGuardHome/issues/6368
[#6401]: https://github.com/AdguardTeam/AdGuardHome/issues/6401

[go-1.20.11]:   https://groups.google.com/g/golang-announce/c/4tU8LZfBFkY/m/d-jSKR_jBwAJ
[ms-v0.107.41]: https://github.com/AdguardTeam/AdGuardHome/milestone/76?closed=1

## [v0.107.40] - 2023-10-18

See also the [v0.107.40 GitHub milestone][ms-v0.107.40].

### Changed

- *Block* and *Unblock* buttons of the query log moved to the tooltip menu ([#684]).

### Fixed

- Dashboard tables scroll issue ([#6180]).

- The time shown in the statistics is one hour less than the current time ([#6296]).

- Issues with QUIC and HTTP/3 upstreams on FreeBSD ([#6301]).

- Panic on clearing the query log ([#6304]).

[#684]:  https://github.com/AdguardTeam/AdGuardHome/issues/684
[#6180]: https://github.com/AdguardTeam/AdGuardHome/issues/6180
[#6296]: https://github.com/AdguardTeam/AdGuardHome/issues/6296
[#6301]: https://github.com/AdguardTeam/AdGuardHome/issues/6301
[#6304]: https://github.com/AdguardTeam/AdGuardHome/issues/6304

[ms-v0.107.40]: https://github.com/AdguardTeam/AdGuardHome/milestone/75?closed=1

## [v0.107.39] - 2023-10-11

See also the [v0.107.39 GitHub milestone][ms-v0.107.39].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-39323 and CVE-2023-39325 Go vulnerabilities fixed in [Go 1.20.9][go-1.20.9] and [Go 1.20.10][go-1.20.10].

### Added

- Ability to edit static leases on *DHCP settings* page ([#1700]).

- Ability to specify for how long clients should cache a filtered response, using the *Blocked response TTL* field on the *DNS settings* page ([#4569]).

### Changed

- `ipset` entries are updated more frequently ([#6233]).

- Node.JS 16 is now required to build the frontend.

### Fixed

- Incorrect domain-specific upstream matching for `DS` queries ([#6156]).

- Improper validation of password length ([#6280]).

- Wrong algorithm for filtering self addresses from the list of private upstream DNS servers ([#6231]).

- An accidental change in DNS rewrite priority ([#6226]).

[#1700]: https://github.com/AdguardTeam/AdGuardHome/issues/1700
[#4569]: https://github.com/AdguardTeam/AdGuardHome/issues/4569
[#6156]: https://github.com/AdguardTeam/AdGuardHome/issues/6156
[#6226]: https://github.com/AdguardTeam/AdGuardHome/issues/6226
[#6231]: https://github.com/AdguardTeam/AdGuardHome/issues/6231
[#6233]: https://github.com/AdguardTeam/AdGuardHome/issues/6233
[#6280]: https://github.com/AdguardTeam/AdGuardHome/issues/6280

[go-1.20.10]:   https://groups.google.com/g/golang-announce/c/iNNxDTCjZvo/m/UDd7VKQuAAAJ
[go-1.20.9]:    https://groups.google.com/g/golang-announce/c/XBa1oHDevAo/m/desYyx3qAgAJ
[ms-v0.107.39]: https://github.com/AdguardTeam/AdGuardHome/milestone/74?closed=1

## [v0.107.38] - 2023-09-11

See also the [v0.107.38 GitHub milestone][ms-v0.107.38].

### Fixed

- Incorrect original answer when a response is filtered ([#6183]).

- Comments in the *Fallback DNS servers* field in the UI ([#6182]).

- Empty or default Safe Browsing and Parental Control settings ([#6181]).

- Various UI issues.

[#6181]: https://github.com/AdguardTeam/AdGuardHome/issues/6181
[#6182]: https://github.com/AdguardTeam/AdGuardHome/issues/6182
[#6183]: https://github.com/AdguardTeam/AdGuardHome/issues/6183

[ms-v0.107.38]: https://github.com/AdguardTeam/AdGuardHome/milestone/73?closed=1

## [v0.107.37] - 2023-09-07

See also the [v0.107.37 GitHub milestone][ms-v0.107.37].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-39318, CVE-2023-39319, and CVE-2023-39320 Go vulnerabilities fixed in [Go 1.20.8][go-1.20.8].

### Added

- AdBlock-style syntax support for ignored domains in logs and statistics ([#5720]).

- [`Strict-Transport-Security`][hsts] header in the HTTP API and DNS-over-HTTPS responses when HTTPS is forced ([#2998]).  See [RFC 6797][rfc6797].

- UI for the schedule of the service-blocking pause ([#951]).

- IPv6 hints are now filtered in case IPv6 addresses resolving is disabled ([#6122]).

- The ability to set fallback DNS servers in the configuration file and the UI ([#3701]).

- While adding or updating blocklists, the title can now be parsed from `! Title:` definition of the blocklist’s source ([#6020]).

- The ability to filter DNS HTTPS records including IPv4 and IPv6 hints ([#6053]).

- Two new metrics showing total number of responses from each upstream DNS server and their average processing time in the Web UI ([#1453]).

- The ability to set the port for the `pprof` debug API, see configuration changes below.

### Changed

- `$dnsrewrite` rules containing IPv4-mapped IPv6 addresses are now working consistently with legacy DNS rewrites and match the `AAAA` requests.

- For non-A and non-AAAA requests, which has been filtered, the NODATA response is returned if the blocking mode isn’t set to `Null IP`.  In previous versions it returned NXDOMAIN response in such cases.

#### Configuration changes

In this release, the schema version has changed from 24 to 27.

- Ignore rules blocking `.` in `querylog.ignored` and `statistics.ignored` have been migrated to AdBlock syntax (`|.^`).  To rollback this change, restore the rules and change the `schema_version` back to `26`.

- Filtering-related settings have been moved from `dns` section of the YAML configuration file to the new section `filtering`:

    ```yaml
    # BEFORE:
    'dns':
      'filtering_enabled': true
      'filters_update_interval': 24
      'parental_enabled': false
      'safebrowsing_enabled': false
      'safebrowsing_cache_size': 1048576
      'safesearch_cache_size': 1048576
      'parental_cache_size': 1048576
      'safe_search':
        'enabled': false
        'bing': true
        'duckduckgo': true
        'google': true
        'pixabay': true
        'yandex': true
        'youtube': true
      'rewrites': []
      'blocked_services':
        'schedule':
          'time_zone': 'Local'
        'ids': []
      'protection_enabled':        true,
      'blocking_mode':             'custom_ip',
      'blocking_ipv4':             '1.2.3.4',
      'blocking_ipv6':             '1:2:3::4',
      'blocked_response_ttl':      10,
      'protection_disabled_until': 'null',
      'parental_block_host':       'p.dns.adguard.com',
      'safebrowsing_block_host':   's.dns.adguard.com'

    # AFTER:
    'filtering':
      'filtering_enabled': true
      'filters_update_interval': 24
      'parental_enabled': false
      'safebrowsing_enabled': false
      'safebrowsing_cache_size': 1048576
      'safesearch_cache_size': 1048576
      'parental_cache_size': 1048576
      'safe_search':
        'enabled': false
        'bing': true
        'duckduckgo': true
        'google': true
        'pixabay': true
        'yandex': true
        'youtube': true
      'rewrites': []
      'blocked_services':
        'schedule':
          'time_zone': 'Local'
        'ids': []
      'protection_enabled':        true,
      'blocking_mode':             'custom_ip',
      'blocking_ipv4':             '1.2.3.4',
      'blocking_ipv6':             '1:2:3::4',
      'blocked_response_ttl':      10,
      'protection_disabled_until': 'null',
      'parental_block_host':       'p.dns.adguard.com',
      'safebrowsing_block_host':   's.dns.adguard.com',
    ```

    To rollback this change, remove the new object `filtering`, set back filtering properties in `dns` section, and change the `schema_version` back to `25`.

- Property `debug_pprof` which used to setup profiling HTTP handler, is now moved to the new `pprof` object under `http` section.  The new object contains properties `enabled` and `port`:

    ```yaml
    # BEFORE:
    'debug_pprof': true

    # AFTER:
    'http':
      'pprof':
        'enabled': true
        'port': 6060
    ```

    Note that the new default `6060` is used as default.  To rollback this change, remove the new object `pprof`, set back `debug_pprof`, and change the `schema_version` back to `24`.

### Fixed

- Incorrect display date on statistics graph ([#5793]).

- Missing query log entries and statistics on service restart ([#6100]).

- Occasional DNS-over-QUIC and DNS-over-HTTP/3 errors ([#6133]).

- Legacy DNS rewrites containing IPv4-mapped IPv6 addresses are now matching the `AAAA` requests, not `A` ([#6050]).

- File log configuration, such as `max_size`, being ignored ([#6093]).

- Panic on using a single-slash filtering rule.

- Panic on shutting down while DNS requests are in process of filtering ([#5948]).

[#1453]: https://github.com/AdguardTeam/AdGuardHome/issues/1453
[#2998]: https://github.com/AdguardTeam/AdGuardHome/issues/2998
[#3701]: https://github.com/AdguardTeam/AdGuardHome/issues/3701
[#5720]: https://github.com/AdguardTeam/AdGuardHome/issues/5720
[#5793]: https://github.com/AdguardTeam/AdGuardHome/issues/5793
[#5948]: https://github.com/AdguardTeam/AdGuardHome/issues/5948
[#6020]: https://github.com/AdguardTeam/AdGuardHome/issues/6020
[#6050]: https://github.com/AdguardTeam/AdGuardHome/issues/6050
[#6053]: https://github.com/AdguardTeam/AdGuardHome/issues/6053
[#6093]: https://github.com/AdguardTeam/AdGuardHome/issues/6093
[#6100]: https://github.com/AdguardTeam/AdGuardHome/issues/6100
[#6122]: https://github.com/AdguardTeam/AdGuardHome/issues/6122
[#6133]: https://github.com/AdguardTeam/AdGuardHome/issues/6133

[go-1.20.8]:    https://groups.google.com/g/golang-announce/c/Fm51GRLNRvM/m/F5bwBlXMAQAJ
[hsts]:         https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Strict-Transport-Security
[ms-v0.107.37]: https://github.com/AdguardTeam/AdGuardHome/milestone/72?closed=1
[rfc6797]:      https://datatracker.ietf.org/doc/html/rfc6797

## [v0.107.36] - 2023-08-02

See also the [v0.107.36 GitHub milestone][ms-v0.107.36].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-29409 Go vulnerability fixed in [Go 1.20.7][go-1.20.7].

### Deprecated

- Go 1.20 support.  Future versions will require at least Go 1.21 to build.

### Fixed

- Inability to block queries for the root domain, such as `NS .` queries, using the *Disallowed domains* feature on the *DNS settings* page ([#6049]).  Users who want to block `.` queries should use the `|.^` AdBlock rule or a similar regular expression.

- Client hostnames not resolving when upstream server responds with zero-TTL records ([#6046]).

### Removed

- Go 1.19 support, as it has reached end of life.

[#6046]: https://github.com/AdguardTeam/AdGuardHome/issues/6046
[#6049]: https://github.com/AdguardTeam/AdGuardHome/issues/6049

[go-1.20.7]:    https://groups.google.com/g/golang-announce/c/X0b6CsSAaYI/m/Efv5DbZ9AwAJ
[ms-v0.107.36]: https://github.com/AdguardTeam/AdGuardHome/milestone/71?closed=1

## [v0.107.35] - 2023-07-26

See also the [v0.107.35 GitHub milestone][ms-v0.107.35].

### Changed

- Improved reliability filtering-rule list updates on Unix systems.

### Fixed

- Occasional client information lookup failures that could lead to the DNS server getting stuck ([#6006]).

- `bufio.Scanner: token too long` and other errors when trying to add filtering-rule lists with lines over 1024 bytes long or containing cosmetic rules ([#6003]).

### Removed

- Default exposure of the non-standard ports 784 and 8853 for DNS-over-QUIC in the `Dockerfile`.

[#6003]: https://github.com/AdguardTeam/AdGuardHome/issues/6003
[#6006]: https://github.com/AdguardTeam/AdGuardHome/issues/6006

[ms-v0.107.35]: https://github.com/AdguardTeam/AdGuardHome/milestone/70?closed=1

## [v0.107.34] - 2023-07-12

See also the [v0.107.34 GitHub milestone][ms-v0.107.34].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-29406 Go vulnerability fixed in [Go 1.19.11][go-1.19.11].

### Added

- Ability to ignore queries for the root domain, such as `NS .` queries ([#5990]).

### Changed

- Improved CPU and RAM consumption during updates of filtering-rule lists.

#### Configuration changes

In this release, the schema version has changed from 23 to 24.

- Properties starting with `log_`, and `verbose` property, which used to set up logging are now moved to the new object `log` containing new properties `file`, `max_backups`, `max_size`, `max_age`, `compress`, `local_time`, and `verbose`:

    ```yaml
    # BEFORE:
    'log_file': ""
    'log_max_backups': 0
    'log_max_size': 100
    'log_max_age': 3
    'log_compress': false
    'log_localtime': false
    'verbose': false

    # AFTER:
    'log':
        'file': ""
        'max_backups': 0
        'max_size': 100
        'max_age': 3
        'compress': false
        'local_time': false
        'verbose': false
    ```

    To rollback this change, remove the new object `log`, set back `log_` and `verbose` properties and change the `schema_version` back to `23`.

### Deprecated

- Default exposure of the non-standard ports 784 and 8853 for DNS-over-QUIC in the `Dockerfile`.

### Fixed

- Two unspecified IPs when a host is blocked in two filter lists ([#5972]).

- Incorrect setting of Parental Control cache size.

- Excessive RAM and CPU consumption by Safe Browsing and Parental Control filters ([#5896]).

### Removed

- The `HEALTHCHECK` section and the use of `tini` in the `ENTRYPOINT` section in `Dockerfile` ([#5939]).  They caused a lot of issues, especially with tools like `docker-compose` and `podman`.

    **NOTE:** Some Docker tools may cache `ENTRYPOINT` sections, so some users may be required to backup their configuration, stop the container, purge the old image, and reload it from scratch.

[#5896]: https://github.com/AdguardTeam/AdGuardHome/issues/5896
[#5972]: https://github.com/AdguardTeam/AdGuardHome/issues/5972
[#5990]: https://github.com/AdguardTeam/AdGuardHome/issues/5990

[go-1.19.11]:   https://groups.google.com/g/golang-announce/c/2q13H6LEEx0/m/sduSepLLBwAJ
[ms-v0.107.34]: https://github.com/AdguardTeam/AdGuardHome/milestone/69?closed=1

## [v0.107.33] - 2023-07-03

See also the [v0.107.33 GitHub milestone][ms-v0.107.33].

### Added

- The new command-line flag `--web-addr` is the address to serve the web UI on, in the host:port format.

- The ability to set inactivity periods for filtering blocked services, both globally and per client, in the configuration file ([#951]).  The UI changes are coming in the upcoming releases.

- The ability to edit rewrite rules via `PUT /control/rewrite/update` HTTP API and the Web UI ([#1577]).

### Changed

#### Configuration changes

In this release, the schema version has changed from 20 to 23.

- Properties `bind_host`, `bind_port`, and `web_session_ttl` which used to setup web UI binding configuration, are now moved to a new object `http` containing new properties `address` and `session_ttl`:

    ```yaml
    # BEFORE:
    'bind_host': '1.2.3.4'
    'bind_port': 8080
    'web_session_ttl': 720

    # AFTER:
    'http':
      'address': '1.2.3.4:8080'
      'session_ttl': '720h'
    ```

    Note that the new `http.session_ttl` property is now a duration string.  To rollback this change, remove the new object `http`, set back `bind_host`, `bind_port`, `web_session_ttl`,  and change the `schema_version` back to `22`.

- Property `clients.persistent.blocked_services`, which in schema versions 21 and earlier used to be a list containing ids of blocked services, is now an object containing ids and schedule for blocked services:

    ```yaml
    # BEFORE:
    'clients':
      'persistent':
        - 'name': 'client-name'
          'blocked_services':
          - id_1
          - id_2

    # AFTER:
    'clients':
      'persistent':
      - 'name': client-name
        'blocked_services':
          'ids':
          - id_1
          - id_2
        'schedule':
          'time_zone': 'Local'
          'sun':
            'start': '0s'
            'end': '24h'
          'mon':
            'start': '1h'
            'end': '23h'
    ```

    To rollback this change, replace `clients.persistent.blocked_services` object with the list of ids of blocked services and change the `schema_version` back to `21`.

- Property `dns.blocked_services`, which in schema versions 20 and earlier used to be a list containing ids of blocked services, is now an object containing ids and schedule for blocked services:

    ```yaml
    # BEFORE:
    'blocked_services':
    - id_1
    - id_2

    # AFTER:
    'blocked_services':
      'ids':
      - id_1
      - id_2
      'schedule':
        'time_zone': 'Local'
        'sun':
          'start': '0s'
          'end': '24h'
        'mon':
          'start': '10m'
          'end': '23h30m'
        'tue':
          'start': '20m'
          'end': '23h'
        'wed':
          'start': '30m'
          'end': '22h30m'
        'thu':
          'start': '40m'
          'end': '22h'
        'fri':
          'start': '50m'
          'end': '21h30m'
        'sat':
          'start': '1h'
          'end': '21h'
    ```

    To rollback this change, replace `dns.blocked_services` object with the list of ids of blocked services and change the `schema_version` back to `20`.

### Deprecated

- The `HEALTHCHECK` section and the use of `tini` in the `ENTRYPOINT` section in `Dockerfile` ([#5939]).  They cause a lot of issues, especially with tools like `docker-compose` and `podman`, and will be removed in a future release.

- Flags `-h`, `--host`, `-p`, `--port` have been deprecated.  The `-h` flag will work as an alias for `--help`, instead of the deprecated `--host` in the future releases.

### Fixed

- Ignoring of `/etc/hosts` file when resolving the hostnames of upstream DNS servers ([#5902]).

- Excessive error logging when using DNS-over-QUIC ([#5285]).

- Inability to set `bind_host` in `AdGuardHome.yaml` in Docker ([#4231], [#4235]).

- The blocklists can now be deleted properly ([#5700]).

- Queries with the question-section target `.`, for example `NS .`, are now counted in the statistics and correctly shown in the query log ([#5910]).

- Safe Search not working with `AAAA` queries for domains that don’t have `AAAA` records ([#5913]).

[#951]:  https://github.com/AdguardTeam/AdGuardHome/issues/951
[#1577]: https://github.com/AdguardTeam/AdGuardHome/issues/1577
[#4231]: https://github.com/AdguardTeam/AdGuardHome/issues/4231
[#4235]: https://github.com/AdguardTeam/AdGuardHome/pull/4235
[#5285]: https://github.com/AdguardTeam/AdGuardHome/issues/5285
[#5700]: https://github.com/AdguardTeam/AdGuardHome/issues/5700
[#5902]: https://github.com/AdguardTeam/AdGuardHome/issues/5902
[#5910]: https://github.com/AdguardTeam/AdGuardHome/issues/5910
[#5913]: https://github.com/AdguardTeam/AdGuardHome/issues/5913
[#5939]: https://github.com/AdguardTeam/AdGuardHome/discussions/5939

[ms-v0.107.33]: https://github.com/AdguardTeam/AdGuardHome/milestone/68?closed=1

## [v0.107.32] - 2023-06-13

### Fixed

- DNSCrypt upstream not resetting the client and resolver information on dialing errors ([#5872]).

## [v0.107.31] - 2023-06-08

See also the [v0.107.31 GitHub milestone][ms-v0.107.31].

### Fixed

- Startup errors on OpenWrt ([#5872]).

- Plain-UDP upstreams always falling back to TCP, causing outages and slowdowns ([#5873], [#5874]).

[#5872]: https://github.com/AdguardTeam/AdGuardHome/issues/5872
[#5873]: https://github.com/AdguardTeam/AdGuardHome/issues/5873
[#5874]: https://github.com/AdguardTeam/AdGuardHome/issues/5874

[ms-v0.107.31]: https://github.com/AdguardTeam/AdGuardHome/milestone/67?closed=1

## [v0.107.30] - 2023-06-07

See also the [v0.107.30 GitHub milestone][ms-v0.107.30].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-29402, CVE-2023-29403, and CVE-2023-29404 Go vulnerabilities fixed in [Go 1.19.10][go-1.19.10].

### Fixed

- Unquoted IPv6 bind hosts with trailing colons erroneously considered unspecified addresses are now properly validated ([#5752]).

    **NOTE:** the Docker healthcheck script now also doesn’t interpret the `""` value as unspecified address.

- Incorrect `Content-Type` header value in `POST /control/version.json` and `GET /control/dhcp/interfaces` HTTP APIs ([#5716]).

- Provided bootstrap servers are now used to resolve the hostnames of plain UDP/TCP upstream servers.

[#5716]: https://github.com/AdguardTeam/AdGuardHome/issues/5716

[go-1.19.10]:   https://groups.google.com/g/golang-announce/c/q5135a9d924/m/j0ZoAJOHAwAJ
[ms-v0.107.30]: https://github.com/AdguardTeam/AdGuardHome/milestone/66?closed=1

## [v0.107.29] - 2023-04-18

See also the [v0.107.29 GitHub milestone][ms-v0.107.29].

### Added

- The ability to exclude client activity from the query log or statistics by editing client’s settings on the respective page in the UI ([#1717], [#4299]).

### Changed

- Stored DHCP leases moved from `leases.db` to `data/leases.json`.  The file format has also been optimized.

### Fixed

- The `github.com/mdlayher/raw` dependency has been temporarily returned to support raw connections on Darwin ([#5712]).

- Incorrect recording of blocked results as “Blocked by CNAME or IP” in the query log ([#5725]).

- All Safe Search services being unchecked by default.

- Panic when a DNSCrypt stamp is invalid ([#5721]).

[#5712]: https://github.com/AdguardTeam/AdGuardHome/issues/5712
[#5721]: https://github.com/AdguardTeam/AdGuardHome/issues/5721
[#5725]: https://github.com/AdguardTeam/AdGuardHome/issues/5725
[#5752]: https://github.com/AdguardTeam/AdGuardHome/issues/5752

[ms-v0.107.29]: https://github.com/AdguardTeam/AdGuardHome/milestone/65?closed=1

## [v0.107.28] - 2023-04-12

See also the [v0.107.28 GitHub milestone][ms-v0.107.28].

### Added

- The ability to exclude client activity from the query log or statistics by using the new properties `ignore_querylog` and `ignore_statistics` of the items of the `clients.persistent` array ([#1717], [#4299]).  The UI changes are coming in the upcoming releases.

- Better profiling information when `debug_pprof` is set to `true`.

- IPv6 support in Safe Search for some services.

- The ability to make bootstrap DNS lookups prefer IPv6 addresses to IPv4 ones using the new `dns.bootstrap_prefer_ipv6` configuration file property ([#4262]).

- Docker container’s healthcheck ([#3290]).

- The new HTTP API `POST /control/protection`, that updates protection state and adds an optional pause duration ([#1333]).  The format of request body is described in `openapi/openapi.yaml`.  The duration of this pause could also be set with the property `protection_disabled_until` in the `dns` object of the YAML configuration file.

- The ability to create a static DHCP lease from a dynamic one more easily ([#3459]).

- Two new HTTP APIs, `PUT /control/stats/config/update` and `GET control/stats/config`, which can be used to set and receive the query log configuration.  See `openapi/openapi.yaml` for the full description.

- Two new HTTP APIs, `PUT /control/querylog/config/update` and `GET control/querylog/config`, which can be used to set and receive the statistics configuration.  See `openapi/openapi.yaml` for the full description.

- The ability to set custom IP for EDNS Client Subnet by using the DNS-server configuration section on the DNS settings page in the UI ([#1472]).

- The ability to manage Safe Search for each service by using the new `safe_search` property ([#1163]).

### Changed

- ARPA domain names containing a subnet within private networks now also considered private, behaving closer to [RFC 6761][rfc6761] ([#5567]).

#### Configuration changes

In this release, the schema version has changed from 17 to 20.

- Property `statistics.interval`, which in schema versions 19 and earlier used to be an integer number of days, is now a string with a human-readable duration:

    ```yaml
    # BEFORE:
    'statistics':
      # …
      'interval': 1

    # AFTER:
    'statistics':
      # …
      'interval': '24h'
    ```

  To rollback this change, convert the property back into days and change the `schema_version` back to `19`.

- The `dns.safesearch_enabled` property has been replaced with `safe_search` object containing per-service settings.

- The `clients.persistent.safesearch_enabled` property has been replaced with `safe_search` object containing per-service settings.

    ```yaml
      # BEFORE:
      'safesearch_enabled': true

      # AFTER:
      'safe_search':
        'enabled': true
        'bing': true
        'duckduckgo': true
        'google': true
        'pixabay': true
        'yandex': true
        'youtube': true
    ```

    To rollback this change, move the value of `dns.safe_search.enabled` into the `dns.safesearch_enabled`, then remove `dns.safe_search` property.  Do the same client’s specific `clients.persistent.safesearch` and then change the `schema_version` back to `17`.

### Deprecated

- The `POST /control/safesearch/enable` HTTP API is deprecated.  Use the new `PUT /control/safesearch/settings` API.

- The `POST /control/safesearch/disable` HTTP API is deprecated.  Use the new `PUT /control/safesearch/settings` API

- The `safesearch_enabled` property is deprecated in the following HTTP APIs:
    - `GET /control/clients`;
    - `POST /control/clients/add`;
    - `POST /control/clients/update`;
    - `GET /control/clients/find?ip0=...&ip1=...&ip2=...`.

    Check `openapi/openapi.yaml` for more details.

- The `GET /control/stats_info` HTTP API; use the new `GET /control/stats/config` API instead.

    **NOTE:** If interval is custom then it will be equal to `90` days for compatibility reasons.  See `openapi/openapi.yaml` and `openapi/CHANGELOG.md`.

- The `POST /control/stats_config` HTTP API; use the new `PUT /control/stats/config/update` API instead.

- The `GET /control/querylog_info` HTTP API; use the new `GET /control/querylog/config` API instead.

    **NOTE:** If interval is custom then it will be equal to `90` days for compatibility reasons.  See `openapi/openapi.yaml` and `openapi/CHANGELOG.md`.

- The `POST /control/querylog_config` HTTP API; use the new `PUT /control/querylog/config/update` API instead.

### Fixed

- Logging of the client’s IP address after failed login attempts ([#5701]).

[#1163]: https://github.com/AdguardTeam/AdGuardHome/issues/1163
[#1333]: https://github.com/AdguardTeam/AdGuardHome/issues/1333
[#1472]: https://github.com/AdguardTeam/AdGuardHome/issues/1472
[#3290]: https://github.com/AdguardTeam/AdGuardHome/issues/3290
[#3459]: https://github.com/AdguardTeam/AdGuardHome/issues/3459
[#4262]: https://github.com/AdguardTeam/AdGuardHome/issues/4262
[#5567]: https://github.com/AdguardTeam/AdGuardHome/issues/5567
[#5701]: https://github.com/AdguardTeam/AdGuardHome/issues/5701

[ms-v0.107.28]: https://github.com/AdguardTeam/AdGuardHome/milestone/64?closed=1
[rfc6761]:      https://datatracker.ietf.org/doc/html/rfc6761

## [v0.107.27] - 2023-04-05

See also the [v0.107.27 GitHub milestone][ms-v0.107.27].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-24534, CVE-2023-24536, CVE-2023-24537, and CVE-2023-24538 Go vulnerabilities fixed in [Go 1.19.8][go-1.19.8].

### Fixed

- Query log not showing all filtered queries when the “Filtered” log filter is selected ([#5639]).

- Panic in empty hostname in the filter’s URL ([#5631]).

- Panic caused by empty top-level domain name label in `/etc/hosts` files ([#5584]).

[#5584]: https://github.com/AdguardTeam/AdGuardHome/issues/5584
[#5631]: https://github.com/AdguardTeam/AdGuardHome/issues/5631
[#5639]: https://github.com/AdguardTeam/AdGuardHome/issues/5639

[go-1.19.8]:    https://groups.google.com/g/golang-announce/c/Xdv6JL9ENs8/m/OV40vnafAwAJ
[ms-v0.107.27]: https://github.com/AdguardTeam/AdGuardHome/milestone/63?closed=1

## [v0.107.26] - 2023-03-09

See also the [v0.107.26 GitHub milestone][ms-v0.107.26].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2023-24532 Go vulnerability fixed in [Go 1.19.7][go-1.19.7].

### Added

- The ability to set custom IP for EDNS Client Subnet by using the new `dns.edns_client_subnet.use_custom` and `dns.edns_client_subnet.custom_ip` properties ([#1472]).  The UI changes are coming in the upcoming releases.

- The ability to use `dnstype` rules in the disallowed domains list ([#5468]).  This allows dropping requests based on their question types.

### Changed

#### Configuration changes

- Property `edns_client_subnet`, which in schema versions 16 and earlier used to be a part of the `dns` object, is now part of the `dns.edns_client_subnet` object:

    ```yaml
    # BEFORE:
    'dns':
      # …
      'edns_client_subnet': false

    # AFTER:
    'dns':
      # …
      'edns_client_subnet':
        'enabled': false
        'use_custom': false
        'custom_ip': ''
    ```

    To rollback this change, move the value of `dns.edns_client_subnet.enabled` into the `dns.edns_client_subnet`, remove the properties `dns.edns_client_subnet.enabled`, `dns.edns_client_subnet.use_custom`, `dns.edns_client_subnet.custom_ip`, and change the `schema_version` back to `16`.

### Fixed

- Obsolete value of the Interface MTU DHCP option is now omitted ([#5281]).

- Various dark theme bugs ([#5439], [#5441], [#5442], [#5515]).

- Automatic update on MIPS64 and little-endian 32-bit MIPS architectures ([#5270], [#5373]).

- Requirements to domain names in domain-specific upstream configurations have been relaxed to meet those from [RFC 3696][rfc3696] ([#4884]).

- Failing service installation via script on FreeBSD ([#5431]).

[#4884]: https://github.com/AdguardTeam/AdGuardHome/issues/4884
[#5270]: https://github.com/AdguardTeam/AdGuardHome/issues/5270
[#5281]: https://github.com/AdguardTeam/AdGuardHome/issues/5281
[#5373]: https://github.com/AdguardTeam/AdGuardHome/issues/5373
[#5431]: https://github.com/AdguardTeam/AdGuardHome/issues/5431
[#5439]: https://github.com/AdguardTeam/AdGuardHome/issues/5439
[#5441]: https://github.com/AdguardTeam/AdGuardHome/issues/5441
[#5442]: https://github.com/AdguardTeam/AdGuardHome/issues/5442
[#5468]: https://github.com/AdguardTeam/AdGuardHome/issues/5468
[#5515]: https://github.com/AdguardTeam/AdGuardHome/issues/5515

[go-1.19.7]:    https://groups.google.com/g/golang-announce/c/3-TpUx48iQY
[ms-v0.107.26]: https://github.com/AdguardTeam/AdGuardHome/milestone/62?closed=1
[rfc3696]:      https://datatracker.ietf.org/doc/html/rfc3696

## [v0.107.25] - 2023-02-21

See also the [v0.107.25 GitHub milestone][ms-v0.107.25].

### Fixed

- Panic when using unencrypted DNS-over-HTTPS ([#5518]).

[#5518]: https://github.com/AdguardTeam/AdGuardHome/issues/5518

[ms-v0.107.25]: https://github.com/AdguardTeam/AdGuardHome/milestone/61?closed=1

## [v0.107.24] - 2023-02-15

See also the [v0.107.24 GitHub milestone][ms-v0.107.24].

### Security

- Go version has been updated, both because Go 1.18 has reached end of life an to prevent the possibility of exploiting the Go vulnerabilities fixed in [Go 1.19.6][go-1.19.6].

### Added

- The ability to disable statistics by using the new `statistics.enabled` property.  Previously it was necessary to set the `statistics_interval` to 0, losing the previous value ([#1717], [#4299]).

- The ability to exclude domain names from the query log or statistics by using the new `querylog.ignored` or `statistics.ignored` properties ([#1717], [#4299]).  The UI changes are coming in the upcoming releases.

### Changed

#### Configuration changes

In this release, the schema version has changed from 14 to 16.

- Property `statistics_interval`, which in schema versions 15 and earlier used to be a part of the `dns` object, is now a part of the `statistics` object:

    ```yaml
    # BEFORE:
    'dns':
      # …
      'statistics_interval': 1

    # AFTER:
    'statistics':
      # …
      'interval': 1
    ```

    To rollback this change, move the property back into the `dns` object and change the `schema_version` back to `15`.

- The properties `dns.querylog_enabled`, `dns.querylog_file_enabled`, `dns.querylog_interval`, and `dns.querylog_size_memory` have been moved to the new `querylog` object.

    ```yaml
    # BEFORE:
    'dns':
      'querylog_enabled': true
      'querylog_file_enabled': true
      'querylog_interval': '2160h'
      'querylog_size_memory': 1000

    # AFTER:
    'querylog':
      'enabled': true
      'file_enabled': true
      'interval': '2160h'
      'size_memory': 1000
      'ignored': []
    ```

    To rollback this change, rename and move properties back into the `dns` object, remove `querylog` object and `querylog.ignored` property, and change the `schema_version` back to `14`.

### Deprecated

- Go 1.19 support.  Future versions will require at least Go 1.20 to build.

### Fixed

- Setting the AD (Authenticated Data) flag on responses that have the DO (DNSSEC OK) flag set but not the AD flag ([#5479]).

- Client names resolved via reverse DNS not being updated ([#4939]).

- The icon for League Of Legends on the Blocked services page ([#5433]).

### Removed

- Go 1.18 support, as it has reached end of life.

[#1717]: https://github.com/AdguardTeam/AdGuardHome/issues/1717
[#4299]: https://github.com/AdguardTeam/AdGuardHome/issues/4299
[#4939]: https://github.com/AdguardTeam/AdGuardHome/issues/4939
[#5433]: https://github.com/AdguardTeam/AdGuardHome/issues/5433
[#5479]: https://github.com/AdguardTeam/AdGuardHome/issues/5479

[go-1.19.6]:    https://groups.google.com/g/golang-announce/c/V0aBFqaFs_E
[ms-v0.107.24]: https://github.com/AdguardTeam/AdGuardHome/milestone/60?closed=1

## [v0.107.23] - 2023-02-01

See also the [v0.107.23 GitHub milestone][ms-v0.107.23].

### Added

- DNS64 support ([#5117]).  The function may be enabled with new `use_dns64` property under `dns` object in the configuration along with `dns64_prefixes`, the set of exclusion prefixes to filter AAAA responses.  The Well-Known Prefix (`64:ff9b::/96`) is used if no custom prefixes are specified.

### Fixed

- Filtering rules with `*` as the hostname not working properly ([#5245]).

- Various dark theme bugs ([#5375]).

### Removed

- The “beta frontend” and the corresponding APIs.  They never quite worked properly, and the future new version of AdGuard Home API will probably be different.

    Correspondingly, the configuration parameter `beta_bind_port` has been removed as well.

[#5117]: https://github.com/AdguardTeam/AdGuardHome/issues/5117
[#5245]: https://github.com/AdguardTeam/AdGuardHome/issues/5245
[#5375]: https://github.com/AdguardTeam/AdGuardHome/issues/5375

[ms-v0.107.23]: https://github.com/AdguardTeam/AdGuardHome/milestone/59?closed=1

## [v0.107.22] - 2023-01-19

See also the [v0.107.22 GitHub milestone][ms-v0.107.22].

### Added

- Experimental Dark UI theme ([#613]).

- The new HTTP API `PUT /control/profile/update`, that updates current user language and UI theme.  The format of request body is described in `openapi/openapi.yaml`.

### Changed

- The HTTP API `GET /control/profile` now returns enhanced object with current user’s name, language, and UI theme.  The format of response body is described in `openapi/openapi.yaml` and `openapi/CHANGELOG.md`.

### Fixed

- `AdGuardHome --update` freezing when another instance of AdGuard Home is running ([#4223], [#5191]).

- The `--update` flag performing an update even when there is no version change.

- Failing HTTPS redirection on saving the encryption settings ([#4898]).

- Zeroing rules counter of erroneously edited filtering rule lists ([#5290]).

- Filters updating strategy, which could sometimes lead to use of broken or incompletely downloaded lists ([#5258]).

[#613]:  https://github.com/AdguardTeam/AdGuardHome/issues/613
[#5191]: https://github.com/AdguardTeam/AdGuardHome/issues/5191
[#5290]: https://github.com/AdguardTeam/AdGuardHome/issues/5290
[#5258]: https://github.com/AdguardTeam/AdGuardHome/issues/5258

[ms-v0.107.22]: https://github.com/AdguardTeam/AdGuardHome/milestone/58?closed=1

## [v0.107.21] - 2022-12-15

See also the [v0.107.21 GitHub milestone][ms-v0.107.21].

### Changed

- The URLs of the default filters for new installations are synchronized to those introduced in v0.107.20 ([#5238]).

    **NOTE:** Some users may need to re-add the lists from the vetted filter lists to update the URLs to the new ones.  Custom filters added by users themselves do not require re-adding.

### Fixed

- Errors popping up during updates of settings, which could sometimes cause the server to stop responding ([#5251]).

[#5238]: https://github.com/AdguardTeam/AdGuardHome/issues/5238
[#5251]: https://github.com/AdguardTeam/AdGuardHome/issues/5251

[ms-v0.107.21]: https://github.com/AdguardTeam/AdGuardHome/milestone/57?closed=1

## [v0.107.20] - 2022-12-07

See also the [v0.107.20 GitHub milestone][ms-v0.107.20].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-41717 and CVE-2022-41720 Go vulnerabilities fixed in [Go 1.18.9][go-1.18.9].

### Added

- The ability to clear the DNS cache ([#5190]).

### Changed

- DHCP server initialization errors are now logged at debug level if the server itself disabled ([#4944]).

### Fixed

- Wrong validation error messages on the DHCP configuration page ([#5208]).

- Slow upstream checks making the API unresponsive ([#5193]).

- The TLS initialization errors preventing AdGuard Home from starting ([#5189]).  Instead, AdGuard Home disables encryption and shows an error message on the encryption settings page in the UI, which was the intended previous behavior.

- URLs of some vetted blocklists.

[#4944]: https://github.com/AdguardTeam/AdGuardHome/issues/4944
[#5189]: https://github.com/AdguardTeam/AdGuardHome/issues/5189
[#5190]: https://github.com/AdguardTeam/AdGuardHome/issues/5190
[#5193]: https://github.com/AdguardTeam/AdGuardHome/issues/5193
[#5208]: https://github.com/AdguardTeam/AdGuardHome/issues/5208

[go-1.18.9]:    https://groups.google.com/g/golang-announce/c/L_3rmdT0BMU
[ms-v0.107.20]: https://github.com/AdguardTeam/AdGuardHome/milestone/56?closed=1

## [v0.107.19] - 2022-11-23

See also the [v0.107.19 GitHub milestone][ms-v0.107.19].

### Added

- The ability to block popular Mastodon instances ([AdguardTeam/HostlistsRegistry#100]).

- The new `--update` command-line option, which allows updating AdGuard Home silently ([#4223]).

### Changed

- Minor UI changes.

[#4223]: https://github.com/AdguardTeam/AdGuardHome/issues/4223

[ms-v0.107.19]: https://github.com/AdguardTeam/AdGuardHome/milestone/55?closed=1

[AdguardTeam/HostlistsRegistry#100]: https://github.com/AdguardTeam/HostlistsRegistry/pull/100

## [v0.107.18] - 2022-11-08

See also the [v0.107.18 GitHub milestone][ms-v0.107.18].

### Fixed

- Crash on some systems when domains from system hosts files are processed ([#5089]).

[#5089]: https://github.com/AdguardTeam/AdGuardHome/issues/5089

[ms-v0.107.18]: https://github.com/AdguardTeam/AdGuardHome/milestone/54?closed=1

## [v0.107.17] - 2022-11-02

See also the [v0.107.17 GitHub milestone][ms-v0.107.17].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-41716 Go vulnerability fixed in [Go 1.18.8][go-1.18.8].

### Added

- The warning message when adding a certificate having no IP addresses ([#4898]).

- Several new blockable services ([#3972]).  Those will now be more in sync with the services that are already blockable in AdGuard DNS.

- A new HTTP API, `GET /control/blocked_services/all`, that lists all available blocked services and their data, such as SVG icons ([#3972]).

- The new optional `tls.override_tls_ciphers` property, which allows overriding TLS ciphers used by AdGuard Home ([#4925], [#4990]).

- The ability to serve DNS on link-local IPv6 addresses ([#2926]).

- The ability to put [ClientIDs][clientid] into DNS-over-HTTPS hostnames as opposed to URL paths ([#3418]).  Note that AdGuard Home checks the server name only if the URL does not contain a ClientID.

### Changed

- DNS-over-TLS resolvers aren’t returned anymore when the configured TLS certificate contains no IP addresses ([#4927]).

- Responses with `SERVFAIL` code are now cached for at least 30 seconds.

### Deprecated

- The `GET /control/blocked_services/services` HTTP API; use the new `GET /control/blocked_services/all` API instead ([#3972]).

### Fixed

- ClientIDs not working when using DNS-over-HTTPS with HTTP/3.

- Editing the URL of an enabled rule list also includes validation of the filter contents preventing from saving a bad one ([#4916]).

- The default value of `dns.cache_size` accidentally set to 0 has now been reverted to 4 MiB ([#5010]).

- Responses for which the DNSSEC validation had explicitly been omitted aren’t cached now ([#4942]).

- Web UI not switching to HTTP/3 ([#4986], [#4993]).

[#2926]: https://github.com/AdguardTeam/AdGuardHome/issues/2926
[#3418]: https://github.com/AdguardTeam/AdGuardHome/issues/3418
[#3972]: https://github.com/AdguardTeam/AdGuardHome/issues/3972
[#4898]: https://github.com/AdguardTeam/AdGuardHome/issues/4898
[#4916]: https://github.com/AdguardTeam/AdGuardHome/issues/4916
[#4925]: https://github.com/AdguardTeam/AdGuardHome/issues/4925
[#4942]: https://github.com/AdguardTeam/AdGuardHome/issues/4942
[#4986]: https://github.com/AdguardTeam/AdGuardHome/issues/4986
[#4990]: https://github.com/AdguardTeam/AdGuardHome/issues/4990
[#4993]: https://github.com/AdguardTeam/AdGuardHome/issues/4993
[#5010]: https://github.com/AdguardTeam/AdGuardHome/issues/5010

[clientid]:     https://github.com/AdguardTeam/AdGuardHome/wiki/Clients#clientid
[go-1.18.8]:    https://groups.google.com/g/golang-announce/c/mbHY1UY3BaM
[ms-v0.107.17]: https://github.com/AdguardTeam/AdGuardHome/milestone/53?closed=1

## [v0.107.16] - 2022-10-07

This is a security update.  There is no GitHub milestone, since no GitHub issues were resolved.

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-2879, CVE-2022-2880, and CVE-2022-41715 Go vulnerabilities fixed in [Go 1.18.7][go-1.18.7].

[go-1.18.7]: https://groups.google.com/g/golang-announce/c/xtuG5faxtaU

## [v0.107.15] - 2022-10-03

See also the [v0.107.15 GitHub milestone][ms-v0.107.15].

### Security

- As an additional CSRF protection measure, AdGuard Home now ensures that requests that change its state but have no body (such as `POST /control/stats_reset` requests) do not have a `Content-Type` header set on them ([#4970]).

### Added

#### Experimental HTTP/3 Support

See [#3955] and the related issues for more details.  These features are still experimental and may break or change in the future.

- DNS-over-HTTP/3 DNS and web UI client request support.  This feature must be explicitly enabled by setting the new property `dns.serve_http3` in the configuration file to `true`.

- DNS-over-HTTP upstreams can now upgrade to HTTP/3 if the new configuration file property `dns.use_http3_upstreams` is set to `true`.

- Upstreams with forced DNS-over-HTTP/3 and no fallback to prior HTTP versions using the `h3://` scheme.

### Fixed

- User-specific blocked services not applying correctly ([#4945], [#4982], [#4983]).
- `only application/json is allowed` errors in various APIs ([#4970]).

[#3955]: https://github.com/AdguardTeam/AdGuardHome/issues/3955
[#4945]: https://github.com/AdguardTeam/AdGuardHome/issues/4945
[#4970]: https://github.com/AdguardTeam/AdGuardHome/issues/4970
[#4982]: https://github.com/AdguardTeam/AdGuardHome/issues/4982
[#4983]: https://github.com/AdguardTeam/AdGuardHome/issues/4983

[ms-v0.107.15]: https://github.com/AdguardTeam/AdGuardHome/milestone/51?closed=1

## [v0.107.14] - 2022-09-29

See also the [v0.107.14 GitHub milestone][ms-v0.107.14].

### Security

A Cross-Site Request Forgery (CSRF) vulnerability has been discovered.  We thank Daniel Elkabes from Mend.io for reporting this vulnerability to us.  This is [CVE-2022-32175].

#### `SameSite` Policy

The `SameSite` policy on the AdGuard Home session cookies is now set to `Lax`.  Which means that the only cross-site HTTP request for which the browser is allowed to send the session cookie is navigating to the AdGuard Home domain.

**Users are strongly advised to log out, clear browser cache, and log in again after updating.**

#### Removal Of Plain-Text APIs (BREAKING API CHANGE)

We have implemented several measures to prevent such vulnerabilities in the future, but some of these measures break backwards compatibility for the sake of better protection.

The following APIs, which previously accepted or returned `text/plain` data, now accept or return data as JSON.  All new formats for the request and response bodies are documented in `openapi/openapi.yaml` and `openapi/CHANGELOG.md`.

- `GET  /control/i18n/current_language`;
- `POST /control/dhcp/find_active_dhcp`;
- `POST /control/filtering/set_rules`;
- `POST /control/i18n/change_language`.

#### Stricter Content-Type Checks (BREAKING API CHANGE)

All JSON APIs that expect a body now check if the request actually has `Content-Type` set to `application/json`.

#### Other Security Changes

- Weaker cipher suites that use the CBC (cipher block chaining) mode of operation have been disabled ([#2993]).

### Added

- Support for plain (unencrypted) HTTP/2 ([#4930]).  This is useful for AdGuard Home installations behind a reverse proxy.

### Fixed

- Incorrect path template in DDR responses ([#4927]).

[#2993]: https://github.com/AdguardTeam/AdGuardHome/issues/2993
[#4927]: https://github.com/AdguardTeam/AdGuardHome/issues/4927
[#4930]: https://github.com/AdguardTeam/AdGuardHome/issues/4930

[CVE-2022-32175]: https://www.cvedetails.com/cve/CVE-2022-32175
[ms-v0.107.14]:   https://github.com/AdguardTeam/AdGuardHome/milestone/50?closed=1

## [v0.107.13] - 2022-09-14

See also the [v0.107.13 GitHub milestone][ms-v0.107.13].

### Added

- The new optional `dns.ipset_file` property, which can be set in the configuration file.  It allows loading the `ipset` list from a file, just like `dns.upstream_dns_file` does for upstream servers ([#4686]).

### Changed

- The minimum DHCP message size is reassigned back to BOOTP’s constraint of 300 bytes ([#4904]).

### Fixed

- Panic when adding a static lease within the disabled DHCP server ([#4722]).

[#4686]: https://github.com/AdguardTeam/AdGuardHome/issues/4686
[#4722]: https://github.com/AdguardTeam/AdGuardHome/issues/4722
[#4904]: https://github.com/AdguardTeam/AdGuardHome/issues/4904

[ms-v0.107.13]: https://github.com/AdguardTeam/AdGuardHome/milestone/49?closed=1

## [v0.107.12] - 2022-09-07

See also the [v0.107.12 GitHub milestone][ms-v0.107.12].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-27664 and CVE-2022-32190 Go vulnerabilities fixed in [Go 1.18.6][go-1.18.6].

### Added

- New `bool`, `dur`, `u8`, and `u16` DHCP options to provide more convenience on options control by setting values in a human-readable format ([#4705]).  See also a [Wiki page][wiki-dhcp-opts].

- New `del` DHCP option which removes the corresponding option from server’s response ([#4337]).  See also a [Wiki page][wiki-dhcp-opts].

    **NOTE:** This modifier affects all the parameters in the response and not only the requested ones.

- A new HTTP API, `GET /control/blocked_services/services`, that lists all available blocked services ([#4535]).

### Changed

- The DHCP options handling is now closer to the [RFC 2131][rfc-2131] ([#4705]).

- When the DHCP server is enabled, queries for domain names under `dhcp.local_domain_name` not pointing to real DHCP client hostnames are now processed by filters ([#4865]).

- The `DHCPREQUEST` handling is now closer to the [RFC 2131][rfc-2131] ([#4863]).

- The internal DNS client, used to resolve hostnames of external clients and also during automatic updates, now respects the upstream mode settings for the main DNS client ([#4403]).

### Deprecated

- Ports 784 and 8853 for DNS-over-QUIC in Docker images.  Users who still serve DoQ on these ports are encouraged to move to the standard port 853.  These ports will be removed from the `EXPOSE` section of our `Dockerfile` in a future release.

- Go 1.18 support.  Future versions will require at least Go 1.19 to build.

### Fixed

- The length of the DHCP server’s response is now at least 576 bytes as per [RFC 2131][rfc-2131] recommendation ([#4337]).

- Dynamic leases created with empty hostnames ([#4745]).

- Unnecessary logging of non-critical statistics errors ([#4850]).

[#4337]: https://github.com/AdguardTeam/AdGuardHome/issues/4337
[#4403]: https://github.com/AdguardTeam/AdGuardHome/issues/4403
[#4535]: https://github.com/AdguardTeam/AdGuardHome/issues/4535
[#4705]: https://github.com/AdguardTeam/AdGuardHome/issues/4705
[#4745]: https://github.com/AdguardTeam/AdGuardHome/issues/4745
[#4850]: https://github.com/AdguardTeam/AdGuardHome/issues/4850
[#4863]: https://github.com/AdguardTeam/AdGuardHome/issues/4863
[#4865]: https://github.com/AdguardTeam/AdGuardHome/issues/4865

[go-1.18.6]:      https://groups.google.com/g/golang-announce/c/x49AQzIVX-s
[ms-v0.107.12]:   https://github.com/AdguardTeam/AdGuardHome/milestone/48?closed=1
[rfc-2131]:       https://datatracker.ietf.org/doc/html/rfc2131
[wiki-dhcp-opts]: https://github.com/adguardTeam/adGuardHome/wiki/DHCP#config-4

## [v0.107.11] - 2022-08-19

See also the [v0.107.11 GitHub milestone][ms-v0.107.11].

### Added

- Bilibili service blocking ([#4795]).

### Changed

- DNS-over-QUIC connections now use keepalive.

### Fixed

- Migrations from releases older than v0.107.7 failing ([#4846]).

[#4795]: https://github.com/AdguardTeam/AdGuardHome/issues/4795
[#4846]: https://github.com/AdguardTeam/AdGuardHome/issues/4846

[ms-v0.107.11]: https://github.com/AdguardTeam/AdGuardHome/milestone/47?closed=1

## [v0.107.10] - 2022-08-17

See also the [v0.107.10 GitHub milestone][ms-v0.107.10].

### Added

- Arabic localization.

- Support for Discovery of Designated Resolvers (DDR) according to the [RFC draft][ddr-draft] ([#4463]).

### Changed

- Our snap package now uses the `core22` image as its base ([#4843]).

### Fixed

- DHCP not working on most OSes ([#4836]).

- `invalid argument` errors during update checks on older Linux kernels ([#4670]).

- Data races and concurrent map access in statistics module ([#4358], [#4342]).

[#4342]: https://github.com/AdguardTeam/AdGuardHome/issues/4342
[#4358]: https://github.com/AdguardTeam/AdGuardHome/issues/4358
[#4670]: https://github.com/AdguardTeam/AdGuardHome/issues/4670
[#4843]: https://github.com/AdguardTeam/AdGuardHome/issues/4843

[ddr-draft]:    https://datatracker.ietf.org/doc/html/draft-ietf-add-ddr-08
[ms-v0.107.10]: https://github.com/AdguardTeam/AdGuardHome/milestone/46?closed=1

## [v0.107.9] - 2022-08-03

See also the [v0.107.9 GitHub milestone][ms-v0.107.9].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-32189 Go vulnerability fixed in [Go 1.18.5][go-1.18.5].  Go 1.17 support has also been removed, as it has reached end of life and will not receive security updates.

### Added

- Domain-specific upstream servers test.  If such test fails, a warning message is shown ([#4517]).

- `windows/arm64` support ([#3057]).

### Changed

- UI and update links have been changed to make them more resistant to DNS blocking.

### Fixed

- DHCP not working on most OSes ([#4836]).

- Several UI issues ([#4775], [#4776], [#4782]).

### Removed

- Go 1.17 support, as it has reached end of life.

[#3057]: https://github.com/AdguardTeam/AdGuardHome/issues/3057
[#4517]: https://github.com/AdguardTeam/AdGuardHome/issues/4517
[#4775]: https://github.com/AdguardTeam/AdGuardHome/issues/4775
[#4776]: https://github.com/AdguardTeam/AdGuardHome/issues/4776
[#4782]: https://github.com/AdguardTeam/AdGuardHome/issues/4782
[#4836]: https://github.com/AdguardTeam/AdGuardHome/issues/4836

[go-1.18.5]:   https://groups.google.com/g/golang-announce/c/YqYYG87xB10
[ms-v0.107.9]: https://github.com/AdguardTeam/AdGuardHome/milestone/45?closed=1

## [v0.107.8] - 2022-07-13

See also the [v0.107.8 GitHub milestone][ms-v0.107.8].

### Security

- Go version has been updated to prevent the possibility of exploiting the CVE-2022-1705, CVE-2022-32148, CVE-2022-30631, and other Go vulnerabilities fixed in [Go 1.17.12][go-1.17.12].

### Fixed

- DHCP lease validation incorrectly letting users assign the IP address of the gateway as the address of the lease ([#4698]).

- Updater no longer expects a hardcoded name for  `AdGuardHome` executable ([#4219]).

- Inconsistent names of runtime clients from hosts files ([#4683]).

- PTR requests for addresses leased by DHCP will now be resolved into hostnames under `dhcp.local_domain_name` ([#4699]).

- Broken service installation on OpenWrt ([#4677]).

[#4219]: https://github.com/AdguardTeam/AdGuardHome/issues/4219
[#4677]: https://github.com/AdguardTeam/AdGuardHome/issues/4677
[#4683]: https://github.com/AdguardTeam/AdGuardHome/issues/4683
[#4698]: https://github.com/AdguardTeam/AdGuardHome/issues/4698
[#4699]: https://github.com/AdguardTeam/AdGuardHome/issues/4699

[go-1.17.12]:  https://groups.google.com/g/golang-announce/c/nqrv9fbR0zE
[ms-v0.107.8]: https://github.com/AdguardTeam/AdGuardHome/milestone/44?closed=1

## [v0.107.7] - 2022-06-06

See also the [v0.107.7 GitHub milestone][ms-v0.107.7].

### Security

- Go version has been updated to prevent the possibility of exploiting the [CVE-2022-29526], [CVE-2022-30634], [CVE-2022-30629], [CVE-2022-30580], and [CVE-2022-29804] Go vulnerabilities.

- Enforced password strength policy ([#3503]).

### Added

- Support for the final DNS-over-QUIC standard, [RFC 9250][rfc-9250] ([#4592]).

- Support upstreams for subdomains of a domain only ([#4503]).

- The ability to control each source of runtime clients separately via `clients.runtime_sources` configuration object ([#3020]).

- The ability to customize the set of networks that are considered private through the new `dns.private_networks` property in the configuration file ([#3142]).

- EDNS Client-Subnet information in the request details section of a query log record ([#3978]).

- Support for hostnames for plain UDP upstream servers using the `udp://` scheme ([#4166]).

- Logs are now collected by default on FreeBSD and OpenBSD when AdGuard Home is installed as a service ([#4213]).

### Changed

- On OpenBSD, the daemon script now uses the recommended `/bin/ksh` shell instead of the `/bin/sh` one ([#4533]).  To apply this change, backup your data and run `AdGuardHome -s uninstall && AdGuardHome -s install`.

- The default DNS-over-QUIC port number is now `853` instead of `754` in accordance with [RFC 9250][rfc-9250] ([#4276]).

- Reverse DNS now has a greater priority as the source of runtime clients’ information than ARP neighborhood.

- Improved detection of runtime clients through more resilient ARP processing ([#3597]).

- The TTL of responses served from the optimistic cache is now lowered to 10 seconds.

- Domain-specific private reverse DNS upstream servers are now validated to allow only `*.in-addr.arpa` and `*.ip6.arpa` domains pointing to locally-served networks ([#3381]).

    **NOTE:**  If you already have invalid entries in your configuration, consider removing them manually, since they essentially had no effect.

- Response filtering is now performed using the record types of the answer section of messages as opposed to the type of the question ([#4238]).

- Instead of adding the build time information, the build scripts now use the standardized environment variable [`SOURCE_DATE_EPOCH`][repr] to add the date of the commit from which the binary was built ([#4221]).  This should simplify reproducible builds for package maintainers and those who compile their own AdGuard Home.

- The property `local_domain_name` is now in the `dhcp` object in the configuration file to avoid confusion ([#3367]).

- The `dns.bogus_nxdomain` property in the configuration file now supports CIDR notation alongside IP addresses ([#1730]).

#### Configuration changes

In this release, the schema version has changed from 12 to 14.

- Object `clients`, which in schema versions 13 and earlier was an array of actual persistent clients, is now consist of `persistent` and `runtime_sources` properties:

    ```yaml
    # BEFORE:
    'clients':
    - name: client-name
      # …

    # AFTER:
    'clients':
      'persistent':
        - name: client-name
          # …
      'runtime_sources':
        whois: true
        arp: true
        rdns: true
        dhcp: true
        hosts: true
    ```

    The value for `clients.runtime_sources.rdns` property is taken from `dns.resolve_clients` property.  To rollback this change, remove the `runtime_sources` property, move the contents of `persistent` into the `clients` itself, the value of `clients.runtime_sources.rdns` into the `dns.resolve_clients`, and change the `schema_version` back to `13`.

- Property `local_domain_name`, which in schema versions 12 and earlier used to be a part of the `dns` object, is now a part of the `dhcp` object:

    ```yaml
    # BEFORE:
    'dns':
      # …
      'local_domain_name': 'lan'

    # AFTER:
    'dhcp':
      # …
      'local_domain_name': 'lan'
    ```

    To rollback this change, move the property back into the `dns` object and change the `schema_version` back to `12`.

### Deprecated

- The `--no-etc-hosts` option.  Its functionality is now controlled by `clients.runtime_sources.hosts` configuration property.  v0.109.0 will remove the flag completely.

### Fixed

- Query log occasionally going into an infinite loop ([#4591]).

- Service startup on boot on systems using SysV-init ([#4480]).

- Detection of the stopped service status on macOS and Linux ([#4273]).

- Case-sensitive ClientID ([#4542]).

- Slow version update queries making other HTTP APIs unresponsive ([#4499]).

- ARP tables refreshing process causing excessive PTR requests ([#3157]).

[#1730]: https://github.com/AdguardTeam/AdGuardHome/issues/1730
[#3020]: https://github.com/AdguardTeam/AdGuardHome/issues/3020
[#3142]: https://github.com/AdguardTeam/AdGuardHome/issues/3142
[#3157]: https://github.com/AdguardTeam/AdGuardHome/issues/3157
[#3367]: https://github.com/AdguardTeam/AdGuardHome/issues/3367
[#3381]: https://github.com/AdguardTeam/AdGuardHome/issues/3381
[#3503]: https://github.com/AdguardTeam/AdGuardHome/issues/3503
[#3597]: https://github.com/AdguardTeam/AdGuardHome/issues/3597
[#3978]: https://github.com/AdguardTeam/AdGuardHome/issues/3978
[#4166]: https://github.com/AdguardTeam/AdGuardHome/issues/4166
[#4213]: https://github.com/AdguardTeam/AdGuardHome/issues/4213
[#4221]: https://github.com/AdguardTeam/AdGuardHome/issues/4221
[#4238]: https://github.com/AdguardTeam/AdGuardHome/issues/4238
[#4273]: https://github.com/AdguardTeam/AdGuardHome/issues/4273
[#4276]: https://github.com/AdguardTeam/AdGuardHome/issues/4276
[#4480]: https://github.com/AdguardTeam/AdGuardHome/issues/4480
[#4499]: https://github.com/AdguardTeam/AdGuardHome/issues/4499
[#4503]: https://github.com/AdguardTeam/AdGuardHome/issues/4503
[#4533]: https://github.com/AdguardTeam/AdGuardHome/issues/4533
[#4542]: https://github.com/AdguardTeam/AdGuardHome/issues/4542
[#4591]: https://github.com/AdguardTeam/AdGuardHome/issues/4591
[#4592]: https://github.com/AdguardTeam/AdGuardHome/issues/4592

[CVE-2022-29526]: https://www.cvedetails.com/cve/CVE-2022-29526
[CVE-2022-29804]: https://www.cvedetails.com/cve/CVE-2022-29804
[CVE-2022-30580]: https://www.cvedetails.com/cve/CVE-2022-30580
[CVE-2022-30629]: https://www.cvedetails.com/cve/CVE-2022-30629
[CVE-2022-30634]: https://www.cvedetails.com/cve/CVE-2022-30634
[ms-v0.107.7]:    https://github.com/AdguardTeam/AdGuardHome/milestone/43?closed=1
[rfc-9250]:       https://datatracker.ietf.org/doc/html/rfc9250

## [v0.107.6] - 2022-04-13

See also the [v0.107.6 GitHub milestone][ms-v0.107.6].

### Security

- `User-Agent` HTTP header removed from outgoing DNS-over-HTTPS requests.

- Go version has been updated to prevent the possibility of exploiting the [CVE-2022-24675], [CVE-2022-27536], and [CVE-2022-28327] Go vulnerabilities.

### Added

- Support for SVCB/HTTPS parameter `dohpath` in filtering rules with the `dnsrewrite` modifier according to the [RFC draft][dns-draft-02] ([#4463]).

### Changed

- Filtering rules with the `dnsrewrite` modifier that create SVCB or HTTPS responses should use `ech` instead of `echconfig` to conform with the [latest drafts][svcb-draft-08].

### Deprecated

- SVCB/HTTPS parameter name `echconfig` in filtering rules with the `dnsrewrite` modifier.  Use `ech` instead.  v0.109.0 will remove support for the outdated name `echconfig`.

- Obsolete `--no-mem-optimization` option ([#4437]).  v0.109.0 will remove the flag completely.

### Fixed

- I/O timeout errors when checking for the presence of another DHCP server.

- Network interfaces being incorrectly labeled as down during installation.

- Rules for blocking the QQ service ([#3717]).

### Removed

- Go 1.16 support, since that branch of the Go compiler has reached end of life and doesn’t receive security updates anymore.

[#3717]: https://github.com/AdguardTeam/AdGuardHome/issues/3717
[#4437]: https://github.com/AdguardTeam/AdGuardHome/issues/4437
[#4463]: https://github.com/AdguardTeam/AdGuardHome/issues/4463

[CVE-2022-24675]: https://www.cvedetails.com/cve/CVE-2022-24675
[CVE-2022-27536]: https://www.cvedetails.com/cve/CVE-2022-27536
[CVE-2022-28327]: https://www.cvedetails.com/cve/CVE-2022-28327
[dns-draft-02]:   https://datatracker.ietf.org/doc/html/draft-ietf-add-svcb-dns-02#section-5.1
[ms-v0.107.6]:    https://github.com/AdguardTeam/AdGuardHome/milestone/42?closed=1
[repr]:           https://reproducible-builds.org/docs/source-date-epoch/
[svcb-draft-08]:  https://www.ietf.org/archive/id/draft-ietf-dnsop-svcb-https-08.html

## [v0.107.5] - 2022-03-04

This is a security update.  There is no GitHub milestone, since no GitHub issues were resolved.

### Security

- Go version has been updated to prevent the possibility of exploiting the [CVE-2022-24921] Go vulnerability.

[CVE-2022-24921]: https://www.cvedetails.com/cve/CVE-2022-24921

## [v0.107.4] - 2022-03-01

See also the [v0.107.4 GitHub milestone][ms-v0.107.4].

### Security

- Go version has been updated to prevent the possibility of exploiting the [CVE-2022-23806], [CVE-2022-23772], and [CVE-2022-23773] Go vulnerabilities.

### Fixed

- Optimistic cache now responds with expired items even if those can’t be resolved again ([#4254]).

- Unnecessarily complex hosts-related logic leading to infinite recursion in some cases ([#4216]).

[#4216]: https://github.com/AdguardTeam/AdGuardHome/issues/4216
[#4254]: https://github.com/AdguardTeam/AdGuardHome/issues/4254

[CVE-2022-23772]: https://www.cvedetails.com/cve/CVE-2022-23772
[CVE-2022-23773]: https://www.cvedetails.com/cve/CVE-2022-23773
[CVE-2022-23806]: https://www.cvedetails.com/cve/CVE-2022-23806
[ms-v0.107.4]:    https://github.com/AdguardTeam/AdGuardHome/milestone/41?closed=1

## [v0.107.3] - 2022-01-25

See also the [v0.107.3 GitHub milestone][ms-v0.107.3].

### Added

- Support for a `dnsrewrite` modifier with an empty `NOERROR` response ([#4133]).

### Fixed

- Wrong set of ports checked for duplicates during the initial setup ([#4095]).

- Incorrectly invalidated service domains ([#4120]).

- Poor testing of domain-specific upstream servers ([#4074]).

- Omitted aliases of hosts specified by another line within the OS’s hosts file ([#4079]).

[#4074]: https://github.com/AdguardTeam/AdGuardHome/issues/4074
[#4079]: https://github.com/AdguardTeam/AdGuardHome/issues/4079
[#4095]: https://github.com/AdguardTeam/AdGuardHome/issues/4095
[#4120]: https://github.com/AdguardTeam/AdGuardHome/issues/4120
[#4133]: https://github.com/AdguardTeam/AdGuardHome/issues/4133

[ms-v0.107.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/40?closed=1

## [v0.107.2] - 2021-12-29

See also the [v0.107.2 GitHub milestone][ms-v0.107.2].

### Fixed

- Infinite loops when TCP connections time out ([#4042]).

[#4042]: https://github.com/AdguardTeam/AdGuardHome/issues/4042

[ms-v0.107.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/38?closed=1

## [v0.107.1] - 2021-12-29

See also the [v0.107.1 GitHub milestone][ms-v0.107.1].

### Changed

- The validation error message for duplicated allow- and blocklists in DNS settings now shows the duplicated elements ([#3975]).

### Fixed

- `ipset` initialization bugs ([#4027]).

- Legacy DNS rewrites from a wildcard pattern to a subdomain ([#4016]).

- Service not being stopped before running the `uninstall` service action ([#3868]).

- Broken `reload` service action on FreeBSD.

- Legacy DNS rewrites responding from upstream when a request other than `A` or `AAAA` is received ([#4008]).

- Panic on port availability check during installation ([#3987]).

- Incorrect application of rules from the OS’s hosts files ([#3998]).

[#3868]: https://github.com/AdguardTeam/AdGuardHome/issues/3868
[#3975]: https://github.com/AdguardTeam/AdGuardHome/issues/3975
[#3987]: https://github.com/AdguardTeam/AdGuardHome/issues/3987
[#3998]: https://github.com/AdguardTeam/AdGuardHome/issues/3998
[#4008]: https://github.com/AdguardTeam/AdGuardHome/issues/4008
[#4016]: https://github.com/AdguardTeam/AdGuardHome/issues/4016
[#4027]: https://github.com/AdguardTeam/AdGuardHome/issues/4027

[ms-v0.107.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/37?closed=1

## [v0.107.0] - 2021-12-21

See also the [v0.107.0 GitHub milestone][ms-v0.107.0].

### Added

- Upstream server information for responses from cache ([#3772]).  Note that old log entries concerning cached responses won’t include that information.

- Finnish and Ukrainian localizations.

- Setting the timeout for IP address pinging in the "Fastest IP address" mode through the new `fastest_timeout` property in the configuration file ([#1992]).

- Static IP address detection on FreeBSD ([#3289]).

- Optimistic cache ([#2145]).

- New possible value of `6h` for `querylog_interval` property ([#2504]).

- Blocking access using ClientIDs ([#2624], [#3162]).

- `source` directives support in `/etc/network/interfaces` on Linux ([#3257]).

- [RFC 9000][rfc-9000] support in QUIC.

- Completely disabling statistics by setting the statistics interval to zero ([#2141]).

- The ability to completely purge DHCP leases ([#1691]).

- Settable timeouts for querying the upstream servers ([#2280]).

- Configuration file properties to change group and user ID on startup on Unix ([#2763]).

- Experimental OpenBSD support for AMD64 and 64-bit ARM CPUs ([#2439], [#3225], [#3226]).

- Support for custom port in DNS-over-HTTPS profiles for Apple’s devices ([#3172]).

- `darwin/arm64` support ([#2443]).

- `freebsd/arm64` support ([#2441]).

- Output of the default addresses of the upstreams used for resolving PTRs for private addresses ([#3136]).

- Detection and handling of recurrent PTR requests for locally-served addresses ([#3185]).

- The ability to completely disable reverse DNS resolving of IPs from locally-served networks ([#3184]).

- New flag `--local-frontend` to serve dynamically changeable frontend files from disk as opposed to the ones that were compiled into the binary.

### Changed

- Port bindings are now checked for uniqueness ([#3835]).

- The DNSSEC check now simply checks against the AD flag in the response ([#3904]).

- Client objects in the configuration file are now sorted ([#3933]).

- Responses from cache are now labeled ([#3772]).

- Better error message for ED25519 private keys, which are not widely supported ([#3737]).

- Cache now follows RFC more closely for negative answers ([#3707]).

- `dnsrewrite` rules and other DNS rewrites will now be applied even when the protection is disabled ([#1558]).

- DHCP gateway address, subnet mask, IP address range, and leases validations ([#3529]).

- The `systemd` service script will now create the `/var/log` directory when it doesn’t exist ([#3579]).

- Items in allowed clients, disallowed clients, and blocked hosts lists are now required to be unique ([#3419]).

- The TLS private key previously saved as a string isn’t shown in API responses anymore ([#1898]).

- Better OpenWrt detection ([#3435]).

- DNS-over-HTTPS queries that come from HTTP proxies in the `trusted_proxies` list now use the real IP address of the client instead of the address of the proxy ([#2799]).

- Clients who are blocked by access settings now receive a `REFUSED` response when a protocol other than DNS-over-UDP and DNSCrypt is used.

- `dns.querylog_interval` property is now formatted in hours.

- Query log search now supports internationalized domains ([#3012]).

- Internationalized domains are now shown decoded in the query log with the original encoded version shown in request details ([#3013]).

- When `/etc/hosts`-type rules have several IPs for one host, all IPs are now returned instead of only the first one ([#1381]).

- Property `rlimit_nofile` is now in the `os` object of the configuration file, together with the new `group` and `user` properties ([#2763]).

- Permissions on filter files are now `0o644` instead of `0o600` ([#3198]).

#### Configuration changes

In this release, the schema version has changed from 10 to 12.

- Property `dns.querylog_interval`, which in schema versions 11 and earlier used to be an integer number of days, is now a string with a human-readable duration:

    ```yaml
    # BEFORE:
    'dns':
      # …
      'querylog_interval': 90

    # AFTER:
    'dns':
      # …
      'querylog_interval': '2160h'
    ```

    To rollback this change, convert the property back into days and change the `schema_version` back to `11`.

- Property `rlimit_nofile`, which in schema versions 10 and earlier used to be on the top level, is now moved to the new `os` object:

    ```yaml
    # BEFORE:
    'rlimit_nofile': 42

    # AFTER:
    'os':
      'group': ''
      'rlimit_nofile': 42
      'user': ''
    ```

    To rollback this change, move the property on the top level and change the `schema_version` back to `10`.

### Deprecated

- Go 1.16 support.  v0.108.0 will require at least Go 1.17 to build.

### Fixed

- EDNS0 TCP keepalive option handling ([#3778]).

- Rules with the `denyallow` modifier applying to IP addresses when they shouldn’t ([#3175]).

- The length of the EDNS0 client subnet option appearing too long for some upstream servers ([#3887]).

- Invalid redirection to the HTTPS web interface after saving enabled encryption settings ([#3558]).

- Incomplete propagation of the client’s IP anonymization setting to the statistics ([#3890]).

- Incorrect results with the `dnsrewrite` modifier for entries from the operating system’s hosts file ([#3815]).

- Matching against rules with `|` at the end of the domain name ([#3371]).

- Incorrect assignment of explicitly configured DHCP options ([#3744]).

- Occasional panic during shutdown ([#3655]).

- Addition of IPs into only one as opposed to all matching ipsets on Linux ([#3638]).

- Removal of temporary filter files ([#3567]).

- Panic when an upstream server responds with an empty question section ([#3551]).

- 9GAG blocking ([#3564]).

- DHCP now follows RFCs more closely when it comes to response sending and option selection ([#3443], [#3538]).

- Occasional panics when reading old statistics databases ([#3506]).

- `reload` service action on macOS and FreeBSD ([#3457]).

- Inaccurate using of service actions in the installation script ([#3450]).

- ClientID checking ([#3437]).

- Discovering other DHCP servers on `darwin` and `freebsd` ([#3417]).

- Switching listening address to unspecified one when bound to a single specified IPv4 address on Darwin (macOS) ([#2807]).

- Incomplete HTTP response for static IP address.

- DNSCrypt queries weren’t appearing in query log ([#3372]).

- Wrong IP address for proxied DNS-over-HTTPS queries ([#2799]).

- Domain name letter case mismatches in DNS rewrites ([#3351]).

- Conflicts between IPv4 and IPv6 DNS rewrites ([#3343]).

- Letter case mismatches in `CNAME` filtering ([#3335]).

- Occasional breakages on network errors with DNS-over-HTTP upstreams ([#3217]).

- Errors when setting static IP on Linux ([#3257]).

- Treatment of domain names and FQDNs in custom rules with the `dnsrewrite` modifier that use the `PTR` type ([#3256]).

- Redundant hostname generating while loading static leases with empty hostname ([#3166]).

- Domain name case in responses ([#3194]).

- Custom upstreams selection for clients with ClientIDs in DNS-over-TLS and DNS-over-HTTP ([#3186]).

- Incorrect client-based filtering applying logic ([#2875]).

### Removed

- Go 1.15 support.

[#1381]: https://github.com/AdguardTeam/AdGuardHome/issues/1381
[#1558]: https://github.com/AdguardTeam/AdGuardHome/issues/1558
[#1691]: https://github.com/AdguardTeam/AdGuardHome/issues/1691
[#1898]: https://github.com/AdguardTeam/AdGuardHome/issues/1898
[#1992]: https://github.com/AdguardTeam/AdGuardHome/issues/1992
[#2141]: https://github.com/AdguardTeam/AdGuardHome/issues/2141
[#2145]: https://github.com/AdguardTeam/AdGuardHome/issues/2145
[#2280]: https://github.com/AdguardTeam/AdGuardHome/issues/2280
[#2439]: https://github.com/AdguardTeam/AdGuardHome/issues/2439
[#2441]: https://github.com/AdguardTeam/AdGuardHome/issues/2441
[#2443]: https://github.com/AdguardTeam/AdGuardHome/issues/2443
[#2504]: https://github.com/AdguardTeam/AdGuardHome/issues/2504
[#2624]: https://github.com/AdguardTeam/AdGuardHome/issues/2624
[#2763]: https://github.com/AdguardTeam/AdGuardHome/issues/2763
[#2799]: https://github.com/AdguardTeam/AdGuardHome/issues/2799
[#2807]: https://github.com/AdguardTeam/AdGuardHome/issues/2807
[#3012]: https://github.com/AdguardTeam/AdGuardHome/issues/3012
[#3013]: https://github.com/AdguardTeam/AdGuardHome/issues/3013
[#3136]: https://github.com/AdguardTeam/AdGuardHome/issues/3136
[#3162]: https://github.com/AdguardTeam/AdGuardHome/issues/3162
[#3166]: https://github.com/AdguardTeam/AdGuardHome/issues/3166
[#3172]: https://github.com/AdguardTeam/AdGuardHome/issues/3172
[#3175]: https://github.com/AdguardTeam/AdGuardHome/issues/3175
[#3184]: https://github.com/AdguardTeam/AdGuardHome/issues/3184
[#3185]: https://github.com/AdguardTeam/AdGuardHome/issues/3185
[#3186]: https://github.com/AdguardTeam/AdGuardHome/issues/3186
[#3194]: https://github.com/AdguardTeam/AdGuardHome/issues/3194
[#3198]: https://github.com/AdguardTeam/AdGuardHome/issues/3198
[#3217]: https://github.com/AdguardTeam/AdGuardHome/issues/3217
[#3225]: https://github.com/AdguardTeam/AdGuardHome/issues/3225
[#3226]: https://github.com/AdguardTeam/AdGuardHome/issues/3226
[#3256]: https://github.com/AdguardTeam/AdGuardHome/issues/3256
[#3257]: https://github.com/AdguardTeam/AdGuardHome/issues/3257
[#3289]: https://github.com/AdguardTeam/AdGuardHome/issues/3289
[#3335]: https://github.com/AdguardTeam/AdGuardHome/issues/3335
[#3343]: https://github.com/AdguardTeam/AdGuardHome/issues/3343
[#3351]: https://github.com/AdguardTeam/AdGuardHome/issues/3351
[#3371]: https://github.com/AdguardTeam/AdGuardHome/issues/3371
[#3372]: https://github.com/AdguardTeam/AdGuardHome/issues/3372
[#3417]: https://github.com/AdguardTeam/AdGuardHome/issues/3417
[#3419]: https://github.com/AdguardTeam/AdGuardHome/issues/3419
[#3435]: https://github.com/AdguardTeam/AdGuardHome/issues/3435
[#3437]: https://github.com/AdguardTeam/AdGuardHome/issues/3437
[#3443]: https://github.com/AdguardTeam/AdGuardHome/issues/3443
[#3450]: https://github.com/AdguardTeam/AdGuardHome/issues/3450
[#3457]: https://github.com/AdguardTeam/AdGuardHome/issues/3457
[#3506]: https://github.com/AdguardTeam/AdGuardHome/issues/3506
[#3529]: https://github.com/AdguardTeam/AdGuardHome/issues/3529
[#3538]: https://github.com/AdguardTeam/AdGuardHome/issues/3538
[#3551]: https://github.com/AdguardTeam/AdGuardHome/issues/3551
[#3558]: https://github.com/AdguardTeam/AdGuardHome/issues/3558
[#3564]: https://github.com/AdguardTeam/AdGuardHome/issues/3564
[#3567]: https://github.com/AdguardTeam/AdGuardHome/issues/3567
[#3579]: https://github.com/AdguardTeam/AdGuardHome/issues/3579
[#3638]: https://github.com/AdguardTeam/AdGuardHome/issues/3638
[#3655]: https://github.com/AdguardTeam/AdGuardHome/issues/3655
[#3707]: https://github.com/AdguardTeam/AdGuardHome/issues/3707
[#3737]: https://github.com/AdguardTeam/AdGuardHome/issues/3737
[#3744]: https://github.com/AdguardTeam/AdGuardHome/issues/3744
[#3772]: https://github.com/AdguardTeam/AdGuardHome/issues/3772
[#3778]: https://github.com/AdguardTeam/AdGuardHome/issues/3778
[#3815]: https://github.com/AdguardTeam/AdGuardHome/issues/3815
[#3835]: https://github.com/AdguardTeam/AdGuardHome/issues/3835
[#3887]: https://github.com/AdguardTeam/AdGuardHome/issues/3887
[#3890]: https://github.com/AdguardTeam/AdGuardHome/issues/3890
[#3904]: https://github.com/AdguardTeam/AdGuardHome/issues/3904
[#3933]: https://github.com/AdguardTeam/AdGuardHome/pull/3933

[ms-v0.107.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/23?closed=1
[rfc-9000]:    https://datatracker.ietf.org/doc/html/rfc9000

## [v0.106.3] - 2021-05-19

See also the [v0.106.3 GitHub milestone][ms-v0.106.3].

### Added

- Support for reinstall (`-r`) and uninstall (`-u`) flags in the installation script ([#2462]).

- Support for DHCP `DECLINE` and `RELEASE` message types ([#3053]).

### Changed

- Add microseconds to log output.

### Fixed

- Intermittent "Warning: ID mismatch" errors ([#3087]).

- Error when using installation script on some ARMv7 devices ([#2542]).

- DHCP leases validation ([#3107], [#3127]).

- Local PTR request recursion in Docker containers ([#3064]).

- Ignoring client-specific filtering settings when filtering is disabled in general settings ([#2875]).

- Disallowed domains are now case-insensitive ([#3115]).

[#2462]: https://github.com/AdguardTeam/AdGuardHome/issues/2462
[#2542]: https://github.com/AdguardTeam/AdGuardHome/issues/2542
[#2875]: https://github.com/AdguardTeam/AdGuardHome/issues/2875
[#3053]: https://github.com/AdguardTeam/AdGuardHome/issues/3053
[#3064]: https://github.com/AdguardTeam/AdGuardHome/issues/3064
[#3107]: https://github.com/AdguardTeam/AdGuardHome/issues/3107
[#3115]: https://github.com/AdguardTeam/AdGuardHome/issues/3115
[#3127]: https://github.com/AdguardTeam/AdGuardHome/issues/3127

[ms-v0.106.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/35?closed=1

## [v0.106.2] - 2021-05-06

See also the [v0.106.2 GitHub milestone][ms-v0.106.2].

### Fixed

- Uniqueness validation for dynamic DHCP leases ([#3056]).

[#3056]: https://github.com/AdguardTeam/AdGuardHome/issues/3056

[ms-v0.106.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/34?closed=1

## [v0.106.1] - 2021-04-30

See also the [v0.106.1 GitHub milestone][ms-v0.106.1].

### Fixed

- Local domain name handling when the DHCP server is disabled ([#3028]).

- Normalization of previously-saved invalid static DHCP leases ([#3027]).

- Validation of IPv6 addresses with zones in system resolvers ([#3022]).

[#3022]: https://github.com/AdguardTeam/AdGuardHome/issues/3022
[#3027]: https://github.com/AdguardTeam/AdGuardHome/issues/3027
[#3028]: https://github.com/AdguardTeam/AdGuardHome/issues/3028

[ms-v0.106.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/33?closed=1

## [v0.106.0] - 2021-04-28

See also the [v0.106.0 GitHub milestone][ms-v0.106.0].

### Added

- The ability to block user for login after configurable number of unsuccessful attempts for configurable time ([#2826]).

- `denyallow` modifier for filters ([#2923]).

- Hostname uniqueness validation in the DHCP server ([#2952]).

- Hostname generating for DHCP clients which don’t provide their own ([#2723]).

- New flag `--no-etc-hosts` to disable client domain name lookups in the operating system’s `/etc/hosts` files ([#1947]).

- The ability to set up custom upstreams to resolve PTR queries for local addresses and to disable the automatic resolving of clients’ addresses ([#2704]).

- Logging of the client’s IP address after failed login attempts ([#2824]).

- Search by clients’ names in the query log ([#1273]).

- Verbose version output with `-v --version` ([#2416]).

- The ability to set a custom TLD or domain name for known hosts in the local network ([#2393], [#2961]).

- The ability to serve DNS queries on multiple hosts and interfaces ([#1401]).

- `ips` and `text` DHCP server options ([#2385]).

- `SRV` records support in filtering rules with the `dnsrewrite` modifier ([#2533]).

### Changed

- Our DoQ implementation is now updated to conform to the latest standard [draft][doq-draft-02] ([#2843]).

- Quality of logging ([#2954]).

- Normalization of hostnames sent by DHCP clients ([#2946], [#2952]).

- The access to the private hosts is now forbidden for users from external networks ([#2889]).

- The reverse lookup for local addresses is now performed via local resolvers ([#2704]).

- Stricter validation of the IP addresses of static leases in the DHCP server with regards to the netmask ([#2838]).

- Stricter validation of `dnsrewrite` filtering rule modifier parameters ([#2498]).

- New, more correct versioning scheme ([#2412]).

### Deprecated

- Go 1.15 support.  v0.107.0 will require at least Go 1.16 to build.

### Fixed

- Multiple answers for a `dnsrewrite` rule matching requests with repeating patterns in it ([#2981]).

- Root server resolving when custom upstreams for hosts are specified ([#2994]).

- Inconsistent resolving of DHCP clients when the DHCP server is disabled ([#2934]).

- Comment handling in clients’ custom upstreams ([#2947]).

- Overwriting of DHCPv4 options when using the HTTP API ([#2927]).

- Assumption that MAC addresses always have the length of 6 octets ([#2828]).

- Support for more than one `/24` subnet in DHCP ([#2541]).

- Invalid filenames in the `mobileconfig` API responses ([#2835]).

### Removed

- Go 1.14 support.

[#1273]: https://github.com/AdguardTeam/AdGuardHome/issues/1273
[#1401]: https://github.com/AdguardTeam/AdGuardHome/issues/1401
[#1947]: https://github.com/AdguardTeam/AdGuardHome/issues/1947
[#2385]: https://github.com/AdguardTeam/AdGuardHome/issues/2385
[#2393]: https://github.com/AdguardTeam/AdGuardHome/issues/2393
[#2412]: https://github.com/AdguardTeam/AdGuardHome/issues/2412
[#2416]: https://github.com/AdguardTeam/AdGuardHome/issues/2416
[#2498]: https://github.com/AdguardTeam/AdGuardHome/issues/2498
[#2533]: https://github.com/AdguardTeam/AdGuardHome/issues/2533
[#2541]: https://github.com/AdguardTeam/AdGuardHome/issues/2541
[#2704]: https://github.com/AdguardTeam/AdGuardHome/issues/2704
[#2723]: https://github.com/AdguardTeam/AdGuardHome/issues/2723
[#2824]: https://github.com/AdguardTeam/AdGuardHome/issues/2824
[#2826]: https://github.com/AdguardTeam/AdGuardHome/issues/2826
[#2828]: https://github.com/AdguardTeam/AdGuardHome/issues/2828
[#2835]: https://github.com/AdguardTeam/AdGuardHome/issues/2835
[#2838]: https://github.com/AdguardTeam/AdGuardHome/issues/2838
[#2843]: https://github.com/AdguardTeam/AdGuardHome/issues/2843
[#2889]: https://github.com/AdguardTeam/AdGuardHome/issues/2889
[#2923]: https://github.com/AdguardTeam/AdGuardHome/issues/2923
[#2927]: https://github.com/AdguardTeam/AdGuardHome/issues/2927
[#2934]: https://github.com/AdguardTeam/AdGuardHome/issues/2934
[#2946]: https://github.com/AdguardTeam/AdGuardHome/issues/2946
[#2947]: https://github.com/AdguardTeam/AdGuardHome/issues/2947
[#2952]: https://github.com/AdguardTeam/AdGuardHome/issues/2952
[#2954]: https://github.com/AdguardTeam/AdGuardHome/issues/2954
[#2961]: https://github.com/AdguardTeam/AdGuardHome/issues/2961
[#2981]: https://github.com/AdguardTeam/AdGuardHome/issues/2981
[#2994]: https://github.com/AdguardTeam/AdGuardHome/issues/2994

[doq-draft-02]: https://tools.ietf.org/html/draft-ietf-dprive-dnsoquic-02
[ms-v0.106.0]:  https://github.com/AdguardTeam/AdGuardHome/milestone/26?closed=1

## [v0.105.2] - 2021-03-10

### Security

- Session token doesn’t contain user’s information anymore ([#2470]).

See also the [v0.105.2 GitHub milestone][ms-v0.105.2].

### Fixed

- Incomplete hostnames with trailing zero-bytes handling ([#2582]).

- Wrong DNS-over-TLS ALPN configuration ([#2681]).

- Inconsistent responses for messages with EDNS0 and AD when DNS caching is enabled ([#2600]).

- Incomplete OpenWrt detection ([#2757]).

- DHCP lease’s `expired` property incorrect time format ([#2692]).

- Incomplete DNS upstreams validation ([#2674]).

- Wrong parsing of DHCP options of the `ip` type ([#2688]).

[#2470]: https://github.com/AdguardTeam/AdGuardHome/issues/2470
[#2582]: https://github.com/AdguardTeam/AdGuardHome/issues/2582
[#2600]: https://github.com/AdguardTeam/AdGuardHome/issues/2600
[#2674]: https://github.com/AdguardTeam/AdGuardHome/issues/2674
[#2681]: https://github.com/AdguardTeam/AdGuardHome/issues/2681
[#2688]: https://github.com/AdguardTeam/AdGuardHome/issues/2688
[#2692]: https://github.com/AdguardTeam/AdGuardHome/issues/2692
[#2757]: https://github.com/AdguardTeam/AdGuardHome/issues/2757

[ms-v0.105.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/32?closed=1

## [v0.105.1] - 2021-02-15

See also the [v0.105.1 GitHub milestone][ms-v0.105.1].

### Changed

- Increased HTTP API timeouts ([#2671], [#2682]).

- "Permission denied" errors when checking if the machine has a static IP no longer prevent the DHCP server from starting ([#2667]).

- The server name sent by clients of TLS APIs is not only checked when `strict_sni_check` is enabled ([#2664]).

- HTTP API request body size limit for the `POST /control/access/set` and `POST /control/filtering/set_rules` HTTP APIs is increased ([#2666], [#2675]).

### Fixed

- Error when enabling the DHCP server when AdGuard Home couldn’t determine if the machine has a static IP.

- Optical issue on custom rules ([#2641]).

- Occasional crashes during startup.

- The property `"range_start"` in the `GET /control/dhcp/status` HTTP API response is now correctly named again ([#2678]).

- DHCPv6 server’s `ra_slaac_only` and `ra_allow_slaac` properties aren’t reset to `false` on update anymore ([#2653]).

- The `Vary` header is now added along with `Access-Control-Allow-Origin` to prevent cache-related and other issues in browsers ([#2658]).

- The request body size limit is now set for HTTPS requests as well.

- Incorrect version tag in the Docker release ([#2663]).

- DNSCrypt queries weren’t marked as such in logs ([#2662]).

[#2641]: https://github.com/AdguardTeam/AdGuardHome/issues/2641
[#2653]: https://github.com/AdguardTeam/AdGuardHome/issues/2653
[#2658]: https://github.com/AdguardTeam/AdGuardHome/issues/2658
[#2662]: https://github.com/AdguardTeam/AdGuardHome/issues/2662
[#2663]: https://github.com/AdguardTeam/AdGuardHome/issues/2663
[#2664]: https://github.com/AdguardTeam/AdGuardHome/issues/2664
[#2666]: https://github.com/AdguardTeam/AdGuardHome/issues/2666
[#2667]: https://github.com/AdguardTeam/AdGuardHome/issues/2667
[#2671]: https://github.com/AdguardTeam/AdGuardHome/issues/2671
[#2675]: https://github.com/AdguardTeam/AdGuardHome/issues/2675
[#2678]: https://github.com/AdguardTeam/AdGuardHome/issues/2678
[#2682]: https://github.com/AdguardTeam/AdGuardHome/issues/2682

[ms-v0.105.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/31?closed=1

## [v0.105.0] - 2021-02-10

See also the [v0.105.0 GitHub milestone][ms-v0.105.0].

### Added

- Added more services to the "Blocked services" list ([#2224], [#2401]).

- `ipset` subdomain matching, just like `dnsmasq` does ([#2179]).

- ClientID support for DNS-over-HTTPS, DNS-over-QUIC, and DNS-over-TLS ([#1383]).

- The new `dnsrewrite` modifier for filters ([#2102]).

- The host checking API and the query logs API can now return multiple matched rules ([#2102]).

- Detecting of network interface configured to have static IP address via `/etc/network/interfaces` ([#2302]).

- DNSCrypt protocol support ([#1361]).

- A 5 second wait period until a DHCP server’s network interface gets an IP address ([#2304]).

- `dnstype` modifier for filters ([#2337]).

- HTTP API request body size limit ([#2305]).

### Changed

- `Access-Control-Allow-Origin` is now only set to the same origin as the domain, but with an HTTP scheme as opposed to `*` ([#2484]).

- `workDir` now supports symlinks.

- Stopped mounting together the directories `/opt/adguardhome/conf` and `/opt/adguardhome/work` in our Docker images ([#2589]).

- When `dns.bogus_nxdomain` option is used, the server will now transform responses if there is at least one bogus address instead of all of them ([#2394]).  The new behavior is the same as in `dnsmasq`.

- Post-updating relaunch possibility is now determined OS-dependently ([#2231], [#2391]).

- Made the mobileconfig HTTP API more robust and predictable, add parameters and improve error response ([#2358]).

- Improved HTTP requests handling and timeouts ([#2343]).

- Our snap package now uses the `core20` image as its base ([#2306]).

- New build system and various internal improvements ([#2271], [#2276], [#2297], [#2509], [#2552], [#2639], [#2646]).

### Deprecated

- Go 1.14 support.  v0.106.0 will require at least Go 1.15 to build.

- The `darwin/386` port.  It will be removed in v0.106.0.

- The `"rule"` and `"filter_id"` property in `GET /filtering/check_host` and `GET /querylog` responses.  They will be removed in v0.106.0 ([#2102]).

### Fixed

- Autoupdate bug in the Darwin (macOS) version ([#2630]).

- Unnecessary conversions from `string` to `net.IP`, and vice versa ([#2508]).

- Inability to set DNS cache TTL limits ([#2459]).

- Possible freezes on slower machines ([#2225]).

- A mitigation against records being shown in the wrong order on the query log page ([#2293]).

- A JSON parsing error in query log ([#2345]).

- Incorrect detection of the IPv6 address of an interface as well as another infinite loop in the `/dhcp/find_active_dhcp` HTTP API ([#2355]).

### Removed

- The undocumented ability to use hostnames as any of `bind_host` values in configuration.  Documentation requires them to be valid IP addresses, and now the implementation makes sure that that is the case ([#2508]).

- `Dockerfile` ([#2276]).  Replaced with the script `scripts/make/build-docker.sh` which uses `scripts/make/Dockerfile`.

- Support for pre-v0.99.3 format of query logs ([#2102]).

[#1361]: https://github.com/AdguardTeam/AdGuardHome/issues/1361
[#1383]: https://github.com/AdguardTeam/AdGuardHome/issues/1383
[#2102]: https://github.com/AdguardTeam/AdGuardHome/issues/2102
[#2179]: https://github.com/AdguardTeam/AdGuardHome/issues/2179
[#2224]: https://github.com/AdguardTeam/AdGuardHome/issues/2224
[#2225]: https://github.com/AdguardTeam/AdGuardHome/issues/2225
[#2231]: https://github.com/AdguardTeam/AdGuardHome/issues/2231
[#2271]: https://github.com/AdguardTeam/AdGuardHome/issues/2271
[#2276]: https://github.com/AdguardTeam/AdGuardHome/issues/2276
[#2293]: https://github.com/AdguardTeam/AdGuardHome/issues/2293
[#2297]: https://github.com/AdguardTeam/AdGuardHome/issues/2297
[#2302]: https://github.com/AdguardTeam/AdGuardHome/issues/2302
[#2304]: https://github.com/AdguardTeam/AdGuardHome/issues/2304
[#2305]: https://github.com/AdguardTeam/AdGuardHome/issues/2305
[#2306]: https://github.com/AdguardTeam/AdGuardHome/issues/2306
[#2337]: https://github.com/AdguardTeam/AdGuardHome/issues/2337
[#2343]: https://github.com/AdguardTeam/AdGuardHome/issues/2343
[#2345]: https://github.com/AdguardTeam/AdGuardHome/issues/2345
[#2355]: https://github.com/AdguardTeam/AdGuardHome/issues/2355
[#2358]: https://github.com/AdguardTeam/AdGuardHome/issues/2358
[#2391]: https://github.com/AdguardTeam/AdGuardHome/issues/2391
[#2394]: https://github.com/AdguardTeam/AdGuardHome/issues/2394
[#2401]: https://github.com/AdguardTeam/AdGuardHome/issues/2401
[#2459]: https://github.com/AdguardTeam/AdGuardHome/issues/2459
[#2484]: https://github.com/AdguardTeam/AdGuardHome/issues/2484
[#2508]: https://github.com/AdguardTeam/AdGuardHome/issues/2508
[#2509]: https://github.com/AdguardTeam/AdGuardHome/issues/2509
[#2552]: https://github.com/AdguardTeam/AdGuardHome/issues/2552
[#2589]: https://github.com/AdguardTeam/AdGuardHome/issues/2589
[#2630]: https://github.com/AdguardTeam/AdGuardHome/issues/2630
[#2639]: https://github.com/AdguardTeam/AdGuardHome/issues/2639
[#2646]: https://github.com/AdguardTeam/AdGuardHome/issues/2646

[ms-v0.105.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/27?closed=1

## [v0.104.3] - 2020-11-19

See also the [v0.104.3 GitHub milestone][ms-v0.104.3].

### Fixed

- The accidentally exposed profiler HTTP API ([#2336]).

[#2336]: https://github.com/AdguardTeam/AdGuardHome/issues/2336

[ms-v0.104.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/30?closed=1

## [v0.104.2] - 2020-11-19

See also the [v0.104.2 GitHub milestone][ms-v0.104.2].

### Added

- This changelog :-) ([#2294]).

- `HACKING.md`, a guide for developers.

### Changed

- Improved tests output ([#2273]).

### Fixed

- Query logs from file not loading after the ones buffered in memory ([#2325]).

- Unnecessary errors in query logs when switching between log files ([#2324]).

- `404 Not Found` errors on the DHCP settings page on Windows.  The page now correctly shows that DHCP is not currently available on that OS ([#2295]).

- Infinite loop in `/dhcp/find_active_dhcp` ([#2301]).

[#2273]: https://github.com/AdguardTeam/AdGuardHome/issues/2273
[#2294]: https://github.com/AdguardTeam/AdGuardHome/issues/2294
[#2295]: https://github.com/AdguardTeam/AdGuardHome/issues/2295
[#2301]: https://github.com/AdguardTeam/AdGuardHome/issues/2301
[#2324]: https://github.com/AdguardTeam/AdGuardHome/issues/2324
[#2325]: https://github.com/AdguardTeam/AdGuardHome/issues/2325

[ms-v0.104.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/28?closed=1

<!--
[Unreleased]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.75...HEAD
[v0.107.75]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.74...v0.107.75
-->

[Unreleased]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.74...HEAD
[v0.107.74]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.73...v0.107.74
[v0.107.73]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.72...v0.107.73
[v0.107.72]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.71...v0.107.72
[v0.107.71]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.70...v0.107.71
[v0.107.70]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.69...v0.107.70
[v0.107.69]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.68...v0.107.69
[v0.107.68]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.67...v0.107.68
[v0.107.67]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.66...v0.107.67
[v0.107.66]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.65...v0.107.66
[v0.107.65]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.64...v0.107.65
[v0.107.64]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.63...v0.107.64
[v0.107.63]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.62...v0.107.63
[v0.107.62]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.61...v0.107.62
[v0.107.61]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.60...v0.107.61
[v0.107.60]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.59...v0.107.60
[v0.107.59]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.58...v0.107.59
[v0.107.58]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.57...v0.107.58
[v0.107.57]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.56...v0.107.57
[v0.107.56]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.55...v0.107.56
[v0.107.55]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.54...v0.107.55
[v0.107.54]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.53...v0.107.54
[v0.107.53]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.52...v0.107.53
[v0.107.52]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.51...v0.107.52
[v0.107.51]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.50...v0.107.51
[v0.107.50]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.49...v0.107.50
[v0.107.49]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.48...v0.107.49
[v0.107.48]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.47...v0.107.48
[v0.107.47]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.46...v0.107.47
[v0.107.46]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.45...v0.107.46
[v0.107.45]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.44...v0.107.45
[v0.107.44]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.43...v0.107.44
[v0.107.43]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.42...v0.107.43
[v0.107.42]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.41...v0.107.42
[v0.107.41]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.40...v0.107.41
[v0.107.40]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.39...v0.107.40
[v0.107.39]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.38...v0.107.39
[v0.107.38]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.37...v0.107.38
[v0.107.37]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.36...v0.107.37
[v0.107.36]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.35...v0.107.36
[v0.107.35]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.34...v0.107.35
[v0.107.34]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.33...v0.107.34
[v0.107.33]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.32...v0.107.33
[v0.107.32]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.31...v0.107.32
[v0.107.31]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.30...v0.107.31
[v0.107.30]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.29...v0.107.30
[v0.107.29]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.28...v0.107.29
[v0.107.28]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.27...v0.107.28
[v0.107.27]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.26...v0.107.27
[v0.107.26]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.25...v0.107.26
[v0.107.25]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.24...v0.107.25
[v0.107.24]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.23...v0.107.24
[v0.107.23]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.22...v0.107.23
[v0.107.22]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.21...v0.107.22
[v0.107.21]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.20...v0.107.21
[v0.107.20]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.19...v0.107.20
[v0.107.19]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.18...v0.107.19
[v0.107.18]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.17...v0.107.18
[v0.107.17]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.16...v0.107.17
[v0.107.16]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.15...v0.107.16
[v0.107.15]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.14...v0.107.15
[v0.107.14]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.13...v0.107.14
[v0.107.13]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.12...v0.107.13
[v0.107.12]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.11...v0.107.12
[v0.107.11]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.10...v0.107.11
[v0.107.10]:  https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.9...v0.107.10
[v0.107.9]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.8...v0.107.9
[v0.107.8]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.7...v0.107.8
[v0.107.7]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.6...v0.107.7
[v0.107.6]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.5...v0.107.6
[v0.107.5]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.4...v0.107.5
[v0.107.4]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.3...v0.107.4
[v0.107.3]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.2...v0.107.3
[v0.107.2]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.1...v0.107.2
[v0.107.1]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.0...v0.107.1
[v0.107.0]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.3...v0.107.0
[v0.106.3]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.2...v0.106.3
[v0.106.2]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.1...v0.106.2
[v0.106.1]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.0...v0.106.1
[v0.106.0]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.2...v0.106.0
[v0.105.2]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.1...v0.105.2
[v0.105.1]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.0...v0.105.1
[v0.105.0]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.3...v0.105.0
[v0.104.3]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.2...v0.104.3
[v0.104.2]:   https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.1...v0.104.2